Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹30.0 L+₹2.5 L (9.18%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹30.9 L+₹3.4 L (12.4%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹33.8 L+₹6.3 L (23.1%)Rejected-Finance 00 KAMALWAGANJA ROAD NEAR HANUMAN MANDIR HARINAGAR SHIV PURAM PHASE 1 HALDWANI NAINITAL UTTARAKHAND 263139 | NAINITAL | UTTARAKHAND | 263139 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹34.2 L+₹6.7 L (24.3%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹45.8 L
EMD Value
₹95,500
Closing Date
11 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAGROTA
GE NAGROTA
SPL REPAIR TO BLDG NO PN 394 OTM ACCN OF 651 EPU AT NAGROTA MIL STN
2023_MES_619039_1
GEN-8572/E8
Open Tender
Civil Works
Item Rate
180 days
NAGROTA
Class D
Category a i
8 documents required · 8 mandatory
₹500
GE NAGROTA
₹95,500
Yes
17 Feb 2024
15 Sept 2023
18 Oct 2023
15 Sept 2023
11 Oct 2023
29 Sept 2023
Amount
SCHEDULE ‘A’ PART-I ( LIST OF B/R WORKS ) Taking down chowkhets or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each . complete all as specified and directed
Taking down chowkats with shutter n. exc 1.5 sqm each. (without taking of shutter from the frame) complete all as specified and directed.
S&F pressed steel frame of size 105 x 60mm for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete all as specified and directed
S&F pressed steel frame of size 125 x 60mm for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete all as specified and directed
S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets. complete all as specified and directed
S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc complete all as specified and directed
S & F Box type Steel windows/vent with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed
S & F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and as directed.
S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.(Make Rajshri Plastiwood limited or Sintex)
S & F factory made solid panel PVC door shutter with wood free EPS 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.(Make Rajshri Plastiwood limited or Sintex) complete all as specified and directed
S&F Steel ventilators with top hung shutter including hinges,steel pegstay complete all as specified and directed
3mm thick sheet glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc complete all as specified and directed
3mm thick pin head glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc complete all as specified and directed
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed
S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed. complete all as specified and directed
S&F 100mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.
S&F 75mm mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.
S&F 150mm long aluminium handles cast type, anodised and fitted complete all as specified and directed.
S&F 100mm long aluminium handles cast type, anodised and fitted complete all as specified and directed.
S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete all as specified and directed
M&L two coats of synathetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10 cms width or girth incl preparation of surfaces. complete all as specified and directed
S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc complete all as specified and directed
Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
Brick work with sub-class `B' bricks, straight or curved on plan with modular bricks exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed
Taking down cement plaster on brick or stone walls, etc .including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed
M&L rendering 5mm thick in cm (1:3)as in ceiling , soffit of chajja etc. complete all as specified and directed
M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash complete all as specified and directed
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified and directed
M&L for rendering 15mm thick on unfair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and directed
M & L Preparing new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed
M & L Preparing new plastered surfaces of wall and applying two coats of oil bound distemper over 3mm thick wall care puttyover a coat of chalk whitening preparatory to distempering on walls etc complete all as specified and directed
M & L Preparing old plastered surfaces of wall and applying one coat of cement based paint complete all as specified and directed
M & L Preparing old plastered surfaces of wall and applying one coat of oil bound distemper etc complete all as specified and directed
M & L Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying one coat of white wash on walls after filling any hole with putty complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed
Demolition of unreinforced cement concrete of any description and in any position complete all as specified and directed.
M & L PCC 1:3:6 type C2 (75 mm thick as in plinth protection & finishing the surface even & fair W/o using extra cement complete all as specified and directed.
M&L of 25 mm thick PCC 1:2:4 type B-0 as a sub base to receive topping layer finished even and rough complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L for machine cut kota stone 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and mixed with pigment to match the shade of the slab includingrubbing and polishing complete all as specified and directed
M&L for non-skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm , in floors etc . Set and jointed in neat cement slurry and pointed in while or coloured cement to match etc complete all as specified and directed
M&L glazed, coloured, ceramic, tiles of size (450mm x 350 mm) x 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.
