PROVISION OF ELECTRIC CONNECTION FOR PACKAGE TYPE MECHANICAL LAUNDRY AT THE MLIRC, PROVISION OF LIGHT FITTINGS WITH MAST AT ROCK CLIMBING WALL AT TRG AREA OF CDO WING AND REPLACEMENT OF LT POLES, SECURITY LIGHTS AT NAGZEERA LINES UNDER GE BELGAUM

Amount

M&L for point wiring complete with 1.5 Sq mm single core PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded cables drawn through and including rigid PVC conduit pipes and provision of one run of PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of 1.6mm thick MS pressed steel terinal box flush mounted with wall alongwith 3mm thick plastic laminated sheet for mounting modular switches/ sockets etc. for one light point controlled by one switch 1 way complete all as specified and directed. all as specified and directed.

All as described in item No. 01 but for one fan/exhaust fan point controlled by one switch and regulator.

All as described in item No. 01 but for one 05 Amps socket outlet on independent board.

All as described in item No. 01 but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 01 but wiring with 4 Sqmm single core PVC insulated FRLS unsheathed 1100 volt grade multi-stranded copper conductor cable and with one run of single core PVC insulated FRLS unsheathed 1100 volt grade multi-stranded copper conductor cable of size 4 Sqmm for earth continuity conductor and connecting to common earth dolly, complete for one 15 Amps power socket point on independent board all as specified and directed.

M&L for sub main wiring with 4 runs of single core PVC insulated FRLS unsheathed multi-stranded copper conductor cables of size 10 sqmm drawn through and 1100 volt grade including PVC conduits/ PVC casing and capping of suitable size with all necessary fittings and provision of one run of 106 sqmm PVC insulated FRLS unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly complete all as specified and directed. Note: Four runs of 10 sqmm cable, one run of 10 sqmm earth conductor cable and one run of PVC casing and caping shall be measured and paid together as one unit length.

M&L for sub main wiring with 2 runs of single core PVC insulated FRLS unsheathed multi-stranded copper conductor cables of size 6 sqmm drawn through and 1100 volt grade including PVC conduits/ PVC casing and capping of suitable size with all necessary fittings and provision of one run of 6 sqmm PVC insulated FRLS unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly complete all as specified and directed. Note: Two runs of 6 sqmm cable, one run of 6 sqmm earth conductor cable and one run of PVC casing and caping shall be measured and paid together as one unit length.

S&F switch, piano type, 5 Amps, flush button, 230 volts, AC, one way all as specified and directed.

S&F switch, piano type, 15 Amps, flush button, 230 volts, AC, all as specified and directed.

S&F socket outlet 5 Amps 2 cum 3 pin flush type multipurpose all as specified and directed.

S&F socket outlet 15 Amps, 3 pin 5 Amps cum 3 pin 15 Amps, flush type multipurpose all as specified and directed.

S&F fan regulator electronic step type suitable for 1200/1400 mm sweep ceiling fan all as specified and directed.

S&F ceiling rose 3 terminal suitable for 230 volts AC supply all as specified and directed.

S&F industrial type triple pole and neutral enclosure, powder coated, wall mounted, with a plug and socket complete, 63 Amps, 415V, IP 67 grade of protection, including provision of one Triple pole MCB 63 Amps 'C' curve type all as specified and as directed. Make: Cat No. 5078 64 TEMPRA model of LEGRAND or equivalent in HAVELLS/ L&T/ ABB/ SIEMENS/ C&S

S&F industrial type triple pole and neutral enclosure, powder coated, wall mounted, with a plug and socket complete, 32 Amps, 415V, IP 67 grade of protection, including provision of one Triple pole MCB 32 Amps 'C' curve type all as specified and as directed. Make: Cat No. 5078 62 TEMPRA model of LEGRAND or equivalent in HAVELLS/ L&T/ ABB/ SIEMENS/ C&S

S&F MCCB DB VTPN 4 Way, vertical type, suitable for MCCB as incomer 415 volts rated bus bars double door type including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCCB DB on board complete all as specified and directed.

S&F MCB DB SPN 12 Way without bus bars single door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and directed.

S&F MCCB TPN 125 Amps, 25KA, 415 Volts, AC supply, fixed thermal magnetic settings, all as specified and as directed.

