PROVN OF FURNITURE AND ADDN/ALTN TO OFFICE IN SANDIPANI TAC SD PH OF DSTSC TRG COMPLEX AND ADDN ALTN TO OFFICERS CAFETERIA IN BLDG NO P76 OF MILIT GIRINGAR PUNE 25

Amount

B/R PROTION ( ADDN/ALTN TO OFFICERS IN SANDIPANI AT MILIT ) M&L for Grinding & polishing of existing old Kota stone floor/skirting/staircase with sufficient number of grinding rounds and finally bees-wax polishing on surfaces of any descripion, width or girth including cleaning and preparation the existing surface complete all as directed by Engr-in-Charge.

S&F zebra venition blends with design on inner/outer face alternate blinds, folding type made out of fibre cloth fixed, to wall with necessary Aluminium brackets, screws etc. including Aluminium frame for venition blinds etc. all as approved by Engr-in-Charge and all as specified and directed. Make;- Vista, Levador or equivalent.

Demolition of cement concrete in floors and pavings n. exc. 15cm thickness (below or above ground level).

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick.

M&L vitrified ceramic tiles glazed coloured vetrified tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over 15mm thick screed bed in CM 1:6 .

S&F Rolled mild steel work as in trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including necessary cutting, welding complete all as specified and directed by Engr-in-Charge.

S&F of mineral fibre acoustic suspended ceiling system with prima fine fissured (SL2) tile with semi concealed grid , the tile should have humidity resistance (RH) of 99% , NRC upto 0.6, light reflectance> 87%, thermal conductivity K= 0.052 to 0.057 w/m, colour white fire performance class O/class 1 (BS476 part6 &7) in module sizeof 600x 600x16 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled content of 50%. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 3.50 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. the tile and grid system used together should carry a 15 year warantee. ( Make : armstrong, saint Gobain)

Dismantling valley gutters plain, corrugated steel sheeting of any gauge thickness including Nainital, pre-painted galvalume sheet or similar pattern roof covering including necessary carefully cutting to sheet by electric cutter as directed by Engr-in-charge complete.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, height upto 13mtr from floor level fixed with self tapping screws/'J' hook as directed by Engr-in-Charge and colour of sheet to be prior approval from GE.

S&F Steel rolling shutters thickness of laths 1.25mm MS sheet, with necessary ball bearing, as specified including top cover, anchoring rod, hasp and staple erected in position as indicated but gear operated type with bevel gear box and crank handle, complete including taking down old shutter all as per directed by Engr-in-Charge.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete.

S&F 1.25mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, including necessary cutting, welding and fixing at site upto height 15meter, including all necessary safety measures and scaffolding provided at site complete.

S&F angles (internal or external) or nozzle pieces (outlet) for 300mm to 600mm dia eaves gutters, half round with rounded edges including necessary cutting, welding and fixing and dismantling old angles complete.

S&F 1.25mm thick plain galvanised, mild steel sheet Drop ends (for spigot or socket ends) or nozzles for eaves gutters complete.

Taking down PVC Rainwater pipe/soil pipe including fittings any dia complete all as specified and directed.

S&F 150mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall, including necessary PVC clips complete.

S&F 150mm dia PVC SWR bends any radius complete.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete.

Rendering 15mm thick on brick or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth without using extra cement, complete all as specified.

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete over new or old plaster surfaces internally complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on New surfaces of wall complete.

M&L for two coats of oil bound distemper over a coat of primer on old surfaces of wall complete.

Excavating in post holes (or similar holes) each n.exc 0.50 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil.

S&F sturctural steel work as in frame work, cantilever, post, rail, purlin, rafter including special shaped washer etc. complete using ERW or induction butt welded circular/square/rectangular pipes including necessary cutting, welding complete all as specified and directed by Engr-in-Charge.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on new or old steel surfaces exc 10 cm width or girth etc.

Surface excavation n.exc 30cm deep and average 15cm and getting out in soft/loose soil.

M&L for Hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc.15cm thick including watering and ramming upto a true surface.

M&L for cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base 75mm thick complete.

M&L for sand cushioning below interlocking paver block complete.

M&L for Machine pressed glossy finished rubber moulded coloured precast cement concrete interlocking paver block with pigment and shape and size as approved, conforming to IS 15658-2006 of 60mm thick, M-35 Grade.

M&L for factory made kerb or mud stop rounded or champhered on edge with cement concrete type B1 (1:2:4), shape and size as approved complete.

Returning filling in, well watering ramming in layers not exceeding 15cm thick complete all as directed.

Removing of excavated soil to a distance not exc 50mtrs and depositingwhere directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed by Engr-in-charge.

S&F manual operated, ABS material wall mounted tissue paper dispenser, size 35.6cm x 26.7cm, colour white complete. Make :- Dolphy or equivalent.

S&F manual operated, ABS material wall mounted hand wash (soap/sanitizer) dispenser, capacity 1000ml complete. Make :- Dolphy or equivalent.

Special Items B&R S&F 12mm thick, prelaminated both side cement bonded particle board are to be of wood finish teak shade and 1st class hard wood (Teak wood beading all around on edging to board including painting to beading, conforming to IS-14276-1995, (Bison Panels by NCL group, member indian green building council). The composition of the boards comprises of approximately 60% Cement 30% plantation wood (remaining being other chemical/water binders etc.) with a density of approximately 1250-1300Kg/M3, including fixed with scews as in wall panelling, including necessary wooden frame work for wall panelling with 50mm x 25mm thick 2nd class wood including creosote paint to wooden frame work and fixed to wall with necessary screws for wall panelling, grooves in the joints to be covered with metal or plastic tee sections as in shelve, cupboards, wall panelling, cladding, etc. including screws and all screw finish with lambi etc. as per specifications.

M&L for 50mm size cupboard magnet including high quality magnet and steel plate.

S&F soft close full cover 35mm dia 110degree cupboard/cabinet hinges complete fixed to particle board/wooden frame work complete.

S&F Brass 4 levers locks for cupboard, grade I, size 50mm complete.

S&F 125mm brass cupboard handles, cast type, polished bright fixed with nut screws and washers complete all as specified and directed.

B/R PORTION 2 (ADDN/ALTN TO OFFICERS CAFETERIA IN BLDG NO P-76 OF MILIT) S&F Solid PVC Wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixed at site on PVC frame as per specifications and drawing.

5mm thick PVC sheet fillet of any size or of any shape for taking of PVC wall panelling all as per specification and directed by Engr-in-Charge.

M & L for granite 18mm thick black/red colour (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Taking down chowkats or frames of wooden or steel window not exc 1.5 sqm with Shutters (without taking off shutters from the frames).

S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F anodized aluminium powder coated of any colour (thickness of powder coating not less than 50 micron), in frame for door, partition wall etc. with one or more rebates, shutters, grills including joining cleat, glazing clips, rubber packing anodised aluminium snap for fixing glass, 12mm thick particle board etc. complete all as specified. (Jindal Section No 20048=0.942 Kg/M for door frame, Glazing Clip 19370=0.109 kG/M, Partiiton section 14066= 1.345 Kg/Rm).

S&F 12mm thick, prelaminated both side cement bonded particle board are to be of wood finish teak shade and conforming to IS-142-1995, (Bison Panels by NCL group, member indian green building council). The composition of the boards comprises of approximately 60% Cement 30% plantation wood (remaining being other chemical/water binders etc.) with a density of approximately 1250-1300Kg/M3, including fixed with scews to Aluminium frame work for doors, partitions, cabinets, cupboards, wall panelling, cladding etc. including screws and all screw finish with lambi etc. as per specifications. Note:- All Bison panels are fixing by self threaded machine screw, 25/38mm as per requirement. the system used together should carry a 10 years warrantee.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete in floors and pavings n. exc. 15cm thickness (below or above ground level).

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick.

M&L vitrified ceramic tiles glazed coloured vetrified tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over 15mm thick screed bed in CM 1:6 .

M&L for Non Skid Ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L Glazed ceramic coloured tiles in vertical surfaces 300 x 450 x 7mm as in dado/skirting etc. and joineted neat in cement slurry and pointed in white or colour cement to match over 10mm thick screed bed in CM 1:4 .

Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames).

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified, supplied and fixed size 105X60mm complete.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded aggregate) as in filling steel frames etc. incl necessary form work complete.

M&L for 30mm thick Flush shutters with lipping all around of solid core construction with block board core and ply wood face panels commercial type on both side complete.

M&L for brass, sliding door bolt with sand or die cast brass hasp, staple (bolt type) length 300mm fixing bolt with rolled or drawn brass bolts and fixed.

M&L for floor door stopper of brass body and tongue with hard drawn steel spring overall length of cover plate 140mm complete.

S&F 150mm long extruded brass handles, fabricated type polished complete.

S&F 200mm long brass barrel tower bolts, with cast or sheet barrel and rolled and cast bolts fixed.

S&F Door closer Aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed.

M&L for 0.9mm thick decorative laminate type1 of surface finish, colour and pattern as approved by Engr-in-charge, fixed with approved adhesive as per manufacturer's instructions.

M&L for Two coats of french polishing on old wood surfaces of any description, width or girth including cleaning and preparation the surface complete all as specified and directed by Engr-in-Charge.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

Rendering 15 mm thick of fair faces of stone wall surface in CM 1;6. finished even and smooth without using extra cement.

M&L for rendering 5mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement.

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete over new or old plaster surfaces internally complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on New surfaces of wall complete.

M&L for two coats of oil bound distemper over a coat of primer on New surfaces of ceiling complete.

M&L for two coats of oil bound distpemper over a coat of primer on old surfaces of wall complete

M&L for two coats of oil bound distemper over a coat of primer over 2mm thick coat of putty in two layers on old surfaces of ceiling including complete removal of existing treatment complete.

M&L for applying two coats of acrylic emulsion paint (luster paint) internally over a coat of acrylic primer over 2mm thick coat of waterproof putty in two layers on old or new surfaces of wall.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on steel surfaces exc 10 cm width or girth etc.

M& L for Silicon sealant for sealing of existing window aluminium frame with penetration depth 10 mm and 10 mm wide using sealant gun finished in triangular shape complete all as specified and as directed.

M&L for repair to old existing gypsum board/POP sagging false ceiling with necessary GI snap grid frame work including fastener to RCC roof including making good of ceiling suface with necessary POP work after fixing with existing false ceiling complete including taking down and refixing of gypsum board in two or three tier design of ceiling complete.

M&L for false ceiling with 10mm thick Gypsum board fixed with machine screws on GI channel 18 gauge thick, grid work main joist placed at 750mm centre secondary joist placed at 450mm centre, GI angle suspender from roof and treating the gypsum sheet with 2mm thick layer of POP with gypsum binder, sending the surface till smooth finish is obtained incl. preparation of surfaces and applying two coats of oil bound distemper over a coat of primer incl. dismantling of existing ceiling of any description and any thickness incl grid etc. all as specified and directed by Engr-in-Charge. Note :- Gypsum ceiling to be made in two/three tier design complete.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness including cover fillets.

S&F of mineral fibre acoustic suspended ceiling system with prima fine fissured (K2C2) tile with semi concealed grid , the tile should have humidity resistance (RH) of 99% , NRC upto 0.6, light reflectance> 83%, thermal conductivity K= 0.052 to 0.057 w/m, colour white fire performance class O/class 1 (BS476 part 6 &7) in module sizeof 600x 600x16 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled contentof 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. the tile and grid system used together should carry a 15 year warrantee. (Make : armstrong, saint Gobain)

S&F in repair Wash hand basin, vitrous china, coloured flat back of size 550 x 400mm encluding cutting for and pining in ends of brackets or erecting stand including brass waste coupling waste pipe, 15mm dia bore pillar taps, cast copper alloy chromium plated fancy type fixed.

S&F in repair fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed. Make Jaguar/Cera.

S&F in repairs Bib taps fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. Make Jaguar/Cera.

S & F stainless steel grating doom 125mm dia complete all as specified.

S&F Chromium Plated Auto closing concealed Urinal Flush valve with wall flange complete all as specified and as directed. Make - Jaguar/Cera

S&F Chromium Plated Toilet Paper Holder Make - Jaguar/Cera.

