Provn of 04 x fire fighting electric moter pump, 48 x desert cooler and solar water heater system under GE Gurdaspur.

Amount

M&L for point wiring with 1.5 sqmm PVC instulated unsheathed single core stranded copper conductor FR 1100 volts cable along with 1.5 sqmm PVC insulated solid earth conductor cable drawn through and including 20mm dia rigid PVC conduit and accessories fixed on wall / surface and steel terminal box 14 SWG pressessed concealed in walls complete with 3mm thick laminated sheet cover all as specified

Supply anf fixing modular switch 1 way, 1 modular 6 amps single pole one way all as specified and directed.

Supply and fixing modular socket, 2 module 6A 2/3 pin all as specified and directed.

S&F modular white cover plate with frame, 3 module all as specified and directed.

S&F modular matel flush box,3 module all as specified and directed.

Supply and fix PVC connection 15 mm dia PTMT nuts of lenth 450 mm .

Supply and fixing stop valve cost copper alloy 15 mm dia screwed down high pressure bwith crutch or butter fly handle secrewed both end for iron pipe

Supply and fix GI pipe 20mm dia medium grade with all fittings and fixed complete to wall and ceiling including drill hole on wall for in coming and out going pipe.

S & F Stands for desert cooler made of angle iron 50x50x6mm in sige including bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot , drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finsishing coat of paint all as specified and directed.

Supply, installation, commissioning and testing at roof top of building (Double storeyed) "Solar hot water (Heat exchanger type) system" (flat plate collectors) ISI marked based on indirect transfer of heat of capacity 300 Ltrs per day (at Temp 60°C to 80°C) confirming to IS 12933-2003 Part-I having insulation of rock wool/mineral wool 50mm thickness bottom and 25mm thickness on with toughened tempered glass of 4mm thick and cladding with aluminium sheet 26 SWG complete with copper riser tubes, copper heater tubes, copper sheet and absorber with 40x40x6mm enameled coated MS angle Iron structure with accessories fasteners etc duly grouted in PCC 1:2:4 type B-1 (30cmx30cmx30cm block) with hot water storage tank of capacity 300 ltrs with inner shell fabricated from stainless steel 1mm thick in cylinderical shape and outer cover fabricated from aluminium sheet 1mm thick (having insulation of rock wool) mineral wool 100mm thick & cladding with aluminium 26SWG with necessary electric back up of capacity as per manufacturer's recommendation with heat exchanger in hot water tank with necessary make up tank of stainless steel 01 No float valve20mm dia of brass to maintain water in collectors and heat exchanger necessary piping between collectors and hot water tank, PVC cold water tank(three layers) ISI marked (Make :- Sintex) of capacity 1000 ltrs fixed over hot water tank on MS angle iron 50x50x6mm including nuts, bolts, grouted in PCC 1:2:4 type B-1 blocks (30cmx30cmx30cm) & two coats of painting over a coat of red oxide with temperature gauge (100°C) brass gate wall in hot & cold water pipes complete all as specified and as directed. Note : (i) Cost of PVC tank , Cold and hot water pipe with their fittings, cable and water taps shall be measured and paid for separately. (ii) MS Angle structure shall be preared as per manufacturer's instructions Make: TATA BP Solar,Recold, Supreme.

Supply and laying galvanised GI pipes medium grade 25 mm dia ISI marked with necessary fittings such as Tee , elbows, bend, reducers, unions etc fixed on walls, floors roof or in trenches etc. Make Jindal,TATA,Oswal.

Supply and laying galvanised GI pipes medium grade 20 mm dia ISI marked with necessary fittings such as Tee , elbows, bend, reducers, unions etc fixed on walls, floors roof or in trenches etc. Make Jindal,TATA,Oswal.

Supply and laying galvanised GI pipes medium grade 15 mm dia ISI marked with necessary fittings such as Tee , elbows, bend, reducers, unions etc fixed on walls, floors roof or in trenches etc. Make Jindal,TATA,Oswal.

Supply and fixing bib cock brass chromium plated alloy with crutch or butterfly handle screwed down suitable for15mm die ISI marked all as directed.

S&F sub main wiring copper conductor alongwith earth wire including concealed PVC Rigid conduit pipe of 25 mm dia copper cable 2x4 sqmm + 1x4 sqmm for earth wire.

Supply & laying XLPE insulated armoured heavy duty electric cable with aluninium conductor 1100 volt grade cross section area 2 core 16 sqmm . Make Plaza, Havells,Glostor.

Cutting existing steel tubing 40 to 100 mm dia for alterations or additions including insertion of T ,socket ,bend and threading for complete the job in all respect.

Supply and fix gun metal, globe or gate valves, with iron wheel head, screwed both ends ISI marked suitable for 25 mm dia iron pipe.

Supply and fix gun-metal, globe or gate valves, with iron wheel head, screwed both ends ISI marked suitable for 20 mm dia iron pipe.

S&F distribution board SPN 4 ways including bus bar 200 Amps double door shutter and comprising of the following :- (a ) SPN MCB 32 Amp (in coming) = 01 (b) MCB sp 20 Amp (Out going) = 02 (c) Blinking plate = 01

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 3 meter below ground level with top edge of the earth plate at a depth not less than 2.25 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common saft filling in alternate layers and electrode connection by using earth lead GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron light grade pipe 15mm bore in wall/floor/and GI pipe 20mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 5 of SSR 2020 (Part-I).

S&F Cross armas , 65mm x 65mm x 6 mm thick bracings, supports , clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot , drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint .

S & F hot water pipe duly insulated with glass wool and aluminium cladding 15 mm bore

All as per Srl item No 25 above but 20 mm bore

Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers each n.exc 25 cm thick in soft/ loose soil all as specified.

Removal of excavated soil to a distance not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand cushioning trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified

Supply and lay brick common burnt sub class ‘B’ old size and for protection of cable laid in trenches for under ground cable all as specified.

Supply and fixing in replacement of sintex tank 500 ltr complete all as specified and directed.

Supply and install fire booster pumps for 440 volt, 3 phase, 50 HZ confirming to IS :12469 : 1988 with CI casing bronze impeller and stainless steel shaft mounted on heavy duty beaqrings suitable for 440 volts, 3 phase 50 Hz 10m head and 450 LPM discharge all as directed by Engineer-in-Charge. Note :- (a) The pumps to be mounted on C Channels of size 100 x 50 x 6mm. (b) Wheel axle of squce bar 65 x 65mm to provide. (c) Shocker arrangement with four iron wheel to be provided as per site and as per directed by Engineer-in-Charge. (d) Mud guard on four wheel to provide. (e) Suitable towing arrangement as per the weight of the pump to be provided.

Supply and laying of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire, armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 35 sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

M&L for cable protection GI tubing light grade fixed long the pole/under road/along the wall of size 80mm bore with necessary clamps all as directed.

M&L for road cutting including excavation returning filling in, spreading levelling, well ramming in layers, soiling with broken boulders stones, WBM 7.5 cm thick coarse aggregate received from dismentling the existing road, premix , carpeting 25mm thick using ready mate material, rolled and compaceted for road patch repair work , section/ cress section area of cutting complete all as specified and directed.

Supply & fix hose 63mm dia 15 meter long hose confirming to IS 636 complete with mate and female couplig conforming to IS 903 complete all as specified and directed.

Supply and fix 63mm dia gun metal branch pipe with 12.5 mm nozel confirming to IS 903 complete all as specified and directed by Engineer-in-Charge.

Supply and fix lowering pipe of dia 100mm HDPE heavy duty including fixing arrangements at the incoming of the pumps upto the water tank bottom level complete all as specified and directed.

Earthing Complete with galvanised steel earth plate electrode 60cm x 60cm x6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common saft filling in alternate layers and electrode connection by using earth strip using 25x 4mm galvaised MS strip by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron light grade pipe 15mm bore in wall/floor/and GI Pipe 20mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 5 of SSR 2009( Part-I).

M/S SHRI RAM BUILDERS

INDERJIT SINGH

ADVAIT CONSTRUCTION CO

BUILDEX CONSTRUCTION CO

D S INFRASTRUCTURE AND DEVELOPERS

M/S SATPAL AND BROTHERS

M/S DUGGAL CONSTRUCTION CO