Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.4 LAccepted-AOC CHOWDHARY APARTMENT BLOCK II FLAT NO 7 3RD FLOOR PUNJABIPARA SEVOKE ROAD SILIGURI DIST DARJEELING 734001 | JALPAIGURI | WEST BENGAL | 734001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹52.4 L+₹1.1 L (2.05%)Rejected-Finance MAHALAKPUR NIZAMPUR AGHWANPUR ROAD AGHWANPUR MORADABAD UTTAR PRADESH 244001 | MORADABAD | UTTAR PRADESH | 244001 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹53.7 L+₹2.4 L (4.71%)Rejected-Finance C O PULAK SAHA MAHAKAL PALLY SURYASEN PARK MAIN GATE SILIGURI 734001 DIST DARJEELING | JALPAIGURI | WEST BENGAL | 734001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹54.4 L+₹3.1 L (6.06%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹54.9 L+₹3.6 L (7.09%)Rejected-Finance BANKIM CHANDRA ROAD HAKIMPARA SILIGURI DIST DARJEELING PIN 734001 W B | JALPAIGURI | WEST BENGAL | 734001 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹46.8 L
EMD Value
₹93,600
Closing Date
29 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
COMPREHENSIVE MAINT OF AVN INFRA INCLUDING HANGERS, ATC AND ALLIED SERVICES AT SEVOKE ROAD MIL STATION
2023_MES_626139_1
8275/SEV OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹93,600
Yes
5 Jan 2024
1 Nov 2023
7 Dec 2023
1 Nov 2023
29 Nov 2023
16 Nov 2023
2 Nov 2023 - 11 Nov 2023
Amount
Demolition of cement concrete (un reinforced) in ground floors and paving not exc. 15 cm thickness (below or above ground level) removing rubbish off the premises etc complete all as specified and directed
Demolition of cement concrete (un reinforced) in ground floors and paving exc. 15 cm thickness (below or above ground level) removing rubbish off the premises etc complete all as specified and directed
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each, complete all as specified and directed.
Taking down shutters from frames exceeding 1 sqm but not exceeding 2 sqm each, complete all as specified and directed.
Demolition of brickwork built in cement mortar including taking out roots vegetation if any at any position and removal from site, complete all as specified and directed. complete all as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Taking down cement plaster or lime plaster on walls /ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retreived debris as directed including necessary scaffoldings etc complete all as specified and directed
Taking up or down 15 mm bore steel water tubing and connections, cleaning for refixing of serviceable portion and removing unserviceable portion complete all as specified.
Materials and Labour for plain cement concrete (1:2:4) type B-1, using 20mm graded stone aggregate as in surface channel and drain including necessary formwork complete all as specified and as directed.
Materials and Labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. all as specified and as directed.
Materials and Labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240
Supply & fixing mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
Supply & fixing rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, FE -290 Gde E-165, painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication (Note :- The rates should include the cost of necessary arrangements incl safety measures for woking at PEB Structure more than 10 m in height) , complete all as specified and as directed.
Supply & fixing 0.63 mm thick Galvanised, corrugated mild steel sheeting of grade O (120gm/Sqm zinc coating) with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc including dismantling old rusted sheets complete all as specified and directed. (Note :- The rates should include the cost of necessary arrangements incl safety measures for woking at PEB Structure more than 10 m in height)
Supply & fixing 0.80 mm thick plain galvanised mild steel sheeting of grade O (120gm/Sqm zinc coating) in ridges hips, valley gutters, drip and straight flashings with grade including dismantling old rusted sheets complete all as specified and directed. (Note :- The rates should include the cost of necessary arrangements incl safety measures for woking at PEB Structure more than 10 m in height and separation of serviceable portion for reuse)
All as per item No 15 here-in-before but except sheets complete all as specified and directed. (Note :- Old serviceable sheets obtained from dismantling shall be reused)
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.
Materials and labour for preparing of new wooden surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Materials and labour for preparing of old painted wooden surfaces of any description , over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Materials and labour for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Preparaing New zinc (or galvanised) surfaces to receive painting ,by coating with mordant solution including washing and cleaning etc complete all as specified and directed.
Materials and labour for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of coptic green paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
Materials and labour for preparing of old painted steel surfaces of any description , over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Materials and labour for preparing of old painted steel surfaces of any description , over 10 cm width or girth and applying one coat of coptic green paint , complete all as specified and directed. (Note for ser item no. 21 to 25 above :- The rates should include the cost of necessary arrangements incl safety measures for woking at PEB Structure more than 10 m in height)
Materials and labour for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 20mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed.