S&F Chromium Plated Towel rail 600mm long. Make - Jaguar/Cera.

S&F Chromium plated Glass shelf 600mm long Make - Jaguar/Cera.

S&F Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1mtr long flexible tube and wall hook complete all as specified and as directed. Make Jaguar/Cera.

S&F Chromium plated Jet Spray with CP connection pipe for EWC 15mm bore with fittings complete all as specified and directed. Make Jaguar/Cera.

S&F Chromium plated Bottle trap (with internal partition) 32mm size with 250mm & 190mm long wall connection pipes & wall flange complete all as specified and as directed. Make - Jaguar/Cera.

S&F in repair Urinal, Half stall type, white including urinal spreader of chromium plated, stainless steel tube fixed with 15mm dia pipe complete all as specified and as directed.

S&F for steel water tubes, 20mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floor, complete including taking up or down steel tubing and connections or removal to store all as specified & directed.

All as per item here in befor but 15mm

S&F vitreous china Anglo Indian Type WC with 'P' trap front and back inlet etc including connection to trap and to flushing pipe complete all as specified and as directed in repairs including demolition of existing one.

S&F PVC seat cover for Anglo Indian type pedestal pan,white colour closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

S&F 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection, PVC bend/flush pipe of reqd length complete all as specified.

Taking down PVC Rainwater pipe/soil pipe including fittings any dia complete all as specified and directed.

S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to floor, wall, including necessary clips complete.

M&L for PVC (SWR) waste and vent pipe 75mm bore in any length with rubber ring joint laid in floor or wall complete all all as specified.

S&F for PVC (SWR) floor trap dia 75mm with CP grating including jointing to waste pipe with and including run lead joint.

S&F Brass Hat pegs, solid body 125mm to 175mm complete all as specified and directed by Engr-in-Charge.

S&F 0.71 Plain, aluminium sheeting, alloy 31000H4 in wooden door straight flashing, ridges, hips, valley gutter, drip etc. fixed with screws complete all as specified and as directed.

E/M PORTION (Addition / Alteration to OFFRs Cafetaria in building no P-76at MILIT) Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all as specified and as directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.

Taking down carefully unserviceable DBs any type/size With MCBs etc and disconnecting and making good disturbed surfaces complete all as directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC casing capping fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxes including Modular box , modular cover plates with frame mounting for housing the switches, socket outlets etc, all as specified and directed . (a) One light point controlled by one way switch.

(b) One Fan point controlled by one way switch.

(c) One 3 pin switch socket outlet point 6 Amps on independent board.

(d) One 3 pin switch socket outlet point 6 Amps on same board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 16 amp independent, with cable 2.5 sqmm size.

S & Fix modular switch, single pole,one way 6 Amps capacity

S & Fix modular switch, single pole, one way 16 Amps capacity

S & Fix modular socket, outlet 2 in 1, 6 Amp capacity

S & Fix modular, socket 6A/16A 2 in1, 16 Amp capacity

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete.

S & Fix modular fan regulator electronic 2 modular type volts AC 50 HZ ,100 Watts, 4 step complete all as directed.

S & Fix LED Batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge. Make :- Bajaj Cat Part No - BLRB-DB 118 or eqvt in Wipro/Havell/Crompton.

S & Fix LED tube light rod 18 watts with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge. Make - Bajaj Cat Part No - BLRB 18W LED or eqvt in Wipro/Havell/Crompton.

S & Fix Batten for LED tube light fitting 10 W complete accessories all as specified and directed by Engr-in- charge Make:- Bajaj, Cat part no-BCLSB 10 WH or eqvt in Wipro/Havell/Crompton.

S & Fix sheet metal enclosure distribution board SPN 8 way 240 volts, 200 amp busbar rating with IP 43 protection and double door, suitable for mounting MCBs and all as specified and as directed.

S & Fix MCB single pole, 240 volts, 6 to 40 Amps, all as specified and as directed.

S & Fix MCB single pole & neutral, 240 volts, 6 to 40 Amps, all as specified and as directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC Casing caping fixed to walls / roofs / floors / ceiling etc with its accessories all as specified and directed by Engr-in -charge for the following. (a) 2x6 sq mm and 1x6 sq mm as earth wire

S & Fix fans ceiling complete with electronic type regulator and accessories 230 Volt, 1200 mm sweep. BEE 5 Star rated complete fixing arrangement all as directed by engr in charge.

S & Fix for ceiling fan down rods 1.0 M Long of 15 mm dia GI pipe to the existing trusses of any height including necessary welding & fixing with clamps and nut bolts etc complete all as specified and as directed.

S & Fix metal body Exhaust fan heavy duty AC single phase 230 volt 900 RPM, 50 Hz of size 380 mm sweep with louver and fixing arrangement complete all as specified & directed. Make : Havells Cat no - Turbo force or eqvt Bajaj / Usha.

S & Fix Wall mounted fan 400 mm sweep white colour, 230 volts, 55 Watts including fixing arrengenment on wall all as directed by engr in charge. Make- Havells or eqvt in Bajaj / Crompton.

E/M PORTION ( ADDN/ALTN TO OFFICERS IN SANDIPANI) Taking down carefully aluminium / copper point wiring complete (light, fan socket & power) including unserviceable fixtures and fittings such as switches ceilimg roses pendents regulators sockets light fittings etc complete removing material for taking credit & making good disturbed wall / floor etc complete all as directed by Engineer-in-Charge

Taking down sub main wiring complete including fitting and fixtures, removing materials for making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed.

M & L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through PVC concealed conduit fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including modular cover plates with frame and modular flush boxes for mounting for housing the switches, socket outlets, fan regulators etc, all as specified and directed . (a) One light point controlled by one switch.

(b) One Fan point controlled by one switch and one regulator.

(c) One 3 pin switch socket outlet point 6 Amps on independent board.

(d) One 3 pin switch socket outlet point 6 Amps on same board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.

S & Fix modular switch 1 way 6A, 1 module

S & Fix modular switch1 way 16A, 1 module

S & Fix modular socket out let 6A 2/3 on combined 2 module

S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module

S & Fix Ceiling rose surface backlite 65x50mm 3 terminals complete.

S&Fix fan regulator electronic 2 modular type volts AC 50 HZ ,300 Watts,4step complete all as directed.

S & Fix LED efficient LED recessed mounting fitting 2' X 2' luminaire to enhance the delight of occupents with comfortable experience through its classic design & glare free soft illumination all as specified & directed Make - Bajaj Cat Part No - BZRSQL 36L LED GX D WH SD or eqvt in Wipro/Havell/Crompton.

S & Fix LED Batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable 23/0.0076 from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge. Make :- Bajaj Cat Part No - BLRB DB 118 or eqvt in Wipro/Havell/Crompton.

S & Fix LED tube light rod 18 watts with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge. Make - Bajaj Cat Part No - BLRB 18W LED or eqvt in Wipro/Havell/Crompton.

Taking down and refixing of Ceiling fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer.

S & Fix sheet metal enclosure distribution board SPN, 12 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete.

S&Fix sheet metal enclosure distribution board SPN, 2 ways 240 volts, with 100 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete.

S & Fix of MCB single pole and neutral, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC casing and capping with its accessories all as specified and directed by Engr-in -charge for the following (a) 2x1.5 sq mm and 1x1.5sq mm as earth wire

(b) 2x6.0 sq mm and 1x6 sq mm as earth wire

S & Fix LED street light 30 W CUB type building security light pressure die cast aluminium housing LED street light lumaniries with IP 66 and complete all accessories and fixing arrengenment all as specified and directed by Engr-in-charge. Make - Bajaj Cat Part No - ENXT P 30L WH CR PC SD Havells Cat Part No -ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC / Crompton Cat Part No - LTRUMP0030XW or other.

S & Fix LAN socket connecter RJ 45 with socket with copper feed modular type all as directed by Eng in Chrage.

S & Fix LAN cable 4 pairs PVC insulated and PVC sheathed all as directed by Engr in Charge

Mehta and Co.

M/S P D TUPE