Special repairs to Bldg No. P-33 at New Mil Stn Kapurthala under GE Kapurthala

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement reinforced concrete of any description and in any position not otherwise specially provided complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended workcomplete all as specified and directed.

Dismentling floor hearth wall tilling incl cement mortar but not backing complete all as specified.

Material & labour for PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in benching,coping etc. including necessary form work complete all as specified and directed.

Material & labour for RCC (1:1½:3) type A-0 using 12.5mm graded crushed stone aggregate s in chajjas etc and like including 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge incl necessary scaffolding for ground floor and 1st floor as reqd. Note : Welded mesh to be paid seperately as supply only

Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per item No 8 here-in-before but except bricks complete all as specified.

Material & labour for brick work with sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

Use and waste of formwork to chajjas and similar items inlcuding edges, rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-Charge

Material & labour 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in Section-8 Clause 8.20 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Material & labour for 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm but not exc 4.00 sqm each complete all as specified and directed.

All per item No 14 here-in-before but size not exc 1.50 Sqm each complete all as specified.

Taking down shutters of any description from chowkhats or frames without taking off chowkats or frames exc 1 Sqm and not exc 2 sqm each complete all as specified and directed.

Supply & fix factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR Part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in page No 150 of SSR part-II 2004.

Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in in frame at site all as specified in SSR Part-II 2004 Section-8, clause 8B.1 to 8B.2.1 and shown on drawing in page No 146 of SSR part-II 2004.

Supply & fix 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

All as per item No 19 here-in-before but of 150 mm size complete all as specified.

Supply & fix 250 mm long mild steel sliding door bolt, plate type,stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply and fixing Butt Hinges (ISI marked) 100mm long medium weight, cold rolled mild steel with zinc chromium plating fixed/welded to frame complete as directed and specified

Supply and fixing Butt Hinges (ISI marked) 100mm long medium weight, cold rolled mild steel with zinc chromium plating fixed/welded to frame fixing in repair complete as directed and specified

Supply & fix mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

All as per item No 24 here-in-before but fixed in repairs.

Supply & fix MS 150mm size, aluminium anodized handles, cast type and fixed complete all as specified and directed.

All as per item No 26 here-in-before but 100mm size.

Supply & fix 100 mm size mild steel wire type, hasp and staple, including bolt to hinge plate and fixed with screws in repairs complete all as specified and directed.

Material & labour for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

All as per item No 29 here-in-before but fixed in repairs.

Material & labour for mild steel high yield strength TMT bars 6 to 8 mm dia cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:3:6) type C1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3.

All as per description of serial item No 32 here-in-before but comprising gauged shutters complete all as specified and directed. Note for item No 32 & 33 : (i) Glass,wiremesh,painting and grills shall be measured and paid for separately under respective items . (ii) Drg No CEJZ/TD-1019 and 1020 Sh 1/3 to 3/3 are not being uploaded and the same can be seen in this HQ on any working day.

Material & labour for non skid ceramic tiles 7 to 8mm thick, as approved, polished area of each tiles not less than 300mm X 300mm (square/ rectangular) as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed.

Material & labour for glazed ceramic coloured tiles of size 300 x 200 x 6mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Material & labour for non skid ceramic tiles 7 to 8mm thick, as approved, polished area of each tiles not less than 400mm X 400mm (square/ rectangular) as in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including screed bed 10mm thick in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material & labour for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material & labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with liquid water proofing compound complete all as specified and directed. Note : Liquid water proofing compound shall be measured and paid for separately under respective item

Material & labour for rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed

Material & labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material & labour for complete removal of exiting treatment on walls surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material & labour for preparation of new plastered surface of ceiling and applying two coats of white washing complete all as specified and directed.

Material & labour for preparation of old plastered surface of ceiling and applying two coats of white washing complete all as specified and directed.

Material & labour for applying two coats of oil bound distemper on old plastered surfaces of wall after complete removal of existing Treatment complete and making good plastered surface and rubbing with sand papers to have a uniform surface complete all as specified.

