Construction work of Animal Birth Control Center (ABC) under Municipal Council Lakhisarai.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth )

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Supplying and Filling in plinth with local sand and under floors including,watering, ramming consolidating and dressing complete

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Providing and laying in position Cement Concrete of specific grade, excluding the cost of shuttering & centering. All works up to plinth level.Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate)

Providing and laying in position machine batched ,machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Providing and laying in position machine batched,machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.

Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for :

Columns, Pillars, Piers, Abutments, Posts, Struts

Suspended floors, roots, landings, balcnies and access platform.

Brick work with bricks of class designation 100A in foundation sand plinth in :

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4(1cement:2:2 coarse sand :4 graded stone aggregate 20mm nominal size)

Brick work with bricks of class designation 100A in foundation sand plinth in :

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to penings/ wooden frames with rawl plugs screws etc

Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand)

Cement Plaster in coarse sand 15mm thick cement plaster of mix (1 : 6 ) Outer Wall

6 mm cement plaster to ceiling of mix :

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade. New Work (three or more coat)

Providing and fixing M.S. Fan clamp type 1 of 16 mm dia M.S. Bar bent to shape with hooked ends in R.C.C. Slab during laying including painting the exposed portion of loop all as per standard desing complete.

Painting on steel surface grill with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade new work (Two or more coats) including a coat of approved steel primer but excluding a coat off mordant solution.

Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, withnecessary screws etc. complete: 125 mm

Litre

liter