Wet Land Tourist Complex Kanjli Kapurthala

Amount

Development and Stabilizing of the tubwell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Capacity of Air compressor 300 cfm at 250 PSI

Development and Stabilizing of the tubwell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Repair of Pump Chamber size 3.05x3.70 mtr.

Hollock wood doors shutter windows including Hinges, Screws, Chocks Cleats, Stops and Cords etc. complete fixed in position (double Leaf) @ Paneled glazed or glazed and paneled

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)

Kiln seasonal Hollock wood cup board chowkats including iron hold fasts, iron hinges corner straps, wooden knobs or handles fixed in position (Size 45 x 60mm).

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint

Painting two coats excluding priming coat with ready mixed paint in all shades on new wood work With special quality paint.

Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (If fixed on wall face clamp to be paid separatly as per respective item)

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.

Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

White washing 3 coats inside of pump chamber

Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade.

Supplying & fixing glass panes including special metal sash putty of approved make.

RECESSED CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FRLS cable (ISI marked), 1100volts grade to be laid in heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for having electronic fan regulators (socket size), bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20 Amp. Sockets and 6 Amp./16/20Amp. Swithces (flush piano type accessories) etc.and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., & including the cost of flush piano type switches/sockets, step type electronic fan regulator 100 watts, PVC connector (For Fan Box andElectronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:-

Wiring fan point without fan box in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (socket size).

Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.

Wiring 3 Pin 6 Amp. Plug control comprising wall socket and switch including bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade complete.

Wiring 3 pin 16/20 amp. power plug control and switch.

GALVANIZED IRON PIPES AND G.I. EARTHING: Supply & erection of G.I. pipe for wiring purposes including Bends, inspection boxes etc., where necessary including Painting as per PWD General Specifications 2010:-

Earthing of Sheet metal/ iron clad Switches and metallic cases etc., with No. 7/12 S.W.G. (7/2.80mm dia.) G.I. wire in 20mm dia G.I. pipe partly recessed and partly on surface complete with 135cm long 50mm dia. G.I. earth pipe with G.I. reducing socket (50mm x 20mm) including erection of the same, 10 metre below ground level with necessary charcoal & salt mixture etc., up to 13 metre in length (including boring & refilling).

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make

Construction of gravel pit inside the Pump Chamber complete as per Drg.

Providing & installing, testing & commisioning of 1 no electrically driven Submersible Pump set capable of delivering 60 LPM against a head of 50 mtr along with electric panel board consisting of electrical appliances such as automatic Star Delta Push Button or oil imeersed starter, Main Switch, VM, AMpere Meter, ELCB, Shunt capacitor. Single phase, preventer, Indicating lamps, Kit-Kat etc., including GI column Pipe 50mm of IS: 1239-2004 medium class suitable size 60.00mtr(in 3mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable 70mtr 2.50mm2 IS694-1990 reaffirmed 2000 complete in all respects and as per standard specifications.

(Motor with Pump) 60 LPM, 50 mtr Head

Panel Board

Cable (Size/Cost) 2.50mm2

Column Pipe (G.I) ( Size/Length) 50mm i/d B-class

Disinfection Unit Providing Installing, testing & commissioning one no. Electronically actuated, Diaphragm operated, Metering System, Chemical Dosing, Chlorinator, Suitable for delivering 0.5 to 6 Litres fo Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg. cm2 and suction lift not less than 1.5 m, as per DWSS standard specifications

Providing and installing 100mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.inside the pump chamber as per standard design complete in all respects.

Providing and laying, jointing, fixing, testing ISI marked G.I. Pipe (as per IS 1239) B- Class, including cost of Specials such as tees,bends, sockets elbow etc., painting with anti corrosive bltumastic paint testing, cutting, threading inside building complete.

Providing and laying, jointing, fixing, testing ISI marked G.I. Pipe (as per IS 1239) B- Class, including cost of Specials such as tees,bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in buitup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation and watering including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.

All classes of soil except rocky.

Earth work upto 1.5 m Depth for

Providing and filling sand grading as per specifications or fine grade around the GI Pipe.

