ADDN ALTN TO MOTIVATION CUM LECTURE HALL AT FIRST FLOOR OF BLDG NO P-364 (SAMPOORNA BLDG) AT BV YARD, PROVN OF DEHUMIDIFIER, AIR CONDITIONER, ELECTRICAL WORK AND BASE FOR 02 CONDITIONER AT NCN SDC, NTS TEYLERABAD, PROVN OF TWO 02 TON AC IN NEW OFFICE

Amount

Demoliton of cement concrete including tiles and mortar of any description and in any position not otherwise specifically provided for

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in sub base for flooring/levelling coarse etc complete all as specified and as directed

M & L for Double Charge/Ultra Charge Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.30 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for ceramic tiles edge to edge joint 7 to 8 mm thick area of each tiles exc 0.11 Sqm but n exc 0.18 sqm on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match with floor tiles including 10 mm thick backing plaster in CM (1:4) as specified and directed

M&L for Glazed Ceramic tiles 450x300x 8-10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) all as specified and directed

M&L Granite (of any type) 18 to 20 mm thick machine cut fixed on slab, window cill etc, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting, moulding & polishing over and including 20 mm thick screed in CM (1:4) all as directed by Engr in charge

M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed by Engr in Charge.

Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, Cl 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for complete removal and applying one coat of white cementitious putty on wall and making the surfaces smooth by rubbing with sand paper to achieve finished surface complete all as specified and as directed.

M&L preparing newly plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior plastic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apcolite Advanced Shyne), Berger (Easy Clean), Nerolac (Pearl), Shalimar (Superla Stay Clean)

M&L preparing old putty/plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior plastic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apcolite Advanced Shyne), Berger (Easy Clean), Nerolac (Pearl), Shalimar (Superla Stay Clean)

Dismantling of ceiling boarding in description fixed in any position with nails complete all as specified and as directed.

S & F in repairs anodized aluminium grid work 605 x 605 mm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof by means of ceilling cleats made out of G.l. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified & directed all as specified & directed

M&L 4mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber/GI/Aluminium framework with screws.

Supply and fix in repairs for 12mm thick toughened glass with etching fixed with necessary Ozone path touch fittings as in openable door including chamfered edge polishing etc complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame).

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S& F only 4.8 mm Plain sheet glass ordinary quality, in square exc 0.5 sqm each.

S & F only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1 40mm and fixed with aluminium wire staples including taking down all as specified

5 & F only Figured glass 4 mm, pin head type and glazing with oil putty in squares n exe 0.5 sam Sqm in each pane.

Taking down carefully existing aluminium point wiring (light, fan, socket or power) complete fittings fixture such as switches Ceiling roses, pendents, regulators, sockets etc to be measured separately)unscrewing from Board/outlet boxes, fittings & fixtures such as switches, sockets, ceiling rose lamp holder tube/ceiling fitting, bulk head fittings, tube lights & regulator etc and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

Taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified

Taking down unserviceable main switches ,DBs and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified

M&L for point wiring with two run of PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm (FRLSH), PVC conduit medium grade/PVC casing caping and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc) made of not less than 1mm thick and 6cm depth covered GI metal flush box and drawing one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor cable (FRLSH) as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and directed by Engr-in-Charge. (In ceiling Portion surface conduit wiring shall be carried out.) Note: The quoted rate inclusive for the following : - (a) Modular cover plate with frame of any module complete. (b) Proper colour coding is to be followed as per IS Specification. (c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.

One light point controlled by one one way switch

One ceiling fan point controlled by one switch.

One 3 pin socket outlet 5 Amps on the same board with other switches

One 3 pin socket outlet 5 Amps independent

All as per sri item No 29.00 above here-in-before but for 15/16 Amps socket out let independent with 4 sqmm copper conductor complete.

Suppy & fixing modular switch one way, 6 Amps, 1 module, 240 volts complete all as specified and as directed.

Supply & fixing modular switch one way, 16 Amps, 1 module, 240 volts complete all as specified and as directed.

Supply & fixing modular socket, 2/3 pin, 6 amps, 2 module complete all as specified and as directed

Supply & fixing modular socket, 2/3 pin, 6/16 amps, 2 module complete all as specified and as directed

Supply & fixing ceiling Rose, 3 terminal polycarbonate isolated body complete all as specified and as directed.

M&L for submain wiring with PVC insulated unsheathed multi-stranded copper conductor cable four run of 10 Sqmm single core (FRLSH) 1100 volts grade drawn through in and including concealed with PVC conduit medium grade of suitable size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification and two run of 10 Sqmm PVC insulated copper conductor(FRLSH) for earth continuity wire complete all as specified and as directed. Note : (i) Six run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length.

M & L for submain wiring with two single core PVC insulated unsheathed multistranded copper conductor cable of size 6 sqmm (FRLSH) and one single core PVC insulated unsheathed multistranded copper conductor cable green colour of size 6 Sqmm (FRLSH) as earth lead in and including concealed/fixed on wall & Ceiling with PVC conduit medium grade of suitable size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification including takind down unserviceable submain wiring complete all as specified and as directed Note: (i) Three run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length.

All as per item No 37.00 here-in-before but with 4.0 sqmm cable complete all as specified and as directed Note for item No 36.00 to 38.00: The quoted rate inclusive for the following : - (a) Proper colour coding is to be followed as per IS Specification. (b) Test certificates of cables to be submitted before commencement of work/ claiming for payment.(c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping of suitable size as per site requirement.

Supply & fixing LED luminaire 600mm X 600mm, 36 watt, 220V AC, 100 Im/watt, 6500K, IP 20, recessed type with high efficiency PMMA diffuser soft glare free light complere with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed

Supply & fixing ceiling fan 1200mm sweep with blades, suitable BLDC remote controlled electronic regulator as per OEM design, down rods and connected accessories, 230 V, 1200 mm sweep. Min air delivery 210 CrM, 5 star rated, equipped with brushless direct current motor (BLDC) of wattage ≤ 28W including provision of cable from ceiling rose/connector to fan including taking down old unserviceable ceiling fan and deposited to MES store yard complete all as specified and as directed.

M&L for taking down exhaust fan of size 380 to 450mm, metal body, AC, single phase, 230V from the existing place and fixing of exhaust fan at a place where as directed with louvers and suitable size of buzzer bolt/hold fastner including making hole to the wall surface of any type/girth and at any height for fixing of exhaust fan including making good disturbed surface with existing wall colour and provision of cable from ceiling rose/connector to fan complete all as specified and as directed.

Supply & fixing Single pole and neutral enclosure with a two pin and earth plug and socket suitable for RCBO 2 pole, 20 to 40 amps rated complete all as specified and as directed. Note : RCBO will be measured and paid separately

Supply and fixing MCCB DB VTPN 4 way IP-54, IK-09 made of sheet steel phos phatised, powder painted with bus bar 200A, neutral link, earth bar and Din rail 415 Volts with double door, suitable for MCCB 4 Pole 100-160 Amps as incomer and MCB Single Pole as outgoing complete all as specified and as directed.

Supply & fixing in replacement sheet metal enclosure with TPN MCB DB's 4 way (grouted in walls) double door type IP-54, IK-09 Protection. Isolated Neutral, Door earthing, cement spill protector complete including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and as directed.

Supply & fixing MCB DB's SPN 8 way, IP-54, IK-09 double door, sheet metal enclosure, 240V, 100 amps rated busbar including suitable size of copper ferrules for fixing of cable complete all as specified and as directed Note for item si No 18 to 20 : (i) MCCB and MCB will measured and paid separately (i) Cost for concealed the DBs on wall including making good disturbed surfaces with existing colour shall be deemed to be included in the quoted rate.

Supply & fixing MCCB 100-160 Amps, thermal adjustable, 25 KA, ICS = 100% ICU, AC 415 Volts, four pole including providing aluminium lugs for incoming and out going cables complete all as specified and as directed

Supply & fixing MCB TPN C curve, 415 volts, 40 to 100 amps, with rupturing capacity 10 KA, including providing copper lugs for incoming and out going cables complete all as specified and as directed

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) TP 32 to 63 AMP and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed.

S&F RCBO 32-40 Amps, double pole 240V AC type. 30 mA complete all specified and as directed

S&F MCB single pole 240 volt, 6 to 32 Amps with rupturing capacity 10KA, including providing copper lugs for incoming and outgoing cables complete all as specified and as directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built filter for better indoor air quality with minimum 5 star rating of capacity 1.5 TR complete in container at NTS and any other indicated locations all as specified and as directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit for minimum 5 star rating of capacity 2.0 TR complete all as specified and as directed.

Supply, install, testing and commissioning of direct expansion 1:1 type air conditioners comprises of indoor unit and out door unit. indoor unit comprises of low noise fan motor, indoor cooling coil, fan and outdoor unit shall comprises of outer condenser coil, fan motor, blade assembly and compressor all in complete tower AC, indoor/outdoor complete with cordless remote control unit, twin rotary compressor or as per OEM design, suitable for operation on 3 Phase, 415 V, 50HZ, AC supply of capacity 3.8 to 4.0 TR complete all as specified and as directed. Note for item No 51.00 to 53.00: (a) The cost of remote with batteries, compressor oil, tools & plants for fixing of outdoor unit at any height and making good disturbed surfaces is deemed to be included in the quoted rate. (b) Drilling of the wall should be done by core cutting machine. (c) Quoted rate inclusive of copper piping upto 3 mtr and refrigerant gas upto 3 mtr piping. (d) Addtional cost of copper tubing (>3 mtr), refrigerant gas (>3 mtr) & bracket for mounting outdoor unit will be measured and paid separately. (e) Quoted rate inclusive of necessary angle iron support fixing indoor unit to inside wall of container all as per site requirement including making hole/making good for drawing out refrigerant piping from indoor to outdoor.

S&F Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 415V, 32 Amp complete all as specified and as directed.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amps complete all as specified.

M&L for air conditioner mounting bracket heavy duty GI steel/MS powder coating finish inclusive of nuts and bolts for mounting the bracket on wall complete all as specified and as directed.

S&F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of 2.5% and capacity 3KVA complete all as specified and as directed.

Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + 2.5% and of capacity 5.0 KVA complete all as specified and as directed.

S&F rigid non-metallic PVC conduit heavy duty 25mm dia inclusive of all fittings and fixing accessories complete all as specified and as directed.

Supply and charging environmental friendly refrigerant Gas or any other as per OEM recommendations

Supply and fixing of copper tubing of size "1/2" flare size conforming to relevant IS with foam insulation & warpping tape including required copper brazing work complete all as specified and as directed.

Supply and fixing of copper tubing of size "3/8" flare size conforming to relevant IS with foam insulation & warpping tape including required copper brazing work complete all as specified and as directed.

Supply, installation, testing and commissioning of Desiccant type dehumidifier of capacity 170 CMH with input power supply 415 V, 3 phase, 50 Hz, equipped with microprocessor based control system having LED display indicating the status of input, Humidistat with digital display, made out of pre coated MS sheet , the dehumidifier is having totally self contained eco dry rotor/desiccant rotor, process & reactivation air flow sectors insulated with aluminium foils, unique PTFE bonded bulb seal design to minimize air leakages, the desiccant rotor is made of fluted honeycomb type with stainless steel perimeter flange to incorporate robust internal structure required for industrial quality, durability and easy serviceability and also to extend media and seal life. The desiccant rotor is non flammable and its media shall have high performance metal silicates synthesized in situ, differential air pressure switch to control reactivation air flow and indicating clogging of filters, High temparature thermostat cutout to economize the power consumption, additional cooling thermostat as a safety measure, electrical interlocking of fan motor, heaters and rotor drive as a safety measure, PTFE bonded silicon bulb seal design to minimize air leakage, dehumidifier shall have an option to control reactivation temparature, system parameters complete all as specified and as directed. Model : FFB170 of Make : Bry-Air or equivalent model of make Drystar India Pvt Ltd/ Salleria Solutions/ Munters/ Seibu Giken DST/ equivalent approved make of HQ CESC Pune/ GE confirming to relevant IS provisions. Note:(i) The quoted rate deemed to be inclusive of necessary foundation work with angle iron frame work all as per OEM recommendation, flexible rubber hose pipes along with perforated end caps for bird proof for connecting reactive air inlet and oulet line upto room outside by core cutting in any type of wall & control cable from equipment to MCB DB for full functionality of machinery. (ii) Manufacturer type test certificates/ test reports for equipments shall be submitted by contractor before claiming payment. (iii) The quoted rate deemed to be inclusive of service visit once in three months during defect liability period and contractor shall submit FDR of amount 2% on quoted rates before completion/processing final bill.

Supply, installing, testing and commissioning of LT feeder pillar box factory made cubical indoor type, slopy canopy fabricated out of 3mm thick CRCA sheet with angle iron base frame made of 40x40x6mm, 45cm height, floor mounted duly bolts and nuts grouted, dust and vermine proof, suitable for voltage 415V 3 phase 4 wire weather proof with IP-66 protection, with separate hinge door for each compartment for incoming and out going MCCB etc with locking arrangement, with back door openable (Screwed), legs grouted in PCC complete including painting with two coats of epoxy powder paint over a coat of primer after under going a rigorous metal treatment process involving alkaline degreasing, descaling in dilute sulphuric acid or any other acid and phosphate and with aluminium busbar (TPN), suitable double compression copper cable glands complete in all respect for bay work station and including provn of the following:- (a) MCCB 100A, 25KA, FP withThermal magnetic release,lcs=100% lcs -01 Nos, (b) MCCB 63A, 16KA, FP withThermal magnetic release,lcs=100% lcs -03 Nos, (c) Digital panel meter with LCD multifunction meter with CT/PT and all parameters as V,A,F,PF,KW,kVAR,kWH etc. (d) Phase indicator lamp R,Y & B (Set of 3)- 01 Set (e) S&F aluminium Bus bar 200Amps of suitable size, all are in equal size - Set(R,Y,B,N)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core. Note: Rate of under ground cable includes earth Work, sand cushioning, brick or PCC/RCC covering, light Grade GI tubing where necessary,testing etc.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel grip or wire armoured, electric power cables (heavy duty) 1100volts grade with stranded aluminium conductor of size 25 sqmm cable 4 core complete all as directed.

Supply & Laying of DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm polythylene including coupler & Bend with smoooth inernal and corrugated external surface for non pressue under ground cable complete all as specified and as directed by Engineer-in-Charge.

Supply & Laying of DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 25 mm polythylene including coupler & Bend with smoooth inernal and corrugated external surface for non pressue under ground cable complete all as specified and as directed by Engineer-in-Charge.

Material and labour for earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 32 mm x 6 mm by means of GI Welding made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead, 20 mm dia GI pipe for watering and earth plate surrounded by packed layer of coal and common salt, 15cm thick all around bottom and top, watering pipe of 20 mm bore of light grade with funnel all as shown in electrical plate No 3 of SSR Part-I (2009) and connecting to earthing test point, main switch board/ transformer neutral and testing on completion as directed including earthing pit in PCC (1:3:6) type C-1, pre-cast reinforced cover with MS XPM Jalli, RCC 1:1.5:3 cover slab of size 450 x 450 x 100 mm with one handle made out of 8 mm dia round bar, wire mesh and testing complete all as specified and as directed including dismantling old defective earth pit. Note: (i) Cost of GI earth Strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returninng & filling, PCC chamber pit, RCC cover & test point.

Supply & fix GI strip 32mm x 6 mm buried in ground / fixed inside duct complete all as specified and as directed by Engineer in Charge

Supply and fixing plug in box of sheet metal enclosure and in built neutral link for TPN system of MCCB 100 Amps, 4 Pole, 36 KA of IK08 and IP 42 protection complete all as specified and as directed by Engr-in-charge.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches any type of soil (soft/loose/hard/dense) not exc 1.5m wide and not exc 1.5m in depth for foundation, pipe, laying of cable etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out complete all as specified and as directed by Engineer-in-Charge

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil all as specified and as directed by Engineer-in -charge.

Removing excavated materials (soil) to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meters above the starting point all as specified and as directed by Engineer-in -charge.

M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation filling and mass concrete Complete all as specified and as directed by Engineer-in -charge.

M&L for PCC 1:2:4 type B-1, (20mm graded aggregate) 100 mm thick using as in floor finished even and smooth without using extra cement complete all as specified.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C 1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified and as directed by Engineer-in -charge.

M & L for rendering 15 mm thick in cement mortar 1:4 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair complete all as specified and as directed by Engineer-in-charge. Note: Water proofing compound will be measured and paid separately.

M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion)

M/s Karbhagam Sales Agency (BID ID -3297653)

surendra infrastructure pvt ltd (BID ID -3297912)

RK TRADERS (BID ID -3297951)