REPAIR MAINT OF INTERNAL ELECTRIFICATION AT 7TH CAMP OFFICERS ACCN AND IMH AREA UNDER GE M AF JALAHALLI BANGALORE

Amount

Taking down carefully aluminium point wiring (light, fan, socket or power) complete and making good disturbed surfaces of walls, floors, etc. all as directed.including taking down fittings such as switches, ceiling roses, regulators, sockets,lamp holders, ceiling fittings, bulk head fittings, tube light fittings etc

Material and labour for point wiring One light point controlled by one switch one way 5 Amps with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm on surface of wall including provn of PVC box of suitable size for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed.

All as per item No 2 but for One ceiling fan point controlled by one switch one way 5 Amps

All as per item No 2 but for One exhaust fan point controlled by one switch one way 5 Amps

All as per item No 2 but for One call bell point controlled by one switch one way 5 Amps

All as per Sl Item no.2 but with One light point controlled by one ,two way switch 5 amp

All as per Sl Item no.2 but with One 2/3 pin socket outlet 5Amps on independent board

All as per Sl Item no.2 but with One 3 pin socket outlet 5 Amps on the same board with other switches

All as per item No 2 above but one switch socket combination 15 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm

Supply and fixing switch piano flush type single pole one way switch 5 Amps

Supply and fixing bell push flush type single pole one way switch 5 Amps

Supply and fixingswitch piano flush type single pole two way switch 5 Amps

Supply and fixing switch socket combination 2 in 1, 5 Amps flush type

Supply and fixingswitch socket combination multipurpose 5 A/16 Amps,5 in1,flush type.

Supply and fixingceiling rose surface bakelite 3 terminals 65x50mm all as directed.

Supply and fixingceiling fan regulator electronic socket type 100 to 180 Watt surface step type

Supply and fixingcall bell ding dong type AC 230 Volts.Make :Anchor/Havells/CG

Supply & fix Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of 20 Watt.Make : Havells. Cat No-LHEXACP7IN1W020 or equivelent WIPRO/CG/Bajaj/Philips

Supply & fix Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of 9 Watt.Make : Havells. Cat No-LHEXBLP7IN1W009 or equivelent WIPRO/CG/Bajaj/Philips

Supply and fix in repair Modular switch 1way 6A,1module

Supply and fix in repair Modular socket, 6A-2/3 pin combined 2 module

Supply and fix in repair Modular socket, 6A/16A-2/3 pin combined 2 module

Supply and fix in repair Modular fan step regulator, 120w-2module

Repairs to recessed mounting/ ceiling light fitting of any type of 9/14/20/28/36 watt including replacing all the unserviceable parts such as, choke, lamp holders all as directed. Note: (i) The unit rate quoted shall be deemed to include for replacement of worn out bolts, nuts, screws ,washers, partly wiring etc wherever required. (ii) Spares such as holder, choke, CFL,tube rod will be paid separately under respective items.

Supply only elelctronoic / copper ballast 36 w suitable for CFL/tube light fitting.Havells/Bajaj/CG

Supply only elelctronoic ballast 28 w suitable for t-5 tube light fitting.Havells/Bajaj/CG

Supply only starter suitable for 36 watt tube light fitting.Havells/Bajaj/CG

Supply only T-5 tube rod 28 watt.Havells/Bajaj/CG

Supply only tube rod 36 watt.Havells/Bajaj/CG

Supply only tube rod 14 watt.Havells/Bajaj/CG

Supply only LED tube rod 20 watt.Havells/Bajaj/CG

Supply only Modular socket 6A 2/3 pin combined 2 module

Supply only Modular socket 6A16A, 2/3 pin combined 2 module

Supply only driver for recess mounted LED Fitting 10 Watt

Supply and fixing in repair of switch piano flush type single pole one way 5 Amps complete all as specified & directed.

Supply and fixing in repair of switch socket combination 2 in 1, 3 pin 5 Amps flush type complete all as specified & directed.

Supply and fixing in repair of Switch socket combination multipurpose 5/16 Amps, 5 in 1, 4 / 5 hole flush type complete all as specified & directed.

Supply and fixing in repair stepped type electronic fan regulator flush type,socket/Switch Type on the existing phenolic laminated sheet etc

Supply and fixing in repair bake lite sheet 2 mm thick cuting of required size fixing on existing board.

Supply and fixing in repair Lamp holder angle type made of PVC/Polycarbonate with back plate.

Supply and fixing call bell ding dong type AC 230 Volts.Make :Anchor/Havells/CG

Supply and fixing in repair LED Lamp 7 watt. Make :Cat Part No LHLDEUEEML8R007 of Havells or equivelent WIPRO /CG/ Bajaj /Philips

Supply and fixing in repair LED Lamp 9 watt. Make :Cat Part No LHLDEUEEMC8R009 of Havells or equivelent WIPRO /CG/ Bajaj /Philips

Supply & fix in repair decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of 20 Watt.Make : Havells. Cat No-LHEXACP7IN1W020 or equivelent WIPRO/CG/Bajaj/Philips

Supply & fix in repair decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of 9 Watt.Make : Havells. Cat No-LHEXBLP7IN1W009 or equivelent WIPRO/CG/Bajaj/Philips

Supply & fix in repair Recess mounted downlighter 10 watt with pressure die-cast aluminium heat sink & PC diffuser in white powder

Supply and fix in repairs of 15 watts, 230 V LED light fitting for Building security LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK07.. Make : Havells Cat Part No. ENDURAPEARLSL 15WLED757 SASYTOPC or equivalent make of Philips/OSRM/KRIPA.