Materials and labour for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 20mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed.
Materials and labour for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado, skirting, vertical surfaces etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in cement mortar (1:4) , complete all as specified and directed.
Materials and labour for coloured 450x350x7-8 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick backing coat in cement mortar (1:3) , complete all as specified and directed.
Materials and labour for Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15 mm th screed bed in CM 1:6 complete including Necessary dismantling complete all as specified and as directed.
Materials and labour for Coloured Vitrified glossy tiles of 6 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors walls etc. set and jointed in neat cement slurry or fixing chemical and pointed in white or coloured cement to match over & incl 15 mm th screed bed in CM 1:4 complete including Necessary dismantling complete all as specified and as directed.
Materials and labour for 18-20mm thick Granite(of any type) Jet Black/ Red Lakha in one piece machine cut , as in steps , jambs, pillars, window cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing including rounding to edges of stone slabs such as in steps , cooking platforms, and other similar situations over and including 20mm thick bedding / backing layer in cement mortar (1:6) complete all as directed.
Materials and labour for machine cut kota stone slab 18-20 mm thick (of size not less than 55cm X 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shape of the slab including cutting,washing,rubbing and polishing as in floors over and including cement screed bed 20 mm thick in cement mortar (1:6) complete all as specified.
Materials and labour for machine cut kota stone slab 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match shape of the slab including cutting,washing,rubbing and polishing as in skirting over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surface,complete all as specified.
Materials and labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection etc. finished the surface of concrete fair and even, complete all as specified and directed.
Materials and labour for 75 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in sub-base of floors etc. complete all as specified and directed.
Materials and labour for brick work with fly ash bricks, moduler size, straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
Materials and labour for brick work with well burnt clay sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concrete water tubing or concrete conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed.
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, complete all as specified and directed.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
Supply and fixing 105 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings lock strike plate etc complete all as specified including filling plain cement concrete (1:2:4) type B-1, using 20mm graded stone aggregate in the frame.
Supply and fixing 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings lock strike plate etc complete all as specified including filling plain cement concrete (1:2:4) type B-1, using 20mm graded stone aggregate in the frame.
Supply and fixing flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing 30mm thick second class class hard wood glazed and skelton shutter, open rebated and prepared to receive glass gauze etc, divided into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed.
Materials and labour for 18/19 mm thick veneered particle boards interior grade, solid core, general purposes type, with face veneers of type 'BB', fixed with screws to timber frame work complete all as specified and directed
Materials and labour for external teak wood lipping 6mm thick and 18/19mm wide for particle boards fixed with nails complete as specified and directed.
Materials and labour for 19 mm thick plywood, grade BWR, type BB, fixed with screws as in cabinet and similar works complete all as specified and as directed.
Materials and labour for 0.90 mm thick Decorative laminate type 1 of surface finish colour and pattern as approved , fixed with approved adhesive as per manufacturer instructions as in cup board shutters, partitions and shelves complete as specified and directed.
Materials and labour for 1.5 mm thick Decorative laminate type 1 of surface finish colour and pattern as approved , fixed with approved adhesive as per manufacturer instructions as in cup board shutters, partitions and shelves complete as specified and directed.
Materials and labour for second class hard wood fillets area exc 3 sqcm but n.exc 6 sqcm wrought square or rectangular in section plain or bull nosed, splayed, chamfered or rounded on one edge or face fixed with nails complete as specified and directed.
Supply and fixing in repair anodised powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
Supply and fixing in repair anodised powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws handles 2 nos in each door,hinges etc. complete all as specified and directed
Supply and fixing powder coated aluminium (minium thickness of powder coating 50 micron) three track sliding windows incl frame, shutters of windows & ventilator including poviding and fixing 5.00 mm thick glass pane, roller , handle , locking arrangement, neoprene gasket etc , CP brass/stainless steel screws incl silicone sealant wherever required complete all as per specified and directed by the Engineer-in-charge
Materials and labour for repair of Aluminium doors/windows/fixed portions by dismantling the same, refixing the same after necessary repairs including replacing the EPDM neoprene rubber complete all as specified and directed by the Engr-in-charge
Supply and fixing Solid PVC Wall Lining consisting of 5mm thick single side pre laminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed
Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed
Supply and fixing Cubical of size 0.60x0.60x0.675 mtrs (minimum) madeout from 19 mm thick plywood grade BWR including front facia PVC laminated, with wall supported at back, ply on three sides, resting below cooking platform. The cubical shall have three baskets (cutlery, cup saucer and thali) made out of stainless steel of grade 304 fixed with telescopic drawer channels and accessories. The internal surface shall be laminated with white colour complete all as specified and as directed.
