WELCOME MAINTENANCE AND REPAIR PLUMBING, SAINTARY FITTING, JOINERY, SUNKEN TREATMENT FOR OMQS IN DOMESTIC AREA AT AF STATION CHANDIGARH

Amount

M&L disconnecting existing water tanks of capacity exceeding 250 litres but not exceeding 500 litres, draining out of water, setting aside (or lowering if required) for repair/ cleaning and removing accumulated sludge/ dirt scales from bottom & sides and from mouths of circulating pipes of service tanks located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground ‘Cleaned on (date)’; height of words 100mm and hoisting if required, refixing and reconnecting in position after cleaning complete all as specified and directed.

M&L disconnecting existing water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, draining out of water, setting aside (or lowering if required) for repair/ cleaning and removing accumulated sludge/ dirt scales from bottom & sides and from mouths of circulating pipes of service tanks located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground ‘Cleaned on (date)’; height of words 100mm and hoisting if required, refixing and reconnecting in position after cleaning complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for resecuring or easing and adjusting shutters of any description exceeding 01 sqm but n. exc. 2.00 sqm each without taking down shutter of any description complete all as specified and directed.

S&F in repairs rotational moulded polyethylene triple layer water storage tanks (cylindrical vertical with closed top) of capacity 500 Ltr including inlet pipe, outlet pipe, drain pipe with plug and 20mm dia (PTMT high pressure wt 210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs rotational moulded polyethylene triple layer water storage tanks (cylindrical vertical with closed top) of capacity 1000 Ltr including inlet pipe, outlet pipe, drain pipe with plug and 20mm dia (PTMT high pressure wt 210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

M&L 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc including taking down old one complete all as specified and directed.

M&L for Anti termite treatment to wood and wood based material by drilling hole in the direction of 45 degree 150mm to 200mm deep at minimum 300mm distance in consecutive hole and applying emulsion of chemical of PREMISE or PAXTON mixed with water in the ratio of 1:20 by spraying machine minimum 250ML to 300ML emulsion should be insert in the each hole and for that 3 to 4 round spraying to be done. Finally the chemical will be mixed with white cement and make it just like the paste and insert in the hole for the closing and better results etc complete all as specified and directed.

S&F Ball valves (for 20mm dia bore pipe) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-20mm-210gms.), complete all as specified and directed.

S&F in repair, Ball valves(for 20mm dia bore pipe) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-20mm-210gms.), complete all as specified and directed.

Taking up or down steel tubing and connections, size 15mm dia bore, including for refixing or removal to stores, complete all as specified and directed.

Taking up or down steel tubing and connections, size 20mm dia bore, including for refixing or removal to stores, complete all as specified and directed.

Taking up or down steel tubing and connections, size 25mm dia bore, including for refixing or removal to stores, complete all as specified and directed.

M&L galvanised mild steel tubing, 'medium grade' with all fittings and fixed complete to wall and ceiling or laid under floor, 15mm dia bore pipe, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

M&L galvanised mild steel tubing, 'medium grade' with all fittings and fixed complete to wall and ceiling or laid under floor, 20mm dia bore pipe, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

M&L galvanised mild steel tubing, 'medium grade' with all fittings and fixed complete to wall and ceiling or laid under floor, 25mm dia bore pipe, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of first quality oil emulsion distemper over and including one coat of chalk whitening preparatory to distempering complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of first quality oil emulsion distemper over and including one coat of chalk whitening preparatory to distempering complete all as specified and directed.

M&L for preparation of old plastered/ unplastered surfaces of walls including brooming down or steel wire brushing, scraping down smoke soots, moss and efflorescent salts and trading oil and greasy spots etc. washing, rubbing down and stopping of surfaces using sand paper and applying two coats of oil bond distemper, complete all as specified and directed.

M&L for preparation of old plastered/ unplastered surfaces of ceiling including brooming down or steel wire brushing, scraping down smoke soots, moss and efflorescent salts and trading oil and greasy spots etc. washing, rubbing down and stopping of surfaces using sand paper and applying two coats of oil bond distemper, complete all as specified and directed.

M&L for brick work with sub class 'B' old size brick, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) including demolition of old brick work complete all as specified and directed.

M&L for rendering 15mm thick plaster in cement mortar (1:4), on brick/concrete surfaces of walls, including water proofing compound as per manufacturers instruction @3% of cement weight, complete all as specified and directed.

M&L for rendering15mm thick plaster in cement mortar (1:6), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, including taking down old plaster complete all as specified and directd.

M&L for rendering15mm thick plaster in cement mortar (1:4), on brick/concrete surfaces of walls, including taking down old plaster complete all as specified and directed.

M&L for rendering 10mm thick plaster in cement mortar (1:3), on brick/concrete surfaces of facia, facade, roof ceiling and chajja etc finished even and fair without using extra cement, including taking down old plaster complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removing debries outside MD land complete all as specified and directed.