S&F MCB DP 63A 'C' series 10KA 50Hz 240 Volts AC supply all as specified and as directed.

S&F MCB SP 6-32A 'C' series 10KA 50Hz 240 Volts AC supply all as specified and as directed.

S&F surface mounting LED light fitting, 1x 20W, 230V, wall/ ceiling mounted type, with extruded aluminium housing and polycarbonate diffuser, 20W LED strip, integrated electronic driver and all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block and provision of 2 Nos. of PVC square blocks all as specified and directed. Make: HAVELLS LUMILINE PLUS or equivalent in CG/ Philips/ Wipro

S&F 34 Watts LED glare free luminaire recess mounted in square profile 2ft x 2ft size with 34 W high brightness SMD LEDs for glare free homogenous illumination, including electronic driver etc. complete with all accessories internally pre wired including cutting of false ceiling sheet to required size and fixing aluminium strip as per the existing size in false ceiling for fixing of light fitting and providing aluminium strip supports as reqd and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block all as specified and directed. Make: HAVELLS VENUS NEO HE 2x2 or equivalent in CG/ Philips/ Wipro

S&F 25 Watts LED security light fitting, with pressure die cast aluminium housing and lens embedded PC cover having top opening separate driver compartment with IP65 protection, 25 Watts high power LEDs, electronic driver including all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block including provision of bracket made out of GI pipe light grade of suitable size and length and bent to shape fixed to walls/ poles with suitable MS clamps, bolt, nuts etc. complete all as specified and directed. Make: ENDURA PEARL model of HAVELLS or equivalent in Crompton Greaves/ Philips/ Wipro

S&F ceiling fan, 230 volts, single phase, 1200mm sweep, 3 blades, with all accessories complete all as specified and as directed. Make: HAVELLS Model No. ES-50 or equivalent model in Crompton Greaves/ USHA

S&F exhaust fan, 300mm sweep, 230/240 Volts, 1350 RPM, single phase, metallic finish powder coated, with wire grid protection and fixing arrangements with fixing bolts and provision of 3 core flexible copper conductor cable of size 1.5sqmm size from ceiling rose to connector of exhaust fan and testing including making cirlar of suitable size in wall and making good disturbed surfaces all as specified as directed. Make: Havells VENTL-AIR DSP model or equivalent model in Almonard/ Crompton Greaves

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth and getting out in soft/ loose soil for foundation all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth and getting out in hard/ dense soil for foundation all as specified and directed.

Excavating in trenches n exc 1.5m wide and depth exc. 1.5m but n exc 3m and getting out in hard/ dense soil for foundation all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers n.exc 25cm thick all as specified and directed.

Removing excavated materials to a distance n exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

M&L for plain Cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate for foundation of poles complete all as specified and directed

M&L for plain Cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping including use of necessary form work complete all as specified and directed

M&L for double wall corrugated HDPE pipes, conforming to IS 14930-2001, ISI marked, 63mm outer dia, as in cable protection, fixed to poles/ walls with necessary MS clamps, bolts, nuts, washers or laid in trenches/ under roads/ crossing etc. all as specified and as directed.

All as described in item No. 33 but HDPE pipes of size 120mm outer dia

M&L for GI tubes, light grade, 40mm bore, as in cable protection, fixed to poles/ walls with necessary MS clamps, bolts, nuts, washers or laid in trenches / under roads/ crossing etc. all as specified and as directed.

All as described in item No. 35 but GI tube of size 50mm bore

All as described in item No. 35 but GI tube of size 80mm bore

M&L for bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size and including painting two coats with aluminium paint over one coat of primer all as specified and as directed

Taking down existing unserviceable LT UG cables of any description and size and in any position ncluding making good disturbed surfaces all as specified and as directed.

M&L for XLPE insulated, armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 240 Sqmm x 3.5 core, laid in trenches/ passing through pipe/ duct or fixed to wall including provision of necessary lugs/ thimbles/ ferrules, connecting up, testing and commissioning complete all as specified and as directed. Note: Excavation, earth work, DW pipe/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule.

