SPECIAL REPAIR TO BLDG NO T-21, T-90, T-105, T-109 AND T-321 OF CERTAIN UNITS OF HQ N AREA UNDER GE CHANDIGARH

Amount

Taking down chowkhats or frame not exceeding 1.5 Sq. m with shutter(s) (without taking off shutters from the frame), including hole fast Cutting holes into through brick wall and making good to dismantled portion in CM (1:3) or PCC (1:2:4) complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutter from frame)exc 1.5 Sqm but exc 4 sqm each with mongry including hole fast Cutting holes into through brick wall and making good to dismantled portion in CM (1:3) or PCC (1:2:4) complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and removal complete all as specified and as directed.

Taking down shutters and refixing of shutter of any description exc 1 sqm and n exc 2 sqm each and removal complete all as specified and as directed.

M&L for Pressed steel frames of profile size 125mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including cutting hole fast fixed to wall in cement concrete PCC 1:2:4 ( Type B-0) using 12.5 mm graded aggregate as in fillets including one shop coat of red oxide primer complete all as specified and as directed.

M&L for Pressed steel frames of profile size 105mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including cutting hole fast fixed to wall in cement concrete PCC 1:2:4( Type B-0) using 12.5 mm graded aggregate as in fillets including one shop coat of red oxide primer complete all as specified and as directed.

Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated as per SSR Part-1 including one shop coat of primer complete all as specified and directed.

Supply and fix 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats including one shop coat of primer complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handle fabricated type anodized complete all as specified and as directed.

S&F 200 mm long aluminium anodised extruded section tower bolts with plate, staple & bolt and fixed to shutter complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm with single side prelam PVC sheet plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F factorymade Solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with wood free EPS, supplying & fixing in frame at site as per specification & drawing

M&L for preparation of new wooden surface, of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint ( Ist quality) over and including a coat of pink primer complete all as specified and as directed.

M&L for prepartation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new steel surface, of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint ( Ist quality) over and including a coat of shop coat primer complete all as specified and as directed.

M&L for preparation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work complete all as specified.

M&L Brick work using sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4) complete all as specified.

Brick work with sub class 'B' bricks, class Designation 10 straight or curved on plan exc 6m mean radius built in cement mortar 1:6 EXCEPT BRICKS complete all as specified and as directed.

Dismantling wrought iron or mild steelwork of any description not otherwise provided for complete all as specified and directed.

Supply and fix mild steel work in angle/tubular trusses/purlins /rafters including provn of new nut bolts special shaped washer etc.complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St.-240 complete all as specified and directed.

M&L angle/rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as specified and directed

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheet into these grooves complete all as specified.

M&L for pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate), as in leveling concrete in floor finished even & rough finish complete all as specified & directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified.

M&L for 16 to 18 mm thick green marble machine cut stone slab (table rubbed polished) as in flooring & riser setted window cill step etc jointed with cement slurry and bedded over & including 20mm thick cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.

M&L for 20 mm thick granite machine cut stone slab (table rubbed polished) as in jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.

M&L Machine cut Kota stone slab flooring 20 mm thick, area of each slab exceeding 0.30 sq.m, (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:4) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete, all as specified.

M&L Kota stone slab 20 cm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish), complete all as specified.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement on walls in cement mortar (1:6), complete all as specified.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified. Note: Water proofing compound will be paid seprately.

M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified.

Supply only water proofing compound, complete all as specified.

M&L for preparation of newly plastered or un-plastered wall surfaces of any description and applying two coat of oil bond distemper over and including wall care putty of 1mm thick & one coat of primer complete all as specified.

M&L for applying two coats of weather coat (Apex) internal/externel wall surface over and including one coat of primer coats of damp shealth to new wall surface complete all as per specified.

M&L for providing and applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/zinc chrome primer, IN REPAIRS, including Cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/ zinc chrome primer, IN REPAIRS, including cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified.

S&F for plain Sheet glass 4 mm thick, ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. mm in each pane complete all as specified.

M&L for framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 gde E-165, complete all as specified.

M&L Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with wire staples, complete all as specified.