M&L for plain cement concrete (1:2:4), type B-0 (using 12.5mm graded crushed stone aggregates) as in roof kerb, benching, venching, padding and like, including water proofing compound as per manufacturers instruction @3% of cement weight, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

M&L for Providing, plain cement concrete(1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,including water proofing compound as per manufacturers instruction @3% of cement weight, upto and including four storey bldg height 12.8mtr height,including necessarry scafolding complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

M&L for preparation of old plastered surfaces of wall and apply one coat of oil bound distemper over complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and apply one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of old wooden or wood based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old plastered/unplastered surfaces of ceiling and brooming down or steel wire brushing, scraping down smoke soots, moss and effloresncet salts and trading oil and greasy spots etc. washing, rubbing down and stopping of surfaces using sand paper and applying one coats of white wash, complete all as specified and directed.

M&L for Preparation of old plastered/unplastered surfaces of wall and brooming down or steel wire brushing, scraping down smoke soots, moss and effloresncet salts and trading oil and greasy spots etc. washing, rubbing down and stopping of surfaces using sand paper and applying one coats of white wash, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coat of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

M&L for preparation of old painted steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and directed.

S&F in repairs 12mm thick both side printed solid PVC plastic ply sheet and 5mm thick printed heat moulded 'C channel as in shelves, partition, and cup board shuter etc. Incliding taking down old one complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection, laid to slope of 1:20, finished fair & even, with and including 10mm wide joints to full depth @ 2.5m c/c and at corners, filled with mastic mortar, complete all as specified and directed.

Dismantling floor, hearth or wall tiling or paver blocks,chequered tiles etc including cement mortar bedding and removing rubbish off the premises of MoD land, complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7mm to 8mm thick(squaqre orrectangular) area of each tile exceedimg 0.11Sqm but not exceeding 0.18Sqm, in floor etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM(1:6), complete all as specified and directed.

M&L for first quality glazed designer pattern coloured ceramic tiles of size 450mmx350mmx7mm or 450mmx300mmx7mm thick fixed in pattern to wall(combination of dark and light colour with border) as in skirting, dado, over 10mm thick cement plaster(1:3), including backing coat and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for vitrified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. in light shade set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM(1:4), complete all as specified and directed.

M&L for vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting, dado wall tiling etc. in dark shade/double charged, over 10mm thick cement plaster(1:3), including backing coat and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for cutting chases, pinning in brick, stone or concrete surfaces of wall, floor or slab and making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed water tubing and making good, cutting not exceeding 10cm girth, and removal of rubbish out side MoD land, complete all as specified and directed.

Dismantling of cast iron work of any description and any position complete all as specified and directed.

M&L for cast iron floor trap, 75mm dia of out let,ISI marked, with mild steel chromium plated grating, including jointing to waste pipe in plain cement concrete(1:2:4) type B-1, complete all as specified and directed.

M&L for cast iron floor trap, 100mm dia of out let,ISI marked, with mild steel chromium plated grating, including jointing to waste pipe in plain cement concrete(1:2:4) type B-1,complete all as specified and directed.

S&F cast iron bends 100mm dia bore, diminishing pieces or tapers ISI marked, complete all as specified and directed.

S&F cast iron bends 75mm dia dia bore, diminishing pieces or tapers ISI marked, complete all as specified and directed.

S&F 75 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, with oval access door complete all as specified.

S&F 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, with oval access door complete all as specified.

S&F 100mm dia bore cast iron(Sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixing to walls with suitable clamps, complete all as specified and directed.

S&F 75mmdia bore cast iron(Sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixing to walls with suitable clamps, complete all as specified and directed.

S&F in repair, vitreous china half stall type white including providing fixing plugs, bedding urinals against wall in cement mortar 1:2,securing urinal to plug with and including 60 mm long brass screws, pointing around urinal back including waste coupling PTMT half or full threaded suitable for urinals, complete all as specified and directed.

S&F in repair wash basins, Vitreous China (flat back type) 550x400mm in size, including cutting for and pinning in ends of brackets or erecting stand, fixing of supply and waste pipe, including Waste coupling of PTMT (half or full threaded)(Minimum weight 32mm- 45gms and taking down old and removal, complete all as specified and directed.

S&F in repair vitreous chinaware wash down water closet squatt pan (Orissa pattern/Indian type) of size 580mmx440mm, white, with integral foot rests (excluding flushing cistern and flush pipe) but including 100mm CI ‘P’/’S’ trap), set and jointed including embedding concrete, and taking down old and removal, complete all as specified and directed.

S&F in repair, vitreous china wash down water closet EWC (pedestal pattern) white including fixing bolts, plastic seat and cover white with mild steel chromium plated or anodised hinging devices, connected to drain outlet, and removal old from site,complete all as specified and directed.

S&F Plastic water closet seat black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, fixed in repairs,complete all as specified and directed.

S&F in repair, PVC low level, white, flushing cistern valveless, symphonic action type, 10 litre capacity with inlet, ball valve, float and handle including PVC flush pipe 32mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connection to water supply pipe line and WC, complete all as specified and directed.

S&F in repair stop angle valve, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down , screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down , screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair, bib taps long body(fancy type), cast copper alloy chromium plated with capstan head, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore,complete all as specified and directed.

S&F in repair, pillar taps, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm dia bore as in repairs and fixed with WHB and connection to iron pipe, including taking down old and removal, complete all as specified and directed.

S&F towel rail 600mm long(between flanges), 20mm dia 'D' type, chromium plated brass, fixed to walls with screws and plastic cleats, fixed as in repairs, complete all as specified and directed.

S&F PVC connections of PTMT, non-corrosive, with nuts & washers on both ends, 450mm long suitable for 15mm dia bore pipe, fixed as in repairs, and removal of old from site, complete all as specified and directed.

S&F PVC connections of PTMT, non-corrosive, with nuts & washers on both ends, 600mm long suitable for 15mm dia bore pipe, fixed as in repairs, and removal of old from site, complete all as specified and directed.

S&F in repairs stainless steel sinks with drainage board made out of 1.00mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32mm dia and making good to disturbed surfaces complete all as specified and directed.

S&F grating 125mm dia (Minimum weight 40 gms) with or without waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed in repairs, complete all as specified and directed.

S&F PTMT waste coupling suitable for 32mm dia bore discharge pipe & flexible pipe suitable for WHB/Urinal, fixed in repairs, complete all as specified and directed.

S&F PVC flexible waste pipe suitable for WHB/Sink/Urinal, fixed as in repairs, complete all as specified and directed.

S&F Brass CP shower rose 125 mm size with or without swivel joints including fixing with 15 mm bore pipe, fixed in repairs, complete all as specified.

S&F stainless steel Chromium plated jet including PVC pipe of suitable length for European/ pedestal type WC including all accessories, as in repairs, complete all as specified and directed.

S&F Chromium plated soap dish, as in repairs, complete all as specified and directed.

S&F brass CP wall mixer with telephone shower arrangement 15mm bore for mixing hot or cold water screwed down for iron pipe for wall, including connections to shower and making good the disturbed surfaces, as in repairs, complete all as specified and directed.

S&F brass CP mixer mixing hot or cold water screwed down for iron pipe for WHB, including connections to WHB and making good the disturbed surfaces, as in repairs, complete all as specified and directed.

S&F in repair, 20mm dia bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair, 15mm dia bore stop valves, cast copper alloy chromium plated fancy type, screwed down, high pressure, with long shank and cup(concealed type), screwed both ends for iron pipe or for unions and fixed, including cutting to wall tiles or brick work and making good the disturbed portion in cement mortar 1:3, complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm each with shutters without taking off shutters from the frame and removing from site as in schedule of credit, complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters without taking off shutters from the frame and removing from site as in schedule of credit, complete all as specified and directed.

Taking down shutters of any description n.exc 1.00sqm each and removing from site as in schedule of credit, complete all as specified and directed.

Taking down shutters of any description exc 1.00sqm and not exceeding 2.00Sqm each and removing from site as in schedule of credit, complete all as specified and directed.

M&L for cutting holes in brick walls built in cement mortar for inserting holdfasts, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, complete all as specified and directed. (Note:- Item applicable for insertion of hold fasts at new position only)

S&F factory made pressed steel frames for doors with two rebates, size of frame 125mmx60mm, made out of 1.25mm thick MS sheet, including necessary fixing lugs, hinges, lock strick plate, etc, complete all as specified and directed.

M&L Plain Cement Concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregate filled inside the pressed steel frame and for fixing of hold fast, complete all as specified and directed.

S&F factory made flush shutters, 35mm thick, with block board core and plywood face panels, commercial type on both faces, complete all as specified and directed.

S&F factory made box type steel window with two nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed

S&F factory made box type steel window with two Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars, including flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F in opening solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face complete all as specified and directed.

S&F butt hinges, extruded aluminium alloy, anodised, with galvanised mild steel hing pin, type C-21,100mm size, ISI marked, complete all as specified and directed.

S&F 150mm long, aluminium anodised, barrel tower bolts of extruded section and fix to wooden or PVC doors, complete all as specified and directed.

S&F 200mm long, aluminium anodised, barrel tower bolts of extruded section and fix to wooden or PVC doors, complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type , anodised, complete all as specified and directed.

S&F 125mm long extruded aluminium alloy handles, fabricated type , anodised, complete all as specified and directed.

S&F sliding door bolts 300mm long of extruded sections aluminium alloy, anodised, with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy dia of bolt notless than 12mm, complete all as specified and directed.

S&F sliding door bolts 250mm long of extruded sections aluminium alloy, anodised, with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy dia of bolt not less than 12mm, complete all as specified and directed.

S&F 300mm long ordinary rat rail rod pattern MS door springs including roller and roller plate, as in repairs, complete all as specified and directed.

M&L for 50mm thick plaster of paris (POP) cornices to junction of wall and ceiling, including preparation of surfaces to receive cornices and finishing the disturbed surfaces to match with similar specification as exists, design and pattern of cornices complete all as specified and directed.

S&F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 6 & n. exc 13 Sqcm, clean swan, wrought finished secured with screws, complete all as specified and directed.

S&F in repair continuous (piano) hinges of mild steel, brigth finish or electro galvanised, width of flap 30mm, complete all as specified and directed.

S&F continuous (piano) hinges of mild steel, brigth finish or electro galvanised, width of flap 30mm, complete all as specified and directed.

S&F hasp and staples, 100mm size, safety type, aluminium anodised with mild steel hing pin, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repair, hasp and staples, 100mm size, safety type, aluminium anodised with mild steel hing pin, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nut, washers / screws etc, of brass polished, bright finished, complete all as specified and directed.

S&F in repair, 40mm dia cupboard knobs fixed with nut, washers / screws etc, of brass polished, bright finished, complete all as specified and directed.

S&F Magnet catcher suitable for kitchen cabinate/cupboard with steel plate and stainless steel as required complete all as specified and directed.

S&F mild steel frame work such as grills, gratings etc. with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings and similar work conforming to Fe-290 Grade E-165 quality complete all as specified and directed.

S&F in repair stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frame with first class hard wood bead, complete all as specified and directed.

S&F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frame with first class hard wood bead, complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified.

S&F sheet glass 4mm thick, ordinary quality glazing with oil putty or wooden bead in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F figured glass 4mm thick, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5Sqm in each pane, complete all as specified and directed.

M&L lime concrete 1:2 with 40mm graded brick aggregate as in filling in floors complete all as specified and directed..

S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), complete all as specified and directed

S&F drapery rod of stainless steel 25mm dia ribbed/fancy type includinng brackets and finals as required, fixed as in repairs, complete all as specified and directed.

S&F drapery rod of mild steel(PVC coated) 25mm dia ribbed/fancy type including brackets and finals as required, fixed as in repairs, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in cement mortar, in floors, aprons etc and removing from outside MoD land, complete all as specified and directed.

M&L for granite 20mm thick (table rubbed and polished) as in steps, window-cills, cooking platforms, counter-slabs and like, set in neat cement slurry @ 3Kg/Sqm laid over and including 15mm thick bedding layer/ backing coat in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting for counter WHB, moulding the corners/ edges and making holes for cooking gas pipe etc. complete all as specified and directed.

S&F vitreous china counter top (self rimming) wash hand basin, white in colour of size 630mmx500mm including circular cutting and tucked in granite slab including 15mmdia cast copper alloy chromium plated fancy type single lever basin mixer, 32mm dia brass CP waste fitting and connections to waste pipe and water pipe complete all as specified and directed. Make: Hindware, Model: RHAPSODY, Cat No :10045 or equivalent in Cera.

S&F 18 mm/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced) of any description and in any position and removal of debris off the premises upto a distance not exceeding 50metres and stacking of scrap iron, complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 using 20mm graded crusehd stone aggregate as in beams, chajjas, shelves, cantilevers, bressurnmers, lintels over 1.5m clear span, complete all as specified and directed. Note: Reinforcement steel bars and form work shall be measured and paid separately.

Use and waste, form work to sides & soffits of lintels, counter slabs, shelves & chajjas, etc, rough finished flat surfaces, complete all as specified and directed.

S&F in position, mild steel bars TMT, 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories

S&F 110mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with suitable size of mild steel clamp and screw, including making good mouth of rain water pipe in cement mortar 1:3 or PCC 1:2:4 complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius, complete all as specified and directed.

M&L for welding in repairs exc 2.5cm but n.exc 5cm in length and thickness of metal n.exc 6mm, complete all as specified and directed.

S&F Mild steel work as in bands, straps, supports/ stays and clamps for rain water pipes and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified.

M&L PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in floors, complete all as specified and directed.

M&L for PCC (1:2:4)type B-0, using 12.5mm graded stone aggregates, using integral water proofing compound @3% by weight of cement as in padding concrete to sunken floor Coving /gola to junction of the floor and virtical walls including chamfering on edges, complete all as specified and directed. Note:- Supply only waterproofing compound shall be measured and paid separately.

Supply only Water Proofing Compound.

M/s Bhagwati Enterprises

Baba Engineers and Contractors

jmv engineers