Material & labour for applying two coats of oil bound distemper over a coat of primer on new plastered surfaces of wall complete by making good new plastered surface and rubbing with sand papers to have a uniform surface complete all as specified.

Material & labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and directed.

All as per item 47 here-in-before but with 3mm thick figured glass complete

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with beads complete all as specified.

All as per item 49 here-in-before but figured glass

Material & labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material & labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of old steel surfaces of old description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 15mm bore GI tubing medium grade with and including all fittiings and cutting, threading both ends to required size, and fixed to walls, ceilings or laid under floors, making good all the disturbed portions complete all as specified and as directed.

All as per item No 55 here-in-before but 20 mm bore

M&L for taking up or down 15mm dia bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

All as per item No 57 here-in-before but 20 mm bore

Supply & fix in repairs rotational moulded polythene water storage tank triple layer, ISI Marked of capacity 500 litre cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, capacity complete all as specified and directed.

Supply & fix in repairs stop valve chromium plated (concealed) type with long shank & cup 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed. Cat part No MQT -514A ESSCO Manel series

Supply & fix 15mm bore, stop valves, cast copper alloy, stop valves, screwed down, high pressure, and with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed in repairs, complete all as specified and directed.

M&L for ball brass valves 20mm bore high pressure with polythene float and fly nuts complete, screwed for iron pipe and fixed in repairs completed all as specified and directed

Supply & fix in repairs pillar taps cast copper alloy with capstan heads, screwed down chromium plated, fancy type 15mm bore screwed down high pressure with lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply & fix in repairs vitreous china squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern) with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc making good to match with existing surfaces complete all as specified and directed.

Supply & fix in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.

Supply & fix in repairs PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and directed. Make: Prayad

Supply & fix wash hand basin, vitreous China white, flat back, size 550mm x 400mm, with a set of CI brackets 32mm bore PTMT waste fittings (minimum weight 45 grms, and PVC waste pipe 32 mm bore, including connection to water tubing with PVC connection 45cm long with PTMT check nuts, but excluding pillar tap, complete fixed in repairs all as specified and as directed by Engr-in-Charge.

M&L for appplying evenly a tack coat of hot blown industrial bitumen 85/25 at the rate of 1.2kg/sqm including cleaning surface complete all as specified.

Material & labour for PCC (1:5:10) type E-2 (using 40 mm graded aggregate) as in filling of sunken portion complete all as specified and as directed.

Dismantling of cast iron or reinforced contrecte drain pipe complete all as specified and directed.

Material & labour for cast iron soil, waste and vent pipe of bore 100mm, sand cast pipes in any length with or without ears with cement joints fixed to wall/laid in trenches complete all as specified and directed.

All as per item 72 here-in-before but 75 mm dia

Extra over 100 mm dia cast iron pipes and fittings if lead joint is provided in lieu of cement joints complete all as specified and as directed

All as per item 74 here-in-before but 75 mm dia

M&L for PTMT gratings round 140 mm size (Make: Prayag) minimum weight 50 grm) fixed in repairs, complete all as specified and directed

PTMT gratings square 150 mm size (Make: Prayag) minimum weight 100 grm) fixed in repairs, complete all as specified and directed

M&L for CI floor trap 75 mm dia outlet fixed with grating including jointing to waste pipe in run lead complete all as specified and as directed by Engr-in-Charge

M&L for CI floor trap 100 mm dia outlet fixed with grating including jointing to waste pipe in run lead complete all as specified and as directed by Engr-in-Charge

S&F 100mm Bends/Tee (any radius), diminishing pieces or tapers (larger bore measured)

S&F 75 mm Bends/Tee (any radius), diminishing pieces or tapers (larger bore measured)

M&L for cutting chases, pinning in for concealed water tubing making good to facings where required and pointing in CM 1:3 complete all as specified.

