Design, Supplying, Installation, testing and commissioning of

Amount

Design, supplying,Installation, Testing and commissioning of manufacturer panel board fabricated out of 2 mm thick sheet steel as per spectifications. The panel shall be complete with cable termination arrangement suitable for incoming and outgoing each 1 run x 3c x 240 sqm XL PE 11KV cable and copper bus bar arrangement . The panel shall comprise of the following:

Single Panel Board At Entrance:

Incomer:

1 No. 11 KV 630 A 25KA drawout type VCB with motorised spring charge machanisum for 240 V AC, closing& tripping coil suitable for 24 V DC

Each incomer comprising with following accessaries

1 No Mechanical ON/OFF indicator

1 No. Aux Swich 6 NO+6 NC

Panel Busbar,CT,PT

1 No. Fully compartmentalised sheet steel enclosure floor mounting type with automatic safty shutters, independent pressure discharge flaps, PVC sleeved busbar , etc , with provision for terminating PVC/PILC/XLPE cable

3 Nos. Resin Cast CTs100/1-1A with Core 1: 7.5 VA CL 1 Core 2: 7.5 VA CL 5P10

3 Nos. PT- 11 KV/√3/110/√3V,CL 1.0, 50 VA

Breaker Panel Indication Lamps:

6 Nos. ON/OFF/TRIP/TRIP Ckt Healthy Spring Charged

Switches and other Accessories

8 Nos.Fuess

1 No. Heater

1 No. Thermostat

1 No. 6 Window Annunciator

1 No. Plug & Socket

1 No. Test Terminal Block

1 No. T-N-C Switch

1 no Emergency Push Button

1 No. Earth Switch

Meters

1 No. Analog Ammeter+ASS

1 No. Analog Voltmeter + VSS

1 No. Digital Multifunction Meter

Relays

1 No. (O/C + E/F- IDMT+Inst

1 No. AVAJH13 Master Trip relay

1 No. TCS Relay

Power Pack

24 Volt DC 180 AH supply system comprising of one set of batteries and battery charger with Boost Charger and float charger complete suitable for operating the control devices of HT Pannel

DQBYDT PVT LTD