Supply and fixing in repairs Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
Supply and fixing in repairs in repairs mild steel stove enamelled black 300mm long ordinary rat tail rod pattern spring fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and directed.
Supply and fixing 75 mm brass handles cast type polished bright decorated type handle shall match the cupboards complete all as specified and as directed.
Supply and fixing Kitchen cabinet hinges 2 hole full over lay make of Godrej complete as specified and directed. Make: Godrej/ Hettich/ Linc
Supply and fixing ball bearing slide systems/Drawer/Telescopic Channel Set (16" -200 mm complete as specified and directed. Make: Godrej/ Hettich/ Linc
S&F in repaired Stainless steel fancy curtain rails plain or colour 20 to 25 mm dia as approved with teak wood finishing brackets and knobs complete all as specified.
Supply and fixing Solar control film 25 micron reflective type sticked to glass panes (as per instructions of manufacturers) complete all as specified and directed by the Engr-in-Charge
Supply and fixing mild steel butt hinges, 100 mm size , complete all as specified and directed.
Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 200 mm long, complete all as specified and directed.
Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed.
Supply and fixing extruded aluminium alloy handles, fabricated type, anodized, 150 mm size , complete all as specified and directed.
Supply and fixing for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
Supply and fixing in reepair continuous (Piano) hinges mild steel bright finish or electro galvanised, width of flaps when open 30mm complete as specified and directed.
Supply and fixing Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed.
Supply and fixing Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete without glazing bars, dovetailed or welded complete all as specified and directed.
Supply and fixing steel ventilators with top hung shutter including hinges,steel peg stay, including one shop coat of Zinc Chrome primer complete all as specified and directed.
Supply and fixing Mild Steel flat iron fillets fixed to fly proof steel window shutters with screws or riveted for securing wiring gauze etc and as in wind tiles for roof complete as specified and directed.
Supply and fixing 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exceeding 0.50sqm in each pane , complete all as specified and directed.
Supply and fixing 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exceeding 0.50sqm in each pane , complete all as specified and directed.
Supply and fixing 4 mm thick figured glass, ordinary quality and glazing with oil putty in squares n.exceeding 0.50sqm in each pane , complete all as specified and directed.
Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Materials and labour for rendering 15mm thick in cement morter (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
Materials and labour for rendering 20mm thick in two layers of 10 mm thick each in cement morter (1:4) on fair faces of brick work or concrete surfaces,WPC shall be mixed with morter of top layer, finished even and fair, complete all as specified and directed. (Note: WPC shall be measured and paid separately as supply only)
Supply only integral Water Proofing Compound of approved make.
Materials and labour for preparation of new/old plastered surfaces of wall and applying 1mm thick wall care putty of approved make complete all as specified and directed.
Materials and labour for applying one coat of white wash on old decorated wall surface including preparation of surface, complete all as specified and directed.
Materials and labour for applying one coat of white wash on old decorated ceiling surface including preparation of surface, complete all as specified and directed.
Materials and labour for applying one coat of oil bound distemper of approved colour with roller on old decorated wall surface including preparation of surface, complete all as specified and directed.
Materials and labour for applying one coat of cement based paint of approved colour on old decorated wall surface including preparation of surface, complete all as specified and directed.
Materials and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper of approved colour with roller over one coat of alkali resistant primer including preparation of surface complete all as specified and directed.
Materials and labour for preparation of new plastered surfaces of walls and applying two coats of weather proof exterior emulsion paint of approved colour over one coat of primer including preparation of surface complete all as specified and directed.
Materials and labour for for preparation of old decorated surfaces of walls including brooming down or steel wire brushing scraping down smoke shoot, moulds, moss and efflorescent salt sand trading oil and greasy spots and applying one coat of antifungal exterior emulsion paint (as per manufacturer instructions) complete as specified and directed.
