PROVISION OF OUT DOOR TRAINING AREA AND STORAGE INFRA AT CME PUNE

Amount

SCH 'A' PART-I: BUILDING/STRUCTURES Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

Construction of Block of Control Tower complete all as shown in drawings and as specified.

Construction of Block of Watch Tower complete all as shown in drawings and as specified.

M&L for LLDPE Septic tank of capacity 1000 Litres (Black colour) to carry sewage and sludge water including all necessary fixing arrangements as per manufacturer's instructions and complete all as directed. Makes: Syntex/ Supreme/ Aquatech / United

Construction of Soakage well of size 3.60 m dia and 3.00 m effective depth all as shown in drawing No. CEPZ/2019/TD/03 sheet 1/2 & 2/2 and as specified.

Total amount of Sch 'A' Part-II (Pedestal and Connecting Passage)

Total amount of Sch 'A' Part-III (Addition/Alteration to Existing Building)

Total amount of Sch 'A' Part-IV (Internal Water Supply)

Total amount of Sch 'A' Part-V (Internal Electrification)

Total amount of Sch 'A' Part-VI (Road, Path and Hardstanding)

Total amount of Sch 'A' Part-VII (Culverts and Retaining Wall)

Total amount of Sch 'A' Part-VIII (Fencing and Gates)

Total amount of Sch 'A' Part-IX (Area Drainage)

Total amount of Sch 'A' Part-X (Sewage Disposal)

Total amount of Sch 'A' Part-XI (External Water Supply)

Total amount of Sch 'A' Part-XII (External Electrification)

Total amount of Sch 'A' Part-XIII (Site Clearance, Excavation and Earthwork)

NOTE: Schedule ‘A’ Part II to XIII items which are not Prepriced by MES are given in Sch 'A' Part-XIV, Bidders shall insert their rate in Column-6 only and the Estimated rate indicated as "0.0" are for that purpose.

SCHEDULE 'A' PART-XIV (MISC B/R AND E/M WORKS)

M&L AAC block masonry, straight or curved on plan exc. 6 meter mean radius, built in cement mortar 1:6, in any position, complete all as specified and directed.

M&L Forming construction joint 50mm deep and 10 mm wide in concrete slab or floor 100mm thick; joints filled with bitumastic filling in proportion of bitumen and sand as 1:2 respectively commplete all as specified and directed.

M&L Preperation of new or old black top surfaces and painting lines, dashes, letters, arrow etc. exceeding 10cm width or girth on road pavement and the like with 2 mm thick thermoplastic road marking paint white or golden yellow with glass retroreflective beads, the paint shall be applied mechanically with thermoplastic applicator machine all as per manufacturer's instruction and all as specified and directed.

Supplying, installing, connecting, testing and commissioning Hi wall Split AC unit electric driven of capacity 1.50 TR, 220 volts, 50 Hz, complete with cordless remote control unit and built in air ioniser and plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 based on and including eco friendly gas R-134A including connecting lead and suitable 3 pin plug top and factory made wall mounted stand for outdoor unit complete all as specified and directed. (Makes as per Appendix 'C').

S&F Voltage stablizers for automatic operation,single phase naturally air cooled type and designed for input variation between 170V to 250v with output voltage at 230v with accuracy of +/- 2.5% and of capacity 4.0 KVA. (Makes as per Appendix 'C').

S&F LED lights fitting 1 x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose. complete all as specified and directed. (Makes: Philips Cat No. BN021C LED22S PSUCWGR / Havells Cat Part No. LUMILINEPLUSNEO BS22WLED 865SPCSSIND / Benlo Cat Part No. BL04BAT 22WT5 / Halonix Cat PArt No. HLB-03-22-CW-AL-SQ)

S&F LED flood light fittings 180 watt suitable to fix on high mast pole with secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion and IP 66 protection, 4 kV inbuilt and 10 kV external surge protection with high luminous efficacy 110 lm/w and connecting up with 3 core copper conductor cable of suitable size and length upto control panel of high mast complete all as specified and directed. (Make: Bajaj Model PRAIE 216L WH NB-A5 TG SD / Havells Cat Part No. JETAIRISMAXFL 180W LED PWBLTG / Halonix Cat Part No. HLFLD-ML15-180-CWL-R-HL2-P).

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete. (Make: Havells Cat Part No. PETAL 2X2 PLR36WLAD 830S / Bajaj Cat Part No. BPRA36WWHSLLED / Halonix Cat Part No. HLFPR22-11-36-CW-37mm).

Supply and fixing Ceiling fan complete with fan blades, down rods, stepped type double module electronic regulator and accessories , 230 Volts 1400 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC), complete all as specified and directed of makes as specified in Appendix 'C').

Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1325, Copper winding, of size 250 mm sweep with blades and frame, complete all as specified and directed. (Make: Bajaj Model No. Maxima DXI 250mm or equivalent model in makes as per Appendix 'C').

S&F 70/72 watt new generation energy saving and enviromental friendly long life LED street light fitting made up of pressure die cast aluminium housing with IP 66 ingress protection with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment and impact resistance of IK08 with 4 KV in built and 10 KV external surge protection device, high / low voltage cut off, open / short circuit protection and high power factor including fittings and connecting new street light on pole bracket with PVC insulated cable with copper conductor 1.5 Sqmm 3 core drawn through pole from pole junction box to street light fitting complete all as specified an directed. (Make: Bajaj Model Zela P 86L WH PO TG SD / Halonix Cat Part No. HLSLD-ML04-72-CWL-HL2-P / Havells Cat Part No. ENDURAOMNIPLUS SL72W LED 757 SASYTOPC).

S&F Street light brackets made out of 32 mm dia GI light grade pipe duly bend by hot forging after filling of sand of length 1.00 metre including two pairs of MS flat iron strip 30 mm x 5 mm clamp of suitable size with necessary GI nuts, bolts - 02 Nos with flat washers 3 mm thick - 2 Nos including painting with aluminium paint over one coat of red oxide primer to the MS claps and bracket etc. complete and fixing on walls / poles complete all as specified and directed.

S&F Street light brackets made out of 40 mm dia GI light grade pipe duly bend by hot forging after filling of sand of length 1.50 metre including two pairs of MS flat iron strip 40 mm x 5 mm clamp of suitable size and shape to fix on pole with necessary GI nuts, bolts 75 mm long 12 mm dia - 02 Nos with flat washers 3 mm thick - 2 Nos including painting with aluminium paint over one coat of red oxide primer to the MS claps and bracket etc. complete and fixing on walls / poles complete all as specified and directed.

S&F Pole junction box sheet moulded compound (SMC) type with hinged door and locking arrangement of size 300 x 200 x 105 mm (internal) comprising 01 No MCB single pole of capacity 6 Amp 240 Volts and one number heavy duty connector block of polycarbonate body with 4 terminals for loop in & loop out suitable for threee phase street light system including nuts and bolts and connecting up complete with MS clap fabricated from 25 x 3 mmm flat iron, nuts, bolts and washers etc. complete all as specified and directed.

S&F New generation LED Post-top latern, energy saving, envoronmental friendly, long life asthetically designed with symetrical light distribution, spun aluminium landscape luminaire with IP-65 protection with and including 20 Watt LED as light source, complete all as specified and directed. (Make: Bajaj Model BGCTNP 20W LED WH / Halonix Cat Part No. HLPT-S04-20-CW / Havells Cat Part No. RUBY PT25W LED 757 SSYMTOPC).

S&F New generation LED Building security light fitting 20 Watt, energy saving, envoronmental friendly, long life made up of pressure die cast aluminium housing with high efficiency LED as light source and IPC cover having seperate driver compartment with IP 66 protection, 4 kV inbuilt surge protection complete all as specified and directed. (Make: Bajaj Model ENXT P 24L WH CR PC SD 20W / Halonix Cat Part No. HLSLD-14CWDL-R / Havells Cat Part No. ENDURASUNDOWN SL 25W LED765 PASYBOPCIHD).

M&L for raising and lowering type 15m height, high mast light system, hot dip galvanized inside and outside suitable for 8 lantern symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch (i.e. motorised and manual) with galvanized luminaire mounting arm, pully assembly, aviation obstruction light, lightning arrester spike including RCC foundation as per height., erected, tested and comissioned and including electric control panel with astro type time switch provided with 250mA fuse unit externally ath the input and contactor ML 1.5, 3 pole with coil voltage 230 AC for automatic switching on / off of the luminaires complete all as specified and directed.

Supply, installation, testing and commissioning outdoor cubical feeder pillar box / LT Panel, CPRI approved suitable for 3 phase 4 wire 415 volts 50 Hz system and size not less than 1.5 m x 1.5 m x 0.5 m powder coated weather, dust and vermin proof, factory fabricated, totally enclosed, front & rear opening doors type, IP-54 class protection, made out of 3.00 mm thick CRCA sheet metal outer and 2 mm thick for inner compartments conforming to IS: 8623, panel shall be of suitable size for housing bus bars, LT switchgears and measuring instruments, frame made out of MS angle iron frame made out of 50x50x6 mm cut to size, welded, bent to shape, cubical fabricated truly to box type, hinged panel board opening handles, locking arrangements, provided with sufficient circular holes at the bottom sheet for entry of plated cable glands and aluminium lugs suitable for incoming and outgoing cables, provided with PVC rubber bushes to spare holes, including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 volts grade IS 694 marked or PVC sleeved copper strips of appropriate sizes but not less than 2.50 Sqmm, including provision of PCC platform and grouting panel legs in PCC block so that the bottom of panel shall be at minimum 45 cm above ground level and 45 cm embedded in concrete, all accessires prewired complete with danger notice board with and including the following controls and accessories:-

(a) Aluminium bus bar 150 Amp capacity for Phase-R-Y-B and 150 Amps for neutral mounted on epoxy based insulator installed with coloured sleeves - 01 Set (3 Phase and 1 neutral)

(b) Incoming - 4 Pole MCCB 63 Amp, 50 Hz, 415 volt with rupturing capacity 25 KA with adjustable thermal and magnetic settings inclding connection with bus bar lcs=100% lcu- 01 No

(c) Outgoing- MCB TPN 10 KA rupturing capacity 16 Amp rating including connection with busbar = 05 Nos. (Outgoing for street light - 1 No. Control Tower - 01 No, High Mast 1 & 2 - 2 Nos and Spare -1)

(d) MCB SPN 10 KA rupturing capacity 10 Amp including connection with bus bar = 05 Nos (Outgoing for surce point circuits - 4 Nos, Spare- 1 No)

(f) LED phase indicator of Red, Yellow and Blue with back up HRC fuse = 01 Set of 03 lamps

(h) Automatic street light ON/OFF astro type time switch provided with 250mA fuse unit externally ath the input and contactor ML 1.5, 3 pole with coil voltage 230 AC fitted inside steel enclosure = 01 No

(j) Panel wiring with suitable capacity of copper conductor cables of 1100 V grade.

(k) PCC foundation 1:3:6 type C-1 of suitable size as directed by Engineer-in-Charge.

NOTES:

(i) Panel shall be manufactured by the reputed manufacturer who is possession of type test certificate by CPRI not older than ten years.

(ii) Rate quoted shall be inclusive of complete excavation and earthwork in any kind of soil as per site requirement.

Supply, installation, testing and commissioning outdoor cubical feeder pillar box / LT Panel suitable for 3 phase 4 wire 415 volts 50 Hz system, powder coated weather, dust and vermin proof, factory fabricated, totally enclosed, front & rear opening doors type, IP-54 class protection, made out of 3.00 mm thick CRCA sheet metal outer and 2 mm thick for inner compartments conforming to IS: 8623, panel shall be of suitable size for housing LT switchgears and swich sockets, frame made out of MS angle iron frame made out of 30x30x4 mm cut to size, welded, bent to shape, cubical fabricated truly to box type, hinged panel board opening handles, locking arrangements, provided with sufficient circular holes at the bottom sheet for entry of plated cable glands and aluminium lugs suitable for incoming and outgoing cables, provided with PVC rubber bushes to spare holes, including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 volts grade IS 694 marked or PVC sleeved copper strips of appropriate sizes but not less than 2.50 Sqmm, including provision of PCC platform and grouting panel legs in PCC block so that the bottom of panel shall be at minimum 45 cm above ground level and 45 cm embedded in concrete, all accessires prewired complete with danger notice board with and including the following controls and accessories:-

(a) Incoming - MCB 10 Amp, 50 Hz, 240 volt with rupturing capacity 10 KA - 01 No

(c) Outgoing- Switch socket combination 5 Amp enclosed and fixed into panel - 03 Nos (one standby).

Saiprabha Construction

K R TRADERS

United Sales Corporation

surendra infrastructure pvt ltd

M/s S. R. Constructions