Supply and fixing in repair of MCCB 125 amps 4 pole 16 KA 415 volt complete including taking down all as specified & directed.

Supply and fixing in repair of MCCB 100 amps 4 Pole 16KA 415 volt complete all as specified & directed.

Supply and fixing in replacement of MCCB 63 amps 3 Poles 16KA 415 Volts. volt complete all as specified & directed.

Supply and fixing in repair, sheet metal enclosure distribution box suitable for MCB'S 4 way TPN 415 volts with 200 Amps rated bus bar double door complete including connecting up all as specified and making good distrubed surface

All as per item No.51 above but 8 way SPN with 200 Amps rated bus bar , 240 volts

All as per item No 51 above but 4 way SPN with 200 Amps rated bus bar , 240 volts

Supply and fixing in repair MCB Single pole, 240 volts 5 to 32 Amps 10 KA rupturing capacity, C series

Supply and fixing in repair MCB Single pole & neutral 240volts 5 to 32 Amps, 10KA rupturing capacity, C series

Supply and fixingMCB triple pole 415 volts 40 to 63 Amps 10KA rupturing capacity, C series.

Taking down sub main wiring of any size complete all as specified and directed.

Material and labour for sub main wiring with two single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 4 sq mm drawn through suitable size of non-metallic PVC rigid conduit with 4 sqmm copper conductor cable as earth conductor of 4.0 sq mm and conduit accessories fixed up in surface including connecting up complete all as specified and directed.

All as per item no 58 but cable size of 6.0 sqmm

Material and labour for sub main wiring with Four single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 6 sq mm drawn through suitable size of non-metallic PVC rigid conduit with 6 sqmm copper conductor cable as earth conductor and conduit accessories fixed up in surface including connecting up complete all as specified and directed. Note for item No 58 to 61 :-Two/Four run of cable and one run of earth continuity copper conductor and non metalic PVC conduit shall be measured as one unit length.

All as per item no 60 but cable size of 10.0 sqmm

Material and labour for replacing junction box/check box with plastic cover on roof/wall all as directed

Taking down ceiling fan of any size type and make after disconnecting the electrical connections ,cleaning, servicing , greasing removing and replacing all the unserviceable spare ,painting with two coats of synthetic enamel paint by means of suitable spray gun after cleaning and prepairing the suface including writing the MES No. ,fixing the same back to the original location all as directed. Note : (i) All the replaced spare for unserviceable spares will be measured and paid separately (ii) The rate quoted shall be deemed to include the cost of painting and minor spares such as split pin , screws washers etc.

Taking down Exhaust fan of any size type and make after disconnecting the electrical connections ,cleaning, servicing , greasing removing and replacing all the unserviceable spare ,painting with two coats of synthetic enamel paint by means of suitable spray gun after cleaning and prepairing the suface including writing the MES No. ,fixing the same back to the original location all as directed. Note : (i) All the replaced spare for unserviceable spares will be measured and paid separately (ii) The rate quoted shall be deemed to include the cost of painting and minor spares such as split pin , screws washers etc.

Supply only ball bearing suitable for ceiling fans 1200 / 1400/ 1500 mm dia sweep.

Supply only ball bearing suitable for exhaust fans 300/450/600 mm dia sweep.

Supply only Capacitor 2.5 mfd for ceiling fans.

Supply only Capacitor 4 mfd for exhaust fans.

Supply only gun metal bush suitable for ceiling fans of 1200/1400/1500 mm sweep.

Supply only twin core flexible wire 1 Sqmm for connecting up ceiling fans, exhaust fans/wall mounting fan etc.

Supply only the mounting clamps and rubber bush with nut, bolt, washers, locking clip etc complete suitable for fixing at the down rod suitable for fixing the ceiling fan.

Supply and fix GI pipe down rod made out of 15 mm dia GI pipe suitably cut into service including necessary threading / cutting for necessary suitable modifications according to the requirement to fix downrod complete all as specified & directed.

Taking down old burnt out copper winding wire from ceiling fan of 1200/ 1400 mm sweep and rewinding by using suitable gauge of copper wire insulating and varnishing,heating, cleaning, servicing,greasing,refixing at site,testing for smooth functioning complete all as specified & directed.

Taking down old burnt out copper winding wire from exhaust fan of any sweep and rewinding by using the same gauge of copper wire super enameled including heating and varnishing,cleaning, servicing,greasing ,refixing at siteand testing for smooth functioning complete all as specified & directed.

Supply and fix Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete.

Supply and fix Modular switch 2 way 6A, 1 module type, 230 volts, ISI marked complete.

Supply and fix Modular Bell push 6A 1 module type, 230 volts, ISI marked complete.

Supply only modular white cover plate with frame, 2 module ISI marked complete all as specified and as directed.

Supply only White cover plate with frame, 4 module ISI marked complete all as specified and as directed.

Supply and fix White cover plate with frame, 6 module ISI marked complete all as specified and as directed.

Supply only White cover plate with frame, 8 module ISI marked complete all as specified and as directed.

Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers connected to and including GI earth wire 4.0 mm dia upto 7.5 mtr by means of bolts, nuts, check nuts and washers, and protected by light grade 20 mm dia and connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with P C C 1:2:4 Type C2 (including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 metre and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

Supply and fixingin replacement earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.

Supply and fixingin repair for 20 mm bore galvanised steel water tubing medium grade with all fitting laid in trenches complete all as specified.

Vasavi Electricals

shashi shekar construction

s k enterprises