All as described in item No. 40 but LT UG cable of size 95 sqmm x 3.5 core

All as described in item No. 40 but LT UG cable of size 25 sqmm x 4 core

All as described in item No. 40 but LT UG cable of size 16 sqmm x 4 core

All as described in item No. 40 but LT UG cable of size 10 sqmm x 4 core

All as described in item No. 40 but LT UG cable of size 6 sqmm x 4 core

M&L for outdoor heat shrinkable end termination joint, suitable for 3.5 core LT XLPE insulated cables of size 240 sqmm complete with jointing material and accessories termination joint all as specified and as directed

M&L for steel tubular swaged poles complete with mild steel base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) erected in position including dismantling existing unserviceable street light PCC poles of any type and of any size/ length after disconnecting the existing electrical connections including making good the disturbed surfaces all as specified and as directed. Notes: Excavation, earthwork, foundation concrete and coping shall be measured and paid separately under relevant items of this Schedule.

S&F in repairs street light brackets madde out of 40mm dia x 1.20m long medium grade GI tube bent to 120 degree shape and fixed to poles with 2 Nos. of MS flat iron clamps of size 25 x 4mm with necessary bolts, nuts, washers etc. complete all as specified and as directed.

S&F in repairs street light timer panel, three phase, 12 KW load, with 24 hour digital timer, 65/ TP rating contactor and 63 Amps MCB TPN, fitted in and including suitable size powder coated sheet steel enclosure complete fixed on pole/ wall with suitable size MS brackets all as specified and as directed. Make: Havells Cat No. IHXTS09120 OR eqvt in Bajaj /HPL

S&F in repairs Sheet Moulding Compound (SMC) Junction box, 300 x 200 x 105mm internal size, off white colour, with front hinged type door and locking arrangement with and including provision of 1 No. of 8way bakelite connector terminal block suitable for cable upto 16 sqmm size and provision of 1 No. of MCB SP 6 Amps, box fixed on pole/ wall with suitable clamps, bolts and nuts all as specified and as directed. Make: SINTEX/ NATIONAL/ HENSEL or equivalent

M&L for flexible PVC insulated and sheathed copper conductor cable of size 4 core x 2.5 sqmm including connecting up and testing complete, fixed in repairs, all as specified and directed.

S&F in repairs energy saving LED street light fittings, with in-built electronic driver, 48 Watts, IP 66 class of protection with versatile pressure die-cast aluminium body, asymmetric optics and high power LEDs 6000K and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block including provision of street light bracket made out of GI pipe light grade 40 mm dia not less than 1.20 metres in length and bent to shape fixed to walls/ poles with suitable MS clamps, bolt, nuts etc. all as specified and as directed. Make: Havells Endura City Liner Neo Model LHETAXU7PN6W048 or equivalent in Philips/ Bajaj/ CG

S&F in repairs energy saving LED street light fittings with in-built electronic driver, 60 Watts, IP 66 class of protection with versatile pressure die-cast aluminium body, asymmetric optics and high power LEDs 6000K and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block including provision of street light bracket made out of GI pipe light grade 40 mm dia not less than 1.20 metres in length and bent to shape fixed to walls/ poles with suitable MS clamps, bolt, nuts etc. all as specified and as directed. Make: Havells Endura City Liner Neo Model LHETAXU7PN6J060 or equivalent in Philips/ Bajaj/ CG

S&F in repairs energy saving LED street light fittings with in-built electronic driver, 80 Watts, IP 66 class of protection with versatile pressure die-cast aluminium body, asymmetric optics and high power LEDs 6000K and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block including provision of street light bracket made out of GI pipe light grade 40 mm dia not less than 1.20 metres in length and bent to shape fixed to walls/ poles with suitable MS clamps, bolt, nuts etc. all as specified and as directed. Make: Havells Endura City Liner Neo Model LHETAXU7PN6J080 or equivalent in Philips/ Bajaj/ CG