M&L for 25 mm thick PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in flooring rough finished to receive topping layer of tiles

Supply & fix in repair factory made PVC Cupboard Shutter Flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x 12mm inserted all around the hollow profile section and insert one 10mmx10mm MS tube in the centre of this section and lipped with 10mm(5mmx2) thick and 12mm wide on stiles and rails using solvent cement.the inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant printed PVC sheet using solvent cement on both the sides of the panel.The front side of the panel visible in the front of the shutter to be edge bonded using 20mmx1mm th PVC leeping on both the edges with locking arrangement of both panels etc complete as per direction of Engineer-in Charge & Manufacturers's Specifiction.

Supply & fix PVC Cupboard frame of the size 75mmx40mm with a wall thickness of 5mm made out of extruded 5mm thick Plain/Printed/Prelam PVC sheet reinforced with 15mmx15mm M.S. Square Tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2nos of 150mm long brackets of 10mm x 10mm M S square tubes.The door frame shall be fixed to the wall using 65/100mm long M S screws through the frame by using PVC fasteners. A minimum of 4 nos of screw to be provided for each vertical member and minimum of 2 nos of screws to be provided horizontal member etc complete as per direction of Enginneer in Charge & manufactrures direcction.

Supply & fix 40 mm dia cupboard knobs of brass duly polished, with nuts, screw and washer of mild steel bright finished complete all as specified.

M&L for magnetic type catch fixed with screws to door frame complete all as specified and directed by Engr-in-Charge

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) EWC coloured including fixing bolts making connection to trap & to flush pipe complete all as specified and directed.

Supply & fix coloured Plastic seat cover closed pattern with flat bottom and cover with MS CP or aluminized hinging device complete all as specified.

Supply & fix stop valve/angle valve 15mm bore, cast copper alloy chromium plated, screwed down high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for union fixed in repairs complete all as specified and directed.

Supply & fix in repairs bib taps, cast copper alloy, chromium plated with capston head, screwed down for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply & fix in repairs CP shower rose brass chromium plated square type of size 125mm with or without swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed

Supply & fix in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and as directed by Engineer-in-charge.

Supply & fix in repairs chromium plated, Brass, Jet spray including flexible pipe 15mm bore, screwed down, high-pressure pipe of 15 mm bore with wall flange fixed to wash down water closet (pedestal pattern) complete all as specified and directed.

Supply & fix in repairs steel chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.

Material & labour for 20mm thick pre polished granite stone slab laid in cooking platforms,set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, laid over 15mm thick cement screed bed or bedding layer in CM 1:4 including making nosing to exposed edges of marble stone slab complete all as specified and directed.

Supply & fix floor door stopper 150mm long aluminium alloy body and tongue, anodized with hard drawn steel spring and fixed complete all as specified.

Material & labour for mild steel rolled section of angle as in door frames with provn of hinges or arrangements for hangings etc conforming to Fe-410 W(Gde-E-250) complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer as on roof complete all as specified and directed

Demolition of mud in roofs, any thickness, including plastering and leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed

Cutting out natural vegetation plants with grown up wall or in roof and making good the damaged portion to match with the existing complete all as specified

Material & labour for 10mm thick rendering in cement mortar 1:4 on concrete surfaces and rendering is to be even and smooth with liquid water proofing compound as epr manufacturers instructions complete

M&L for preparation of new concrete surface and apply water proofing treatment to roof with APP (Atactic poly propylene) modified prebabricated five layer 3mm thick water proofing membrance super therolay of STP limited with non-woven polyster male reinforcement of 160 grms, weight of membrane @3.6kg/sqm over a solvent based bitument primer, shalitex primer @ 0.3 ltr/sqm by the same manufacturer conforming to IS-3384-1986. Apply two coats of aluminium paint on top of membrane surface after laying the membrane incl all cleaning. Note: The membrane shall be laid using butane torch. The end lap should be 100 mm and the side lap must be minimum 75 mm. The membrane shall be first laid upto the parapet wall junction and then shall be overlapped with another membrane (flushing) with and overlap covering upto a distance of 300mm. In case of parapet height is less than/upto 500 mm membrance shall be terminated at the top of parapet.