Materials and labour for preparation of new plastered surfaces and applying two coats of cement based paint over a coat of cement primer on wall complete all specified and directed.
Materials and labour for complete removal of existing paint from surfaces of wall and applying two coats of weather proof exterior emulsion paint of approved colour over one coat of primer after preparation of surface complete all as specified and directed.
Materials and labour for complete removal of existing paint from surfaces of wall and applying two coats of weather proof exterior emulsion paint of approved colour over one coat of primer and 1-2 mm thick putty including preparation of surface complete all as specified and directed.
Materials and labour for complete removal of existing paint from surfaces of wall and applying two coats of oil bound distemper with roller over one coat of primer of approved colour after preparation of surface complete all as specified and directed.
Fixing only old serviceable 15 mm bore medium grade galvanized steel water tubing with all new fittings, including necessary cutting and screwing, fixed to wall/ceiling or laid in floor complete all as specified.
Supply and fixing 15 mm bore medium grade galvanized steel water tubing with all fittings, fixed to wall/ceiling or laid in floor complete all as specified.
Supply and fixing in repairs, stainless steel sink with drainage board, 1 mm thick for kitchen or laboratoty with plugs, waste pipe, washers, including cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortar to dwarf wall, overall size 915x460mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling and PVC waste pipe complete all as specified and directed.
Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with CP brass bracket guard railing 60cm long complete all as specified and directed.
Supply and fixing in repair snow white vitreous China wash down water closet pan (pedestal pattern), white with "P" or "S" Trap, one piece EWC 'S' front or back inlet fixing bolts, soft PVC seat cover, with intigrated twin flush flushing cistern complete and making all necessary connection as specified and directed.
Supply and fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white with "P" or "S" Trap front or back inlet fixing bolts, PVC seat cover but excluding cistern complete and making all necessary connection as specified and directed.
Supply and fixing in repair Vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) incl setting the trap and pan in cement mortar (1:3:6) all round and "P" or "S" Trap, complete all as specified and directed.
Supply and fixing in repair 10Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
Supply and fixing in repairs vitreous china ware wash hand basin with pedestal, white colour flat back of size 630x450mm including CI brackets, CP brass waste coupling 32mm and waste pipe etc complete all as specified.
Supply and fixing in repairs vitreous china, white, flat back wash hand basin of size 525 mm x 415 x 140 mm thin Rim counter top basin including counter with jet black granite with and including CP brackets (of suitable size) including 32 mm bore brass chromium plated waste coupling, 32 mm dia PVC waste pipe etc complete all as specified.
Supply and fixing in repairs vitreous china ware wash hand basin white colour flat back of size 630x450mm including CI brackets, CP brass waste coupling 32mm and waste pipe etc complete all as specified.
Supply and fixing in repairs vitreous china bowl urinal flat back size 355 x 340 x 535 mm white (minimum) with gratings and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipes) etc all as directed and specified by Engr-in-Charge.
Supply and fixing in repairs vitreous china urinal, half stall type, white including waste pipe,waste coupling and sprinkle push type, including CP spreader, flush pipe and waste pipe complete all as specified and directed.
Supply and fixing in repair plastic seat cover for EWC, closed pattern with flat bottom and cover fixed with aluminium hinging device complete all as specified and directed.
Supply and fixing for 600mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed.
Supply and fixing for 450mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed.
Supply and fixing in repairs, 15mm cromium plated Bib taps, cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
Supply and fixing in repairs, cromium plated Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, complete all as specified and directed.
Supply and fixing in repairs 15 mm stop valve (male or female thread) cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe and fixed complete all as specified and directed.
Supply and fixing in repairs 15 mm angle stop valve cast (male or female thread) copper alloy chromium plated fancy type with capstan head, wall flange screwed down screwed for iron pipe and fixed in repairs make as approved by GE
Supply and fixing in repairs 15mm bore dia Stop cock cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed.
Supply and fixing in repairs 15mm bore dia angle cock cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed.
Supply and fixing in repairs 15mm bore dia two way bib taps cast copper alloy chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed.
Supply and fixing in repairs CP brass overhead shower 80mm dia round shape with and including CP brass shower arm 240mm long with wall flange complete all specified and directed.
Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
Supply and fixing CP Soap dish holder including CP screws complete all as specified and as directed.
Supply and fixing CP Soap dispenser with glass bottle including CP screws complete all as specified and as directed.
Supply and fixing CP Towel ring, square type including CP screws complete all as specified and as directed.