M&L for preparation of old decorated plastered of walls surfaces by rubbing down,washing,& stopping of distempered surfaces and applying one coat of oil bound distemper (Ist quality) over and including chalk whiting, on plastered surfaces complete all as specified and as directed.

M&L for complete removal of external treatment and applying two coats of weather coat (Apex) wall surface over and including one coat of primer coats of damp shealth to wall surface as per complete all as specified.

Dismantling of walls and ceiling boards/wall paneling or insulation board any thickness, including cover fillets complete all as specified and directed

M&L for providing and fixing Gyp board panel laminated with texture vinyl coated paper tiles of size 595mmx595mmx10mm thick as in ceiling having snap grid 600mmx600mm including GI wall angle of size 24mmx24mmx0.43mm thick along with perimeter of ceiling, fixed to walls/ partition with the help of nylon sleeves at 450mm centre to centre, suspending intermediate Tee section of size 24mmx38mmx0.35mm thick and cross Tee-section 24mmx25mmx0.3mm thick suspended from soffit of ceiling at up to 900 mm centre to centre or adjustable as required at site.4mmdia GI wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all fittings complete all as specified and directed

S&F PVC lower wall panelling of 5 mm including all necessary fitting frame work etc completed all as specified by Engr-in - Charge

S&F in repairs SS drapery rods (fancy type) 25mm in dia with end SS brackets & funnels fixed with rawl plug and screws, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and as directed

M&L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base/Path complete all as specified and directed.

S&F endora tile good grip series 300X300X8-10mm thick consinehas of colour set in neet cement slury on 15mm thick screed bed in CM 1:6 and pointed with pigment complet all as specified and directed.

Material & labour for 80mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment over & including including 50 mm thick ( compacted thickness ) sand cushioning and joint filled with sand complete all as specified and directed.The Interlocking Paver blocks shall be procured directly from one of the Manufacturers specified. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.

M&L 75 mm thick, cement concrete type C-2, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth complete, as in plinth protection, complete all as specified.

M&L for Providing, 50 mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as in floor finishes finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for waterproof topping of 25 mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as specified(incroporating an approved metalic floor hardner), laid on concrete floors @ 3 kg/per sqm pavings and finished even and smooth (except metallic hardner)

Supply only metallic floor hardener complete all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles. The tiles shall be laid in pattern with two or more colured tile including rendering 10 mm thick on brickwork or concrete surfaces finished even and fair in CM (1:4 ) combinations all as directed.

M&L for Non skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm laid as in floors/skirting, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles as directed by Engr-In-charge.

M&L for Non skid Ceramic coloured tiles 8 mm to 9 mm thick (square rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm laid as in floors, set and jointed with cement slurry over & including 15mm thick bedding of layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Demolition of reinforced cement concrete any thickness all as specified.

M&L Reinforced cement concrete, type A-1 (1:1½:3), using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, chajja, drilling, weilding in old steel, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified.

M&L Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L tubes 15 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified.

S&F tubes 20 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified.

S&F tubes 15 mm bore, ‘medium grade’, galvanized with all fittings (Except pipe) and fixed complete to walls and ceilings or laid in floors, complete all as specified.

S&F tubes 20 mm bore, ‘medium grade’, galvanized with all fittings (Except pipe) and fixed complete to walls and ceilings or laid in floors complete all as specified.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

Dismantling of water tank of capacity exc. 500 & n.exc. 1000 ltrs and removing to store complete all as specified.

S&F in repairs 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (triple layered cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S&F Ball valves, high pressure PTMT with epoxy coated polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed and suitable for 20 mm bore GI pipe, IN REPAIR, complete all as specified.

S&F tank nipple suitable for HDPE for water storage tank of size 20 mm bore in repair complete all as specified.

S&F Gun-metal ball valve (quarter turn type) with MS lever handle, suitable for GI tubes 15 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified.

S&F Gun-metal ball valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified.

S&F for stop valves/angle valve, fancy type, chromium plated 15mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified.

S&F Bib taps, cast copper alloy with handle, chromium plated fancy type, short body with wall flange screwed down, suitable for 15 mm bore pipe, IN REPAIR complete all as specified.

Supply & fix in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.

S&F for pillar taps for mixing hot & cold water screwed down for iron pipe and fixed, screwed for iron pipe and fixed suitable for 15 mm bore pipe, IN REPAIR, complete all as specified and directed.