M&L for cement concrete 1:2:4 type B1 (20mm graded agg) as in padding complete all as specified

M&L for 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:6 with jointing & proofing in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed

All as per item No 105 here-in-before but except tiles

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

M&L for 110 mm PVC (SWR) bends any radius complete all as specified

Taking down any size or pattern incl all fittings of rain water pipes complete all as specified

Material & labour for 24mm dia mild steel pipe curtain rod, powder coated having wall thickness 1mm, with aluminium powder coated hooks/ brackets fixed to wall with screws, gutties @ 1500mm C/C (approx) curtain rings (minimum 5 Nos rings per running mtr of curtain rod) including taking out the existing old pelmet box along with old curtain rods and removing complete all as specified and directed.

Material & labour for 50mm thick PCC (1:3:6) type C-1 ( using 20mm graded stone aggregate as in plinth protection) complete all as specified and directed.

M&L for forming contraction joints 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified

Material & labour for mild steel framed work as in guard bars/grills, grating etc with end of bars shouldered and/ or riveted or forged in to spikes and similar works including one shop coat of zinc chromate primer complete conforming to Fe-290, Gde E-165 all as specified and directed.

Material & labour for mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material & labour for 60mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment over and including 25mm thick layer over sand cushioning complete all as specified and directed. The Interlocking Paver blocks shall be procured directly from one of the Manufacturers mentioned in Appx 'B'. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base of flooring/hard standing complete all as specified.

S&F soap dish, steel chromium plated as approved by GE complete all as specified

Supply & fix coloured toilet paper holder of CP fixed to walls with chromium plated brass screws complete all as specified. Cat Part No CAN-1153N Make: Jaguar

Supply only liquid water proofing compound complete all as specified

Roughening old surface of concrete floors by picking, sweeping cleaning and washing down with water to clean the surface and brushing the neat cement slurry with 3 kg per Sqm complete all as specified and directed.

Taking down carefully existing point wiring aluminum/ copper conductor for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated cable and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including sunken type pressed steel terminal boxes suitable for modular type accessories for the following :-

(a) One light point/fan point/bell point controlled by one, one way switch

(b) One socket outlet 3 pin, 5 Amp on independent board

(c) One socket outlet 3 pin, 5Amp on same board

(d) One light point controlled by two 2-way switches, with cables 1.5 sqmm size

M&L for point wiring with 4.00 sqmm single core multistranded copper conductor PVC insulated FRLS unsheathed cable 1100 volt grade in PVC concealed conduit medium grade of size 20mm (ISI marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with suitable for modular type accessories with 4.00 sqmm single core, multi stranded copper conductor, PVC insulated unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp complete all as specified and directed. complete all as specified.

S&F switch piano flush type single pole one way 6 amp complete all as specified

S&F switch piano flush type single pole one way 15 amp complete all as specified

S&F bell push flush type single pole one way 5 amp complete all as specified

S&F socket out let 2 in 1, 3 pin 5 Amp flush type complete all as specified

S&F socket out let 2 in 1, 3 pin 15 Amp flush type complete all as specified

S&F switch piano flush type single pole two way 6 amp complete all as specified

Supply and fix ceiling rose surface type bakelite 65 x 17.50 mm three terminal PVC / Polycarbonate isolated body complete all as specified.

M&L for bell mult music type, AC 230 Volts, single pole complete all as specified

Taking down old unserviceable flourescent tube light fitting 36/40 watt direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required the same and making good the disturbed surface complete all as specified

Supply, installation, testing and commissioning of 20 watt 4 ft long LED batten housing made of extruded aluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000K, power factor should be greater than 0.9 including LED 20W with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. Make: C&S cat part No. LTDC01220WLED/WD or equivalent makes as in Appx 'B'

Taking down u/s MCBs and Supply & fixing MCB, 10 to 32 amp, SP, 240 volt including necessary connection complete all as specified and directed.

Taking down u/s MCBs and Supply & fixing MCB, 25 to 32 amp, SPN, 240 volt including necessary connection complete all as specified and directed.

Taking down U/S sub main wiring 6/4.00 Sqmm 1100 volts grade two runs of single core PVC insulated, unsheathed copper condutor, including taking down casing capping/PVC conduit complete all as specified

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn through medium grade PVC concealed conduit of size 25 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-In-Charge Note: Two run of 6.00 Sqmm cable and one run of 6.00 earth wire & 25 mm PVC conduit shall be measured as one unit length.