Supply and fixing CP Toilet paper holder including CP screws complete all as specified and as directed.
Supply and fixing Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed.
Supply and fixing in repairs CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.
Supply & fixing CI Floor trap 100mm diameter of outlet, with gratings, including jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) complete all as directed.
Supply and fixing PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 110mm bore with access door, complete all as specified and directed.
Supply and fixing PVC (SWR) junction (Single T) equal or unequal 110mm bore with access door, complete all as specified and directed.
Supply and fixing PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 75mm bore with access door, complete all as specified and directed.
Supply and fixing PVC (SWR) junction (Single T) equal or unequal 75mm bore with access door, complete all as specified and directed.
Supply and fixing PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
Supply and fixing 32mm bore Bottle trap of chromium plated having minimum water seal of 25mm .
Supply and fixing Grating doom 100 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc
Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board etc for kept in store and for later use all as directed.
Materials and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead, drawing through in and including PVC rigid conduit of size not less than 20mm, partly concealed and partly surface conduit as in hangers, with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell controlled by one switch one way 5 Amps complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates. all as specified and directed.
All as per Item No.139 above but for One 2/3 pin socket outlet 5/6Amps on independent board
All as per Item No.139 above but for One 2/3 pin socket outlet 5/6 Amps on the same board with other switches.
All as per Item No.139 above but for one switch socket combination 15/16 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm
Materials and labour for concealed point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead, drawing through in and including PVC rigid conduit of size not less than 20mm, as in hangers, with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for four nos of highbay hanger lights controlled by one switch complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates. all as specified and directed.
Materials and labour for point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid casing caping (medium grade) with all fittings & accessories including provn of MS sunk terminal box of minimum thickness 1.6 mm fixed flush to wall for mounting switch, socket, fan regulator etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item No.144 above but for One 2/3 pin socket outlet 5/6Amps on independent board
All as per Item No.144 above but for one switch socket combination 15/16 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm
Supply and fixing Switch piano, flush type, single pole, one way switch 5 Amps. (Note :- switches to be used both for new point wiring and old switch boxes of existing wiring)
Supply and fixing Switch socket combination 3 pin, 5 Amps flush type, 240 volts.
Supply and fixing Switch socket combination multipurpose 5 and 15 Amps,5 in 1, flush type.
Supply and fixing Ceiling rose surface PVC, 3 terminals 25x50mm all as directed.
Supply and fixing Socket outlet 3 pin, 5 Amp flush type universal, 240 volts.
Supply and fixing in repair electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed.
Taking down existing unserviceable FTL light fitting and Supply and fixing new decorative box type fitting with LED light fitting 9 watt 2 feet with Aluminium extruded batten luminaire for 230 volt AC all as directed.
Taking down existing unserviceable FTL light fitting and Supply and fixing new decorative box type fitting with LED light fitting 20 watt 4 feet with Aluminium extruded batten luminaire for 230 volt AC all as directed.
Fixing only old serviceable light fittings, any type recovered from dismantling of internal wiring work including making necessery end connections with suitable wire all as directed.
Labour only for taking down any unserviceable street light fittings/flood light/building security light/bollard light fitting any type/size at a height upto 16 meter and refixing same after repair/replacement of all unserviceable accessories of any type and size from existing position/location or removing connection by cleaning terminals and removing materials to store for keeping in safe custody for repair work or taking credit all as specified and as directed. (Note: Items required for repair work will be measured and paid seperately under relevant items as under as supply only)
Supply only highbay light having LED light source of 120W having lumen efficiency upto 130LPW, IP66 protection with front toughened glass incl all necessery connecting arrangements upto 15m height as per site requirements all as specified and directed..
Supply only LED 35 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia 40 mm bracket complete all as specified and directed.
Supply only MS adopter for street light fitting of existing size and shape with nut bolts inclusive of one primer coat , one finished coat of aluminium paint all as specified and as directed by Engr-in-Charge.
Supply and fixing in repair LED street light of capacity 70 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaire efficacy ≥110 lumens/watt,CRI>70 ,PF > 0.95,CCT=5700±300,IP66,impact resistance IK 07 ,inbuilt protection against lightning , over voltage , short circuit and surge/spike protection upto 10kV including connection with PVC insulaed PVC sheathed, multistranded copper conductor cable of size 1.5 sqmmX 3 core from light fitting to ceiling rose.