S&F Waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm) IN REPAIR, complete all as specified.

S&F PVC waste pipe 800 mm long suitable for 32 mm dia waste coupling, IN REPAIR, complete all as specified.

S&F PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs IN REPAIR, complete all as specified.

S&F in repairs towel ring chromium plated 150mm dai complete all as specified and directed.

S&F for CP grating 125 mm dia with waste hole/with out hole Complete all as sepcified.

S&F for pegset 6 Nos pegs, ISI marked and fixed with standard aluminium screws complete all as specified.

S&F for CP soap dish in repair of complete all as specified and as directed.

S&F for CP paper holder in repair of complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm IN REPAIR, complete all as specified.

S&F Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes IN REPAIR, complete all as specified.

S&F chromium plated health fucet with hook, including suitable length of PVC connection pipe , fixed in repair complete all as specified and as directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, including jointing to waste pipe set in cement concrete IN REPAIR, complete all as specified.

S&F Kitchen S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm IN REPAIR, complete all as specified.

Supply & fix in repairs squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc making good to match with existing surfaces complete all as specified and directed.

S & F vitreous china wash down water closet (pedestal pattern) white with ‘ and including CI P’ or ‘S’ trap, plastic seat cover white and connection to out going pipe & to flushing pipe, anti-syphonage pipe and jet fixed etc as in repair complete all as specified and as directed.

S&F 10 ltr capacity PVC flushing cistern syphonic action type white dual flush ISI (IS 7231) marked with flush pipe in repair complete with all fixing arrangements complete all as specified and directed.

S&F Vitreous China wash basin with pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts, IN REPAIR, complete all as specified and directed.

Demolition & breaking of AC/PVC rain water 110mm dia set in cement mortar & removing from site completed all as specified & directed.

S&F for 110mm dia PVC (SWR) pipe pressure rating, ISI Marked fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.

S&F for 75mm dia PVC (SWR) pipe pressure rating, ISI Marked fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.

S&F for PVC (SWR) junction single,Tee 75mm bore equal or unequal complete all as specified and directed.

S&F for PVC (SWR) junction single,Tee 110mm bore equal or unequal complete all as specified and directed.

Supply and fixing PVC bends plain (any radius) for 75mm bore PVC pipes complete all as specified and directed.

Supply and fixing PVC bends plain (any radius) for 110mm bore PVC pipes complete all as specified and directed.

S&F 5 mm thick sheet glass pane tinted type, with 5 micron thick black film ordinary quality and ruber, cleting, silicone,glazing with oil putty etc in each pane complete all as specified and directed.

S&F aluminium powder coated (min thickness of powder coating 50 micron) 3mm thick frame for door, windows, ventilators with one or more rebates including joining cleat/aluminium beading for fixing etc complete all as specified.

S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium door shutters, of aluminium section including necessary joining cleats/aluminium beading, glazing clips clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, glazing bars and without glazing bars shutter aluminium sections weighing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

Taking down rolling shutters of any description exc 2 sqm and n exc 15 sqm each and removal complete all as specified and as directed.

SF for steel rolling shutters with 1.25mm thick laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, inclding complete gear operated type with bevel gear box and crank handle ,safety lever locks mild steel with 4 levers in repairs .complete all as specified and as directed.

M&L for complete removal of existing treatment and preparing of old surfaces of walls applying two coat of cement base paint over and including one coat primer on wall surfaces of any description complete all as specified and directed.

M&L for preparation of old surfaces plastered or un plastered wall surfaces of any description and applying two coats of white wash complete all as specified.

Dismantling timber scantling 40 Sqcm and over in section including trusses in any position complete all as specified and directed.

M&L for Point wiring with 1.5Sqmm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable PVC insulated ISI marked unseathed FRLS dolly in existing concealed/surface conduit including concealed in wall, modular MS Box, 1.6mm thick with modular cover plate with frame as required at site suitable for modular switch, socket, fan regulator, bell push, two way etc for One light/ceiling fan/exhaust fan/bell point controlled by one switch. . NOTE : (i) Modular switch socket fan regulator shall be measured and paid separately under respective items. (ii) Cost of mudular MS Box, codular cover plate an frame of any modules as required at site and as directed by engineer-in-charge is deemed to be included in the quoted rates.