Taking down old unserviceable wall mounting fitting and supply & fix in repair decorative wall mounting type with polycarbonate rings, and glass shade with lamp holders connectors block including 1 x09 watt LED bulb etc complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make : Havells cat part No. LHDLO6160099 or equivalent makes as in Appx 'B'

Taking down old unserviceable bulkhead fitting and supply & fix 6 watt LED bulkhead fitting in engineering plastic housing with clear prismatic diffuser including LED 6 Watt with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. Make : C&S cat part No. CG80IBWLED or equivalent makes as in Appx 'B'

Taking down old U/S DB and Supply & fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 20 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate. (II) PCC chamber shall be (1:3:6) type C1 using 20mm graded stone aggregate and 40mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed. (iii) Item includes the cost of 7.5 m GI pipe for protection of earth wire/strip any variation in length shall be adjusted through deviation order. (iv) Item includes the cost of 7.5 m earth lead wire/strip any variation in length shall be adjusted through deviation order.

Taking down old U/S regulator & supply & Fix electronic type fan regulator stepped type on existing phenolic laminated sheet etc. suitable for ceiling fan.

Supply, laying, testing and commisioning in replacement of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor size 25 sqmm 3.5 core

Supply, install, testing and commissioning of outdoor LT panel of size 800 mm x 600 mm x 150 mm enclosures cubical weather and vermin proof totally enclosed, made out of 3 mm thick CRCA sheet machine pressed of suitable size with provision of 4 Nos energy meter of transparent hinges type and other accessories as mentioned below to operate on 3 phase 4 wire system 415 Volts, 50HZ double door with front openable and PVC acrylic glass cover suitable size for checking of meter reading without opening door with locking arrangement incl inner shutters for mounting switch gear etc, suitable arrangement for fixing of electrical meter and SPN 40 to 63 Amp including pre wiring from Bus bar to Meter and Meter to MCB SPN (for pre wiring use 6.00 Sqmm Single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCB SPN)including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete as per drawing with masonary work for fixing in wall duly powder coated with comprising of the following :- INCOMING :- (i) MCCB 63 Amps FP, 415 Volt 16 KA adjustable thermal & fixed magnetic setting Ics = 100% = 01 No (ii) Phase indicating lamp LED type with MCBs 06 Amps – 1 Set of three. (iii) ON/OFF indicating lamp on incomer feeder for status of feeder = 02 Nos (iv) Aluminium bus bar 200 Amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc -04 Nos. OUT GOING :- (i) MCB 32 Amp,415 Volt,10 KA, Single pole and neutral -04 Nos (ii) S&F single phase electronic energy meter with LCD display of rating 5-30 amp class 1, 240V 50Hz counter type display with transparent hinge including connection from SPN to meter with 6 sqmm copper stranded conductor including earth wire complete all as specified and directed by Engr-in-charge. Make: HPL Cat part No. SPPB 1320 11OOO2OCOO or equivalent in neptune-04 Nos

Taking down old U/S GI pipe & supply and fixing 40mm dia GI tubing medium grade complete with all fittings (ISI marked) laid in trenches/fixed complete to wall and ceiling or laid in floors complete all as specified.

Excavation in trenches in in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cables, RCC/Steel tubular poles/stays and struts etc getting out including trimming sides and forming bottom surface all as specified and directed at site.

Returning filling layers including leveling watering and well ramming in layers not exc. 25cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested all as specified and directed at site.

Removing excavated surplus soil (Soft/loose) obtained from excavation to a distance n.exe 50 mtr and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

M&L for sand cushioning with a layer of sand 8 cm before laying of cable and 15 cm after laying of cable all as directed by Engr-in-Charge Note: Punned down thickness shall be measured.

M&L laying of old size sub class brick laid in trenches over the cable for protection all as specified

G M BUILDERS 36

COSMO BUILDERS

KAMAL AGGARWAL