Supply and fixing in replacement low intensity aviation obstruction lamp, LED type pressure cast Al body, polycarbonate enclouser material, less than 15Watt power consumption, in colour blue/red/yellow as per site requirement confirming IP-65 as per IS-13947 with all necessery fixtures, mounting plate and connection required all as directed.
Taking down existing unserviceable light fitting and Supply and fixing new surface mounted square pattern LED (Panel 2X2) luminaire, 36W, 230 Volts including driver and necessary fixing arrangements complete all as specified and directed
Taking down existing unserviceable light fitting and Supply and fixing new surface mounted square pattern LED (Panel 1X1) luminaure light, 20W, 230V including driver and necessary fixing arrangements complete all as specified and directed
Materials &Labour for concealed submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor of size 2.5 Sqmm one single core PVC insulated, unsheathed stranded copper conductor 2.5 Sqmm green in colour as earth lead drawn through existing conduit incl taking down old unsv aluminium sub-main wiring complete all as specified and directed by Eng-in-Charge .
Materials &Labour for concealed submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor of size 4.0 Sqmm one single core PVC insulated, unsheathed stranded copper conductor 4.0 Sqmm green in colour as earth continuity conductor drawn through existing conduit incl taking down old unsv sub-main wiring complete all as specified and directed by Eng-in-Charge .
Materials &Labour for concealed submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm one single core PVC insulated, unsheathed stranded copper conductor 6.0 Sqmm green in colour as earth lead drawn into and including rigid non-metallic PVC conduit, medium grade with all fittings and fixings accessoriesin incl taking down old unsv aluminium sub-main wiring complete all as specified and directed by Eng-in-Charge .
Materials &Labour for concealed submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor of size 10.0 Sqmm one single core PVC insulated, unsheathed stranded copper conductor 10.0 Sqmm green in colour as earth lead drawn into and including rigid non-metallic PVC conduit, medium grade with all fittings and fixings accessoriesin incl taking down old unsv aluminium sub-main wiring complete all as specified and directed by Eng-in-Charge .
Supply and fixing MCB distrubution board TPN 4way, double door, IP 43, IK-09, sheet steel, phosphatised,powder coated with 100 amps rated copper bus-bar,neutral link,earth bar and din rail, 415 V, including taking down existing unserviceable DB with MCBs complete all as specified and directed. by Engineer-in-charge.
Supply and fixing MCB distrubution board SPN 12way, double door, IP 43, IK-09, sheet steel, phosphatised,powder coated with 100 amps rated copper bus-bar,neutral link,earth bar and din rail, 240 V, including taking down existing unserviceable DB with MCBs complete all as specified and directed. by Engineer-in-charge.
Supply and fixing MCB distrubution board SPN 8way, double door, IP 43, IK-09, sheet steel, phosphatised,powder coated with 100 amps rated copper bus-bar,neutral link,earth bar and din rail, 240 V, including taking down existing unserviceable DB with MCBs complete all as specified and directed. by Engineer-in-charge.
Supply and fixing MCB Single pole, 230 volts 5 to 32 Amps 10 KA rupturing capacity, C series
Supply and fixing MCB Double pole, 230 volts 40 Amps, 10KA rupturing capacity, C series
Supply and fixing MCB Tripple pole & neutral, 415 volts 40/63 Amps, 10KA rupturing capacity, C series
Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, cable trench etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed.
Supply & laying 50 mm outside dia double wall corrugated pipe(DWCPE) for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed.
Taking down existing unsv/faulty LT UG cable 1100V of any size from existing location and relaying the same after necessary repair work all as specified and directed. (Note: Items if required for repair and excavation works will be measured and paid separately under relevant items)
Supply and laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 35 Sqmm 3.5 Core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed including taking down old unserviceable XLPE cable with brick protection and complete all as specified and as directed.
All as per Item No.179 above but size of XLPE cables 16 Sqmm 4 Core.
All as per Item No.179 above but size of XLPE cables 10 Sqmm 4 Core.
Supply and fixing cable jointing kit for 1.1KV grade for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE, armoured, aluminium conductor cable of size 16 to 35 Sqmm including taking out & relaying damaged cable after repair complete all as specified and as directed. (Excavation and connected items will be measured and paid separately)
Supply and fixing cable jointing kit for 1.1KV grade for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE, armoured, aluminium conductor cable of size 50 to 95 Sqmm including taking out & relaying damaged cable after repair complete all as specified and as directed. (Excavation and connected items will be measured and paid separately)
Supply and fixing as in repairs MCCB four pole , 415 Volt, 63 Amps,16 KA , fixed thermal & magnetic setting complete all as specified and directed .