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5m below normal ground level connected to GI wire 4mm dia (7.5m long) by means of GI bolts nuts washers and GI wire protected by 15mm dia light grade GI pipe (7.5m long) and watering arrangements with 20mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule Part I including necessary excavation and earth work in any type of soil, charcoal, dust salt, PCC 1:2:4 type B1 in chamber, 40mm thick RCC 1:2:4 type B1 in cover slab with 8mm dia TMT bars at 100mm C/C both ways and with 8mm dia MS hook complete and testing all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick, burried directly in ground vertically (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5m below normal ground level connected to GI strip of size 32x6mm or 25 x 4mm thick by means of GI nuts, bolts and washers and 50 mm dia GI pipe light grade for protection of earth lead and connected to control board or as directed by Engineer-in-Charge 20mm dia GI pipe medium grade for watering arrangement and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule Part I including necessary excavation and earth work in any type of soil, charcoal, dust salt, PCC 1:2:4 type B1 in chamber, 40mm thick RCC 1:2:4 type B1 in cover slab with 8mm dia TMT bars at 100mm C/C both ways and with 8mm dia MS hook complete and testing all as specified and directed.

S&F GI strip of size 32 mm x 6 mm burried in ground as in earth continuity conductor including connecting to test point/ terminals all as specified and as directed

M&L for LT cable route indicator, moulded cast iron body, oval shaped, 200x150x6mm size with embosing "LT 1.1 KV CABLE" fixed on 400mm long MS support made of angle iron of size 25x25x5mm with 2 sets of bolts, nuts and washers and painting with 2 coats of synthetic enamel paint over a coat of primer including embedding the same into and including sitable size foundation in PCC 1:4:8 Type D2 including necessary excavation and earth work as directed by Engineer in Charge.

Supplying, installing, testing and commissioning of 12.5 metres high mast made of hot dip Galvanised iron, continuously tapered, 20 sided polygonal cross section suitable for wind velocity as per IS 875 Part-III, with double drum motorised winch with separate handle for manual operation, raising and lowering type lantern carriage designed to carry and including provision of 06 Nos. of 200 Watts LED flood light fittings alongwith its control gears, juncton boxes, top pulley with weather proof cover, stainless steel wire rope of 7/ 19 construction (minimum 6mm dia) of suitable length for raising/ lowering the lantern carriage including provision of lightning conductor made out of single spike GI finial 1200mm long, aviation obstruction LED light, outdoor stand mounted feeder pillar box, multicore flexible copper conductor control cables of required size for winch, flood light fittings and aviation obstruction light fitting including connecting up copper cables from Panel board to high mast junction box and from Junction box to light fittings including provision of suitable RCC foundation, steel foundation bolts and outdoor stand mounted feeder pillar box complete all as per manufacturer's technical specifications and instructions and as directed.

Make of high mast: BAJAJ/ CROMPTON / VALMONT/ SURYA Make of light fitting: Havells JETA PRO PLUS Cat No. LHFPCZBFP46J200 or equivalent in Bajaj/ Crompton/ Philips

Supplying, installing, testing and commissioning of LT Feeder pillar box, outdoor cubicle type, factory made, IP 54 protection class, KIOSK type, 1500mm x 1500mm x 300mm size, 415 volts, 50Hz, 3 phase, 4 wire system with 300 Amps current carrying capacity, made out of 3 mm thick CRCA sheet, totally enclosed, weather, vermin and dust proof, front operated double door with locking arrangement and ventilator slots, cable trays, glands, lugs, etc. including provisions for taking out incoming and outgoing cables duly marked with riveted letter plates of appropriate size for each feeder cable, danger board, etc., suitable to accommodate and including the following mentioned fittings and painting with epoxy powder coated over a coat of red oxide zinc chromate primer complete with internal copper wiring and necessary foundation/ platform as per manufacturer's instructions all as specified and as directed.

Supplying, installing, testing and commissioning of LT Feeder pillar box, outdoor cubicle type, factory made, IP 54 protection class, KIOSK type, 415 volts, 50Hz, 3 phase, 4 wire system with 100 Amps current carrying capacity, made out of 3 mm thick CRCA sheet, totally enclosed, weather, vermin and dust proof, front operated double door with locking arrangement and ventilator slots, cable trays, glands, lugs, etc. including provisions for taking out incoming and outgoing cables duly marked with riveted letter plates of appropriate size for each feeder cable, danger board, etc., suitable to accommodate and including the following mentioned fittings and painting with epoxy powder coated over a coat of red oxide zinc chromate primer complete with internal copper wiring and necessary foundation/ platform as per manufacturer's instructions all as specified and as directed.

BROTECH

M/s. VIJAY ELECTRICALS