Providing, fixing and jointing G.I. union couplings (of approved make with the approval EIC) as per IS1879 in G.I. Pipe lines complete in all respect.

Providing and fixing in position Chinaware Indian Orisa water closet sizes 580mm (to the approval of the Engineer-in-charge) suiteconsisting of 10 ltr. PVC flushing cistern supported on angle iron bracket including cost of long bend 32 mm dia complete in all respect and to the entire satisfaction of engineer in charge.

Providing and fixing in position Chinaware European type water closet P trap or S trap (to the approval of the Engineer-in-charge) suite-consisting of 10 ltr. PVC flushing cistern supported on angle iron bracket, short bend 32 mm dia including cost of solid white cover complete in all respect and to the entire satisfaction of engineer in charge

Providing and fixing in position various China ware white ordinary lavatory suites of approved make (to the Engineer-in- charge) including brass studs without CP fittings complete in all respect

Size 560 mm x 410 mm (above counter oval)

Providing and fixing in position best Indian make vitreous Chinaware white large flat back or angular lipped front urinal 610 mm high (610 mm x 400 mm x 380mm) consisting of C.P. waste 32 mm dia C.P. brass spreader, complete.

Vitreous white Chinaware Partition

Large partitions size 835mm x355mm

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge)

C.P. brass Bib cock long nose/ long body without flange

C.P. brass Bib cock without flange

C.P. brass Bib cock Push type

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.

C.P.brass 15mm angle valve without flange

Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect.

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect.

PVC tube connection of size 15 mm x 375 mm with C.P. Brass nut

Providing and Fixing jet spray with 2'-6" long PVC pipe

with C.P brass nut

Providing & Fixing in position stop cock / Angle valve (as approved by the Engineer-in-charge)

C.P. brass 15mm concealed stop cock with flange

Providing and fixing in position CP Brass Grab Bar of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm C.P brass screws and washers and S/S studs on top complete in all respect (as required by the Engineer-in-charge)

Size 600mmx450mm

Dismantling wall tiles at any floor of the building laid in cement morter including scraping of cement plaster and disposal of malba at a suitable place with in a distance of 100 Mtrs of the complex complete in all respect

Dismantling floor tiles at any floor of the building laid in cement morter including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect

Providing and fixing PVC waste pipe 32mm complet in all respect

Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Anti-skid floor tiles 10mm thick in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with white cement slurry in joints including corners angles and beading.

Providing and fixing in position stainless steel sinks approved make (to the approval of Engineer-in-chagre) 1mm thick, grade-304 (18/8) with waste coupling complete in all respect.

Sink with drain board overall size 1050mm x 450mm bowl size 425mm x 350mm x 188mm

Excavation in Soil (any type) using Hydraulic Excavator CK 90. Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, all lifts and combined lead up to 60m

Cement concrete 1:6:12 with 40mm gauge stone aggregate using concrete mixer volumetric type. (Including Carriage)

Cement concrete 1:2:4 with stone ballasr or shingle using concrete mixer volumetric type (Including Carriage)

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth. (Including Carriage)

Conglomerate floor 50mm thick cement concrete topping 1:2:4 (Including Carriage)

12.5 mm thick cement plaster 1:2 and cement rendering on plaster 1 mm thick. Inside/outside

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure.

Cold twisted deformed (Ribbed/ Tor steel Bars) (fe 500 grade as per IS 1786-2008, for RCC works, where not inclueding in the complete rate of RCC including bending and placing in position complete (Including Carriage)

Providing and fixing 560 mm,500 mm and 450 mm internal diameter circular or 455 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per ISI 12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm (for EHD and HD).

560mm id R.C.C. Manhole cover with frame

Providing orange colour safity footrest of minimum 6 mm thick plastic encapulated as per IS 10910 on 12 mm dia steel bar confirming to IS: 1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruted legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend rest and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230 x 150 x 75 cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggregate) complete as per design.

Providing laying in trenches to correct gradient and alignment and jointing of uPVC pipes having ISI specifications IS:15328-2003 class-SN-8 marked make supreme, finolex, kissan, jain, prince or equalant good on them and laying the same in trenches to correct alignment and gradient, cutting and jointing, testing for water tightness and making the good leakage and defects including cost of specials (speicals and solvant should be of same make as that of pipes) complete in all respect

160mm o/d pipes

Making soak pit 2.5 m Outer Diametre 3.0 metre deep 230mm thick 1:5 brick work honey comb with bricks of Ist Class and S.W. drain pipe 100mm Diametre, 1:8 m long complete as per standard design.

Disilting of manhole including all safety measures, cost of containers, T & P and disposal of silt upto 5km complete in all respect

Depth upto 3m

Excavation manually in trenches with straight or open cutting in a built up street/ lanes having wall to wall width upto 3 metre for sewer and manholes to full depths including shoring dressing to correct sections and dewatering of rain water, provision for diversion for traffic, protection of existing services i.e. telephone cables electric lines, water supply lines and gas lines etc night signals, profiles, pegs, sight rails, boning rods, fixing and maintenance of caution boards, fencing, refilling trenches, watering, dressing and restoration of surface to original level and removal of surplus spoils from the site of work upto 15 metre, for all works other than connections to complete in all respect.

For depth not exceeding 2.0 metre B.G.L

For all classes of soil except rocky

Constructing brick masonry manhole in cement mortar 1:5 (1 cement : 5 coarse sand) R.C.C. top slab 20 cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 63.464 kg/per cum, foundation concrete 1:4:8 mix (1 Cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design in all respects. 2 Nos manhole size 75x120 cm for Sewer Line

Inside size 75 x 120 cm with depth 120 cm between bottom of top slab and invert (with manhole cover & frame Medium duty)

Cement Concrete 1:4:8 with stone blast 40mm guage using concrete mixing volumetric type including carriage.

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth. (Including Carriage)

Floating coat on benching

12:5 mm thick Cement Plaster 1:3 and cement rendring on plaster mm thick including carriage

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering and plinth including carriage.

Providing, fixing & jointing Gun metal peet valves (Heavy pattern) as per IS 778 with hand wheels on GI Pipe laid in ground or inside building includin carriage.

32mm i/d gun metal peet valve heavy pattern

Providing & fixing in position PVC water storage tanks triple layer make as approves by Engineer-in-Charge including hosting and carriage from store to site of work complete with providing and fixing 15mm or 20mm internal Diametre tanki nipple complete.(Excluding cost of platform).

Tripple layer tank

Providing and fixing in position automatic brass ball valves in tanks.

Brass ball cock with rod and plastic ball

P/F in position GI Tank Nipple of approved make in PVC water storage tanks complete in all respect

GI Tank Nipple 32mm i/d

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition.

Size 75 mm x 75 mm

Providing and fixing in position vitreous Chianware white channel of approved make (to the approval of Enginner-in-charge) of size 600 mmx100mm including laying and fixing in cement concrete 1:2:4 complete in all respect.

Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass screws, complete in all respects

C.P brass towel ring

Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS-13592 of approved make (to the approval of engineer-in-charge) including cutting, jointing wastage, but excluding cost of lead jointing

110mm o/d SWR UPVC pipe line laid complete

75mm o/d SWR UPVC pipe line laid complete

Cutting holes upto 23cm square thorugh B.B. in cement walls or stone masona ry wall in cement for pipes, and making good including repointing, replastering and finishing according to existing finish where required.

Through wall 11.43 cm thick

Through wall 22.86 cm thick

Providing and fixing in position SWR UPVC Specials for soil waste vent or anti syphonage pipes as per 'IS-14735 of approved make (to the approval of engineer -in -charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.

For 110mm o/d pipes

Bend with door

Bend Plain

P-Trap/Floor Trap 110x110mm

Collar

White vitreous china below counter oval wash basin size 560 x 450 mm, CP brass waste 32mm dia with single 15 mm C.P brass pillar tap.

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. with three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.

100mm internal Diameter HCI gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm

Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping

Size 600mm x 900mm inside with RCC 455mm x 455mm cover and frame light duty double seal

Shiv Shakti Trading Co.