Supply and fixing as in repairs MCCB four pole , 415 Volt, 100 Amps,16 KA , fixed thermal & magnetic setting complete all as specified and directed .
Supply and fixing as in repairs MCCB four pole , 415 Volt, 125 Amps,16 KA , fixed thermal & magnetic setting complete all as specified and directed .
Materials and labour for boring horizontal holes 100 mm dia upto 2mtr deep in soil under roads/PCC as directed for cable passing through pipes of required size and disposal of soil to a distance not exc. 50m. (Note: Connected items like Pipes is measured and paid seperately under relevant items).
Materials and labour for water proof, 3core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of street light fittings, complete all as specified and directed.
Supply and fixing 20 mm dia PVC conduit by using GI clamp of suitable size including nuts and bolts on the Steel/RCC poles by disconnecting existing open/loose 1.5 Sqmm single/three core pvc wire and inserting same in PVC conduit complete all as speciifed and as directed by engineer-in-chrage.
Supply and fixing thermoplastic polycarbonate cable junction box having protection IP 66, dust proof, acid resistant, shock proof, fire retardent, self extinguisher for outside installation with knockout entry for cable of size 16 sqmm and size 155x210x92mm with terminals, brackets for street light pole mounting and provision of one 6A MCB SP all as specified and as directed.
Materials and labour for servicing of cable junction box by taking out old servicable cable and refixing same after putting insulation tape over XLPE cable and inserting suitable size lugs complete all as specified and as directed.
Materials and labour for PCC (1:2:4) type B-1 (20 mm graded aggregate) for foundation, coping, grouting etc, finished even and smooth without using extra cement all as directed.
Materials and labour for repairing of junction boxes by replacing all cable terminals followed by dressing of cable heads with lugs and refixing with two aluminium strips with nut bolts complete all as specified and as directed.
Servicing of LT Panel including fixing of damaged doors, disconnecting of all LT cable and putting ampre tape all around alongwith the insulation tape of three colour refixing including, painting of entire panel with two coats of syntheic enamel paint and replacement of lugs complete all as specified and directed.
Materials and labour for painting steel pole/LT Panel/feeder pillar two coats of synthetic enamel paint yellow/black after preparation of surfaces complete all as specified and as directed.
Materials and labour for preparation of surfaces of old decorated RCC poles/plastered surfaces and applying two coats of cement based paint complete all specified and directed.
Materials and labour for two coats of aluminium paint on metalic surface for street light pole and other steel surface after preparation of surfaces complete all as specified and as directed by Engr- in-Charge
Materials and labour for GI bracket made out of 40 mm bore light grade GI Pipe with two sets of clamps grouted in wall with four number of wall fastners , bend to shape all as directed, length of GI Pipe shall not be less than 1.50 metre for fixing of light fittings including taking out old unservicable bracket complete all as specified and as directed.
Materials and labour for GI bracket made out of 40 mm bore light grade GI Pipe with two sets of clamps to be fixed on cement/tubular pole , bend to shape all as directed, length of GI Pipe shall not be less than 1.50 metre for fixing of street light fittings including taking out old unservicable bracket complete all as specified and as directed.
Materials and labour for earthing complete with galvanized steel pipe electrode 40mm bore , medium grade, 2.5 meters length, buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground level connected with earthing lead galvanized iron strip of size 25x5 mm connected to galvanized earth pipe by means of bolts, nuts, checknuts and washer of galvanized iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanized steel tube for watering with one end fix with cast iron funnel and wire-mesh , with protection pipe of 32 mm dia light grade galvanized steel tubing upto 7.5 meters length for drawing earthlead including common salt, charcol , bentonite in alternate layers etc, complete all as shown in EP number 2 of SSR part-1 including testing on completion and including taking down old u/s earthing & testing complete all as specified and as directed.
M S BHARAT CONSTRUCTION CO.
MARWA CONSTRUCTION
SRI SURAJIT SENGUPTA
M/S ASHWIRBAD WOODCRAFT
BIJAN KUMAR DHAR
M/S DUTTA & DAS ENGINEERING CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .