Construction of isolation shed for Goats at ICAR RCER Patna

Amount

Sub Heading 1

Surface dressing of ground include removable ofVegetation and inequalities not exceeding 15cm depth and disposal of rubbish, lead upto 50m and lift upto1.5m.Total Area = 12x42=504sft=~46.84sqm.

Excavation work by mechanical means / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock. Total = (5”x5”x1’6”x5)+5”x80x1’=33.64cft=3.36cum

Dry brick edge flooring in required pattern with of bricks of class designation 7.5 on a bed of 12mm mud mortar including filling joints with Ganga sand with common burnt clay non modular brick 80x5”+40x10+10x2x2=472.8sft=43.94sqm =44sqm

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. 40 sqm

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type 45x45x5mm 45m=149kg 40x40x5mm 44m=132kg total =281kg+28=309

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Total=41x11=451sft=~41.91qm=42

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturersspecificationsPainting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture Total area=6sqm

Half brick masonry with bricks of class designation 100B in superstructure above pinth level upto floor V level.C:M 1:4 14sqm

15mm cement plaster of mix.1:3 (1 cement: 3fine sand) 24 sqm

Colour washing such as green, blue or buff to give an even shade .New work (two or more coats) with a base coat of white washing with lime. 23sqm

Goods and Service Tax @ 18%

SHRI RAM ENTERPRISES (BID ID -3189470)

Jitu Kumar (BID ID -3189395)