WELCOME MAINT AND CERTAIN MISC B/R AND E/M WORKS MD ACCN AT MIL STN BD BARI UNDER GE KALUCHAK

Amount

Taking down chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.50 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 sqm & not exceeding 4 sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sq.m and not exceeding 2 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and not exceeding 2 sqm each and refixing in same opening after repair complete all as specified and as directed.

Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, keys , hinges lock, lock strike plate etc.made out of 1.25mm thick MS sheet including one shop coat of red oxide zinc chrome primer etc complete all as specified and as directed.

PCC 1:3:6 type C - 1 (using 20 mm graded crushed stone aggregate) as in back filling of chowkats and bed blocks for hold fasts etc complete all as specified and as directed.

30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with partical board complete all as specified and as directed.

2nd Class hard wood 35mm thick factory made glazed and skelton shutters open rebated and prepared to receive glass , gauze,etc (without sash bars) edges of framing plain , chamfered or rounded. Fitted with cut and mitred beads for securing wiremesh supplied and fitted to chowkats complete all as specified and as directed.

Solid PVC door/cup board frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified and as directed.

Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and as directed.

Anodised aluminium with powder coating of any colour ( Not less than 50 Micron)frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Anodised aluminium with powder coating of any colour ( Not less than 50 Micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Anodised aluminium with powder coating of any colour ( Not less than 50 Micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Aluminium anodised powder coated (minimum thickness 50 micron) designer grill of 5-6 mm dia of mesh size 50x50mm centre to centre with 25 mm flat inclusing aluminium beading , complete all as specified and as directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with 2nd class soft wooden beadings complete all as specified and as directed.

Butt Hinges medium weight cold rolled mild steel of size 100 mm complete all as specified and as directed.

150 mm size mild aluminium handles cast type anodised complete all as specified and as directed.

300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10 mm dia. 100 mm Size complete all as specified and as directed.

300 mm size Mild steel stove enamelled helical door spring fixed to Pressed steel frame / chowkhats including necessary welding complete all as specified and as directed.

18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in cupboards , kitchen cabinat etc fixed in repairs complete all as specified and as directed.

Block boards 18/19mm thick, grade 2 quality , interior grade , commercial type fixed with screws to timber frame work as in cupboards fixed in repairs complete all as specified and as directed.

Continuous (piano) hinges 30 mm wide flaps , mild steel bright finish or electrogalvanised as in cup boards, kitchen cabinat , etc complete all as specified and as directed.

40mm dia , Cupboard knobs fixed with nut , screw and washer of mild steel , bright finished complete all as specified and as directed.

Hasp and staple 100 mm safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed.

Sheet glass 3mm thick ordinary quality and glazing with oil putty in square n/exc 0.5 Sqm each pane complete all as specified and as directed.

3mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.5 sqm each complete all as specified and as directed..

5.5 mm thick Sheet glass tinted and glazing with glazing clip, rubber packing etc complete in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Factory made box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube with double side shutters (Wire Gauged shutter and Glazed Shutter), side hung shutters with MS handles and MS stays dovetailed or welded including 02 nos MS Tower Bolt 150mm long for each leaf, 8 mm square guard bars at spacing as shown in drawings, MS flat iron frame work, MS hinges, tarred hold fast, PCC 1:2:4 type B1 as in bed of hold fast, 01 No. per leaf of stopper of 100mm size, one coat of red oxide zinc chrome primer etc, complete all as specified and shown as drawing No. CEPZ/TD-354/09 sheet 1/3 to 3/3. Note : a). Wire cloth and Sheet glass shall be measured and paid seprately under respective items. b). Rate of both type of shutters is inclusive in the quoted rate.

Steel ventilator with top hung shutter including hinges , steel peg stay including taking down old steel ventilator of any size complete all as specified and as directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins , arches, pillar etc but excluding ashlars facing dressed stone work and pre-cast concrete article complete all as specified and as directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius and built in cement mortar 1:6 all complete all as specified and as directed.

Brick work with sub class ‘B’ bricks ,straight or curved on plan exc 6 m mean radius and built in cement mortar 1:6 complete , but except bricks , i.e using serviceable bricks obtained from demolition complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

75 mm thick PCC 1:3:6 type C-1, (using 20mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement incl necessary joints complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B-0 (using 12.50mmgraded crushed stone aggregate) as in sub- base finished even and fair to receive tiles complete all as specified and as directed.

Dismantling floor, hearth or wall tiling , terrazzo topping on walls including cement mortar , bedding (but no backing) removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

Non - skid ceramic coloured jointless tile 400mm x 400mm x 7mm thick as in floors laid over alongwith skirting and including 15 mm thick screed bed or bedding layer of cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete all as specified and as directed.

Non - skid ceramic coloured jointless tiles 400mm x 400mm x 7 mm thick on vertical surfaces such as skirting /dado etc bedded & jointed in neat cement slurry over and including 10 mm thick backing coat of cement mortar 1:4 and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed.

Vitrified coloured tiles, jointless , light shade of size 600mm x 600mm x 9 to 10 mm thick, as in floors etc bedded & jointed in neat cement slurry over and including 15 mm thick screed bed in cement mortar 1:4 and pointed in white or coloured cement to match the colour of tiles, complete all as specified and as directed.

Vitrified coloured tiles,joint less , light shade 600mm x 600mm x 9 to 10mm thick, on vertical surfaces such as skirting / dado etc bedded & jointed in neat cement slurry over and including 10mm thick backing coat of cement mortar 1:4 and pointed in white or coloured cement to match the colour of tiles, complete all as specified and as directed.

Glazed ceramic coloured tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

18-20mm thick black Granite stone machine cut (as per sample kept in GE's office), laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4, jointed in grey cement with addmixture of pigment to match the shade of granite stone including cutting, polishing and half rounding of exposed edge of stone complete all as specified and as directed.

Demolition of cement concrete in and paving (un reinforced) n exc. 15 cm. thickness, below or above ground level, including removal of waste from defence land and dumping at a place as specified by civil authorities complete all as specified and as directed.

75 mm thick PCC 1:4:8 type D-2 using (40mm graded crushed stone aggregate ) as in sub base of floor complete all as specified and as directed.

Precast designer coloured heavy duty full body paving tiles (factory made) of size 300mmx300mm x 10mm, top layer glazed made in any type of cement and pigment, in required patterns as approved by GE in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified and as directed.

Glass fibre reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent). Base coat: Berger HS Latex plus (or equivalent) Consumption base coat: 0.3 kg/m2 Reinforcement: Glass fiber Second and Third coat: Latex sheild 2K (or equivalent) Consumption top coat: 3 kg/m2 System requirements: density: 2.00 kg/ltr; compressive strength: 0.5 N/mm2. • Wall penetration through the RCC slab must be sealed using Berger HS RepirO(or equivalent). • Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus(or equivalent) modified mortar with a bonding coat of Berger HS Latexplus(or equivalent) modified cement slurry upto 5ft. • All depressions, unevenness, surface honeycombing shall be repaired using Berger HS Latex plus(or equivalent) modified polymer mortar with a bonding coat of Berger HS latex plus(or equivalent)modified cement slurry. Including cleaning of RCC surface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound tobe finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral water proofing compound liquid complete all as specified and as directed.

20mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spout pipes to pour out residual water out from the treated area complete all as specified and as directed.

Hard core, of broken bricks broken to gauge n exc 63mm for laying sub base of thickness 150mm complete all as specified and as directed.

Cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete in sub base complete all as specified and as directed.

25mm thick PCC (1:2:4) type B1 with 20mm graded aggregate for laying floor tiles complete all as specified and as directed.

Non skid coloured Ceramic tiles 8 to 10 mm thick in light shade (square/ rectangular) polished, area of each tiles exc 0.11 sqm but not exceeding 0.18 sqm, in floors/Skirting etc. set, jointed and pointed with Berger HS tile adhesive anti slip white @1.2kg/sqm thickness upto 8 to 10mm (or equivalent) and epoxy material for sealing of tile joints with Berger HS Epoxy tile grout(or equivalent) to the floor of toilets and bathroom complete all as specified and as directed.

Demolition of cement concrete in and paving (un reinforced) exc. 15 cm. thickness, below or above ground level, including removal of waste from defence land and dumping at a place as specified by civil authorities complete all as specified and as directed.

Machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in cement mortar ( 1:4) as in floor finished rough including applying a coat of cement slurry @ 03 Kg/Sqm of surface complete all as specified and as directed.

Machine cut kota stone 18-20mm thick in skirting, dado ,riser and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick rendering in cement mortar ( 1:4) including taking out of existing dado complete all as specified and as directed.

Taking down cement plaster on bricks or stone wall / ceiling decayed surfaces of concrete , roof projections or chajjas etc upto triple storey including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 15mm thick fair faces of brick / concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cement with WPC (WPC tobe measured separately) complete all as specified and as directed.

Rendering 10mm thick on fair face of brick / concrete surfaces in cement mortar 1:6 finished even and smoth without using extra cement complete all as specified and as directed.

Rendering 5 mm thick on concrete surfaces of ceilings in cm 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling water tanks of any description 1000 Ltrs capacity complete all as specified and as directed.

Dismantling water tanks of any description 500 Ltrs capacity complete all as specified and as directed.

Rotational moulded polyethlene water storage tanks , triple layered, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including over flow , drain out pipe and all accessories complete all as specified and as directed.

Rotational moulded polyethlene water storage tanks , triple layered, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres including over flow , drain out pipe and all accessories complete all as specified and as directed.

Supply and fixing in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe minimum weight 210 gms complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning, threading for prefixing or removal complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for prefixing or removal complete all as specified and as directed.

Steel tubing medium grade galvanised of 20mm bore with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Steel tubing medium grade galvanised of 15 mm bore with all fitting and fixed complete to walls and ceiling or laid in floors. complete all as specified and as directed.

Refixing old galvanised steel tubing of 20 mm bore and connections in new or old position with all fittings fixed complete to walls , ceiling, or laid in floors etc. complete all as specified and as directed.

Refixing old galvanised steel tubing of 15 mm bore and connections in new or old position with all fittings fixed complete to walls , ceiling, or laid in floors etc. complete all as specified and as directed.

Stop cock 20 mm cast cooper alloy of screwed down high pressure with crutch or butter fly handle , screwed with ends for iron pipe or unions fixed in repairs. complete all as specified and as directed.

Bib taps 15mm dia cast copper alloy fancy type chromium plated, screwed down for iron pipe or for brass ferrule fixed in repair complete all as specified and as directed.

WHB Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

Wall mixer, 3 in 1 system over head shower chromium plated fancy type, 15 mm bore complete all as specified and as directed.

Angle valve 15 mm fancy type, chromium plated 15 mm of cast copper alloy, screwed down for iron pipe complete all as specified and as directed.

Shower rose of C.P. swival joint of size 125mm for fixing 15mm pipe including fixing to steel pipe or unionall complete all as specified and as directed.

PVC connections 15mm dia & 600mm long with PTMT nuts complete all as specified and as directed.

Vitreous china wash down water closet (pedestal pattern) coloured complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, including seat cover fixed in repair, complete all as specified and as directed.

Vitreous china squatting pan 'Orissa' pattern long pan size 580 x440 mm white with integral foot rests (excluding cistern and flush pipe), fixed in repair, complete all as specified and as directed.

Low level flushing cidtern PVC valveles ,syphonic action type flushing cistern white with inlet valve,float and handle including bracket etc complete all as specified and as directed.

Glass corner shelf (3 piecs) for bathroom wall mounted type made of 5.50 mm thick sheet glass with 12 mm wide chromium plated bracket guard complete all as specified and as directed.

CP jet spray including CP flexible pipe for EWC complete all as specified and as directed.

Chromium plated health faucet including CP flexible pipe for EWC complete all as specified and as directed.

Chromium plated two way bib tap with health fauchet of length 1.00 mtr complete all as specified and as directed.

Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) complete all as specified and as directed.

Ball brass valves, high pressure, with polythene float