All as per Item No 118 above but one socket 5 Amp point Independent board.

All as per Item No 118 above but one socket 5 amp on Same board.

All as per Item No 118 above but but wiring with 4 Sqmm for 15 Amp socket outlet point on independent.

Taking down Copper / aluminium point wiring ( light, fan, socket, or power ) complete, incl fixture and fitting such as switches, ceiling roses, pendants, regulators sockets, light fittings etc. removing materials to store for keeping in safe custody or for making credit and making good disturbed surfaces of walls, floors etc. complete all as specified.

S&F ceiling rose surface bakelite 65x50mm three terminals complete all as specified ISI marked.

Supply and replacement of socket 3 pin 5 Amp and 3 pin 15 Amps flush type (ISI marked), complete all as specified.

Supply and replacement of switch piano 15 Amps single pole, AC, 230V flush type ISI marked.

Supply and replacement of socket 5 pin 5 Amp flush type (ISI marked), complete all as specified.

Supply and replacement of switch piano 5 Amps single pole, AC, 230V flush type ISI marked.

S&F bell push 5 Amp flush type complete all as specified.

M&L for Sub main wiring with two single core FRLS 6 sqmm and one single core 4.00 sqmm as earth continuity cable PVC insulated multi-stranded copper conductor drawn through M&L for FR PVC conduit and inclduding connection at both ends with copper lugs. Colour code for Phase - Red/ Yellow/ Blue, Neutral - Black and Earth - Green complete all as specified.

M&L bell electrical ding dong 5 Amp 230 volt complete all as specified.

S & F LED Recess mounting downlight 2x2 ft decorative type of 15 W WHITE light and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete as directed by Engr in charge

Taking down and replacement of factory made sheet metal enclosure for distribution board double door type (Fixed to the wall), single pole and netural with 200 Amp rated bus bar, 8 way suitable for having MCB’s complete all as specified.

S&F MCB Isolator of rating 240 volts, SPN, 40 Amps incl taking down complete all as specified and directed.

S&F in repair MCB, SP, 240V, 5 to 32 Amps incl taking down complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate, electrode 60cm x 60cm x 6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth plate electrode surrounded by mixer of common salt and charcoal dust, including 20mm dia GI watering pipe ‘medium grade’, funnel with wire mesh, earthing chamber with cement concrete (1:2:4) type B-1, RCC chamber cover 80mm thick (1: 1 ½ : 3) type B1, excavation & earth work all as shown in electrical plate No 3 of SSR (Part-I) and testing on completion, complete all as specified and directed.

S&F Fan regulator & Dimmer Fan step regulator 120 volt / 280 volt single phase ISI marked Complete all as specified and as directed by Engineer in Charge.

S&F as in repair batten for LED tube light 1X20 watts LED, 230Volt energy saving recess, industrial batton type, powder coated, CRC Sheet complete with all as accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Complete all as specified and as directed by Engineer in Charge.

Supply and Fixing lamp holder, angular type,(With lamp 9 watts ) PVC/ polycarbonate with back plate of capacity 5 Amps 230 volts suitabel for general lighting system complete all as specified and as directed.

Supply and fix exhaust Fan 300mm sweep (5 Star BEE rating), 900 RPM, single phase, 230 Volts heavy duty with louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, and making good the disturbed surfaces as per existing complete all as specified and directed. Make:-Havells/crompton/Usha

M&L Making of square / circular hole 350mm in the stone masonry/Brick wall suitable for fixing exhaust fan of 300 mm sweep.including M.S Frame work of suiable size with nut,bolts etc and sealing the sides of exhaust fan complete all as directed.

S&F mirror light sleek LED mirror light provided with high output diffuser with suitable capacity driver with all comptonants as per manufacturer with 3 core flexible cord from ceiling rose to connector of fitting etc complete all as specified and directed .

SHRI GANESH CONSTRUCTION CO.

MS SACHDEVA BUILDERS

M/S MATLOOB AHMED

M/s Super Trading Corporation

M/s REEDIT CONSTRUCTION

RAJESH KUMAR

Bidder Name

M/S MATLOOB AHMED