M/L Cement concrete in ,sub base flooring, filling and mass concrete typeE2, 1:5:10 (using 40 mm graded granite stone aggregate) complete all as specified and directed
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, M-40 Grade etc complete all as specified and directed
M & L Chequered cement concrete tiles of size 20cm x 20cm x 25mm thick (with grey cement and pigments) set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:6,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding complete all as specified and directed
M&L for 20mm thick screed bed or bedding in CM 1:4 layer of mortar for laying of floor finishes etc complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 1:6 15mm thick for laying floor finishes etc complete all as specified and directed
M&L for 10mm thick rendering in cement moratr 1:4 as in backing coat for skirting/dados etc complete all as specified and directed
S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, excluding flushing cistern & flush pipe complete all as specified and directed
S&F vitreous china squatting pan Orrisa pattern 580x440mm white with integral foot rest (excluding flushing cistern) fixed in repairs complete all as specified and directed
S&F in repairs, self cleaning water jet, chromium plated, (HEALTH FAUSET)15 mm bore with all accessories complete suitable for EWC as approved. complete all as specified and directed
S& F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe.complete all as specified and directed
S&F in repair vitreous china wash basin agle back, size 600x480 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed
Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed
S&F in the wall soap dish, vitrious china white, approximate size 160x160x90 in repairs complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and directed.
S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.
M & L for Cutting chases, pinning in, making good to facing where rerquired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and directed
Taking up or down 20mm bore steel tubing and connections,including cleaning for refixing or removal to store.complete all as specified and directed
S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.
S & F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipecomplete all as specified and directed
S & F in repair 15mm bore Bib taps, chromium plated fancy type with crutch or butterfly handle, screwed down screwed for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15mm bore Stop valve fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed bath ends for iron pipe or fixed union and fixed complete all as specified and directed.
S&F in repairs gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
S&F in repair Glass corner Shelf of 300mm long complete all as specified and directed
M&L for 75mm dia cast iron Nahani Trap, with grating including jointing to waste pipe fixed in concrete type B1(1:2:4)
M&L for PVC SWR gully trap 125/110mm, setting and jointing with solvent cement with grating including jointing to waste pipe fixed in concrete type B1(1:2:4) complete all as specified and directed
Grating doom round 140mm size of PTMT (minimum weight 50gms) complete all as specified and directed
Taking down AC pipe in any type laid in trenches, floor or fixed wall etc including accessories complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of bore 75mm complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of bore 110mm complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of bore 75 mm complete all as specified and directed.
S&F PVC (SWR) vent cowl bore 75 mm complete all as specified and directed.
S&F PVC (SWR) 75 mm bore bends (any radius) fixed with cement joint complete all as specified and directed.
S&F PVC (SWR) 110 mm bore bends (any radius) fixed with cement joint complete all as specified and directed.
S&F 110 x 75mm bore PVC (SWR) reducer fixed to walls with cement joint complete all as specified and directed.
S&F PVC (SWR) 110 mm bore branch piece (Tee) fixed to walls with cement joint with or w/o ovel access door complete all as specified and directed.
S&F 110mm dia PVC pipe single socketed in any length with rubber ring joints, fixed to walll and in trenches or in floors, fixed in repairs.complete all as specified and directed
S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm bore complete all as specified and directed
S&F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flange complete all as specified and directed
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed
S&F Precast RCC (1:2:4) type b-1 (using 20mm graded crushed stone aggregates) as in manhole covers including necessary formwork required including setting in cement mortar (1:4), complete, all as secified and as directed.
Mild steel bars 6mm dia and over, cut to length, bent to shape required including cracking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips TMT bars.complete all as specified and directed
Dismantling of water tanks and removing to store of capacity exc 250 Ltr & N exc 500 ltr complete all as specified and directed
S&F 500 ltr capacity Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed
S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule.complete all as specified and as directed.
Dismantling wrought iron or mild steel works of any description not otherwise provided for.complete all as specified and directed
Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and as directed.
Preparing new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed.
M&L preparation of new steel and iron surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.
Preparing old steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.complete all as specified and as directed.
M&L Providing, cement concrete 1:2:4 type B-0 (12.5mm graded aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges or as in padding concrete complete all as specified and as directed.
M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be mesured and Paid for Separately.
Supply only for Integral water proofing compound.complete all as specified and as directed.
M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfacescomplete all as specified and as directed.
M&L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm.complete all as specified and directed
M&L One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.
M&L Applying one coat of aluminium paint on top of APP membrane.complete all as specified and as directed.
M&L Cement concrete tiles 25cm x 25cm x 22mm thick, with grey cement and no pigment m a c h i n e pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished including 15mm screed bed in 1:6 CM complete all as specified and as directed.
Removing old tarfelt or polythene film including taking down plaster of sunken floor , roughening and cleaning by brushing with wire brush to remove all dirt and apply a coat of cement slurry with 3.00 Kg of cement per sqm and Rendering 15mm thick in CM 1:3 using WPC finished rough (sunken floor/wall) and then applying two course treatment as follow :-(i) Applying bitumen primer @ 0.40Kg/Sqm (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3 Kg/Sqm with 100 GSM/Sqm non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap. The membrane has to be laid with LPG torch and over lap sealed and finished neat. complete all as specified and as directed.
Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe complete all as specified and as directed.
M & L for 62 cm wide Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match complete all as specified and as directed.
Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit complete all as specified and as directed.
Taking down ceiling fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete all as specified and as directed.
M&L for Point wiring using FRLSH PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including PVC conduit medium grade ISI marked not less than 20 mm dia concealed in wall and surface on ceiling with all conduit fittings etc terminated in and incl concealed pressed steel sunken box readily available ( having wall thickness not less than 1.22 mm upto 200 x 300 mm box size & having wall thickness not less than 1.63 mm beyond 200 x 300 mm ) duly covered with 3 mm thick bakelite sheet cover for fixing switches , sockets , fan regulators etc incl testing and making good to disturbed surface to match existing surface for one light/fan/bell point complete all as specified and directed.
All As per Srl item N0 111 above but for one socket out let 5 Amp controlled by one switch on same board with other switch .
All As per Srl item N0 111 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .
All as per item No 111 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board complete all as specified and directed.
S&F switch piano flush type 5 Amps single pole one way complete all as specified and directed
S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.
S&F switch socket combination 2 in 1 , 5 pin 5 /15 Amps flush type complete all as specified and directed.
S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.
Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and as directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings including 7 Watt LED bulb complete all as specified and directed.
S&F decorative wall mounted luminaire with & including 9 Watt LED lamp complete as per Cat No of LHFHCHE1TL1W020 of Havells or equivalent in approved make complete as specified and directed.
Supply & fixing heavy duty Metal body Exhaust fan 300 mm sweep single phase AC 230/240V complete with louvers. complete all as specified and directed.
S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.complete all as specified and directed.
S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete all as specified and directed.
S&F MCB single pole 5 to 32 Amps 10 KA 240 volts "C" series complete all as specified and directed.
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link Vertical TPN 4 way suitable for MCCBas incomer, 100 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar including 100 A MCCB as incomer 16 KA complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site incl taking out of exsing UNSV DB with MCBs.complete all as specified and directed. (Note: MCCB 100 Amp 4 pole should be measured and paid seperately)
S&F MCCB 100A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete all as specified and as directed.
M&L in replacement of sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sq mm as earth continuity conductor connected to commen earth and earth dolly complete all as specified and directed.
S&F building security light luminaries eenergy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete all as specified and directed.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm bore medium grade for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified and directed.
R.K. Works
U K Engineering Works
M/S K K ENTERPRISES
RAJINDRA ENGINEERS & CONTRACTORS
M/S ROMESH KUMAR SHAN
M/S CJ CONSTRUCTIONS
SUNIL AND CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .