Raising of platform upto High level at NSG-6 stations.(MPG & BMY) both PF no.2 under ADEN/L/IZN.

Item Breakup - A-CPWD DSR-2021.

Item Breakup - B-CPWD DSR-2021.(Reinforcement)

Item Breakup - C-NS items.

Providing hand packed dry flat brick Sqm flooring, class designation 7.5 (FPS Bricks), excluding pointing with joints filled with sand over a bed of dry sand (ordinary)of average thickness 25 mm including ramming sub grade :Flat brick.

Providing and fixing of plain formed flashing Metre at ridges / cover / corner / barge pieces / apex junctions of roofing and cladding made of polyester colour GI sheets 0.52 mm thick in required shape colour, duly fixed with stitching screws (with EPDM washers etc. as per site requirement Upto 600 mm width (girth)

Providing and fixing permanently colour Sqm coated trapezoidal profiled sheet of depth 28-30mm at 195-205mm pitch distance with precisely engineered "Rib & Flute" design. Profiled sheets shall be min. 0.5mm TCT/0.45mm BMT high tensile zinc aluminium alloy coated zincalume / galvalume steel sheet (550 mpa yield strength) having a coating of mass of 150 gsm zinc-aluminium coating AZ-150 total on both sides as per, AS 1397:1993 finished with 20 microns approved colour coating of Silicon Modified Polyester (SMP) / Super Polyester paint coat on exposed surface over a primer coat of 5 microns and a back coat of 5 microns on reverse side over a 5 microns primer coat. There shall be 2 small ribs/square flutes between profiles for providing additional strength. The sheet to be fixed over the purlins with hexagonal head self drilling suitable fasteners with neoprene / EPDM washer on crests of the sheet.

Manufacturing, supplying & fixing of pr- Each fabricated RCC coping stone of size 760mm x 900mm x150mm thick as per top face designed and approved by site Engineer with M-30 grade RCC as per NER drawings (N.E.R.H.Q.E Plan no-GML1-2022/T-908010) manufactured by vibro compaction process using jointless FRP/GRP steel moulds of required size, shape & design. The item includes cost of cement, reinforcement, transportation etc. complete job.

Providing, hoisting and fixing in position cum upto floor two level M20/M25/M30/M35 Grade precast RCC work including setting in cement mortar 1:3 (1 cement: 3 coarse sand) and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete including cost of centering, shuttering, finishing, Admixtures in recommended proportion (as per IS:9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability, excluding cost of cement and steel reinforcement, as per approved plan and direction of engineer incharge, in block of complicated design Such as C blocks of cabins, Platform wall, RCC drain etc IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Supplying, erecting and fixing precast Each concrete reinforced bench with back rest. Bench shall consist of 2 nos.L shaped base support in natural cement colour of thickness 100 mm,back height 1000 mm, front height 450mm, base width 620 mm and 5 nos.reinforced concrete planks in red colourand size of 1500 x 100 x 50mm and 1no, reinforced concrete plank of 150 x200 x 50mm; manufactured by usingM-30 grade concrete & reinforced suitably; all parts to be joined with galvanised nuts and bolts of suitable size. All bolts to be sealed after assembly. Complete job to be done asper directions of Engineer Incharge.

Carring out soil investigation at site for Job bearing capacity and other parameters for designing the foundation for the satisfaction of engineer in charge at the required depth as per the direction of engineer incharge. The quoted rates will including the cost of submitting the soil test report from the agency of reputed as approved by the site engineer incharge (with contractors own tools and eqipment if required) as per special conditon of contract. The method of testing will be as per the direction of site Engineer

Providing ,supplying and installation of Each stainless steel water booth (confirming to SS-304 grade with atinfinish), consisting of 1350x1350x1.6mm thick box section , 1.6mm thickc ladding sheet, 1mm thick sink with 10mm thick base plate fixed with anchor fastener. Complete in all respects as per direction engineer in charge.

Design of Foundations of PP Shelter for Each RDSO's standard drawings. The desgin and drawing shall be submitted in soft and hard copies duly collecting necessary data from Railways authorities, submitting for Railway's verification and approval, making corrections duly incorporating suggestions in drawings/ designs, further submission of original in transparent film paper and soft copy for Railways approval etc.with contractor's technical expertise and instruments, labour, consumables, repeatedly attending till final approval etc., complete as directed by Engineer in- charge. Total 8095140.50