REPAIR/MAINT TO CHAIN LINK FENCING, SECURITY WALL AND MISC B/R ITEMS AT EME WORKSHOP MORH AND ADJOINING AREA UNDER AGE B/R-II OF GE (N) UDHAMPUR

Amount

Excavating in post holes (or similar holes) each, not exceeding 0.50 Cum and getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete etc., complete all as specified and directed.

M&L for mild steel work as joist, channel, angle, or tee sections, fixed independently without connecting plates etc. (cut to ordinary lengths i.e. within 20mm of the length indicated, conforming to Fe-290, Gde E-165, complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type, to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and directed.

Holes drilled upto 12mm dia (and countersunk, if required) depth of holes exc 3mm but not exc 12mm, complete all as specified and directed.

M&L for mild steel screw bolts (machine made) 5 to 10mm neck with hexagonal or square heads at one end and sS&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long and 5-10mm dia of neck, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position, complete all as specified and directed.

Fixing only mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. and similar work, complete all as specified and directed.

M&L for mild steel angle iron/ flat iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc. and similar work, conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.

S&F in replacement galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc., complete all as specified and directed.

S&F in replacement concertina coil, punched type (including spike and handle) with 50/51 turns and dia 600mm, having a 2.6mm dia core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electrogalvanized to provide protection against outdoor exposure. The punched tape is mechanically crimped over the cover wire and then formed into a coil at various parts of the periphery of the coil steel clips connect the individual turns of the coil to each other so that it opens up like an accordion. The weight of each coil will be 9 KG (+/- 5%) without packing material and coil length 7 to 8 mtr when opened up. Each coil wound with bituminized Hession cloth for providing protective coating, complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 30cm long and 12-20mm dia of neck, complete all as specified and directed.

S&F in replacement chain link MS galvanised fencing of size 50mm x 50mm and any type (As per site requirement), complete all as specified and directed.

Taking down cement plaster on brick walls, stone masonry, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be deemed to include in the quoted rates.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping, kneelers, bed blocks etc. including necessary from work, complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of cement base paint over and including a coat of alkali resistant primer, complete all as specified and directed.

M&L for waling of random rubble stone masonry, built in cement motar 1:6, uncoursed, well bounded, bedded and solidly hearted, complete all as specified and directed.

All as per Srl item No. 21.00 here-in-above but except stones.

M&L for raised pointing to RR masonry in CM 1:4, complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, finished the surface even and smooth without using extra cement, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:2:4, type B-1 (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5 mtr clear span, complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:2:4, type B-1 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like, complete all as specified and directed.

Formwork to rough finished concrete surfaces and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

Formwork to rough finished edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and directed.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F TMT Mild steel bars 6-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortor including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for half brick work with sub Class 'B' bricks, old size, straight or curved on plan, built in CM 1:4, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, build in CM 1.4, complete all as specified and directed.

All as per Srl item No. 34.00 here-in-above but except bricks.

takashdeep traders

KUMAR CONSTRUCTION CO

M/S GURU DEV BUILDERS

RAMAN CONSTRUCTION CO

paras ram pachiala

jyoti parkash sharma

sohtra and co

M/s ARJUN SINGH

M/S BHARAT LIGHT ELECRIC.CO

JOGINDER SINGH

SINGH CONST CO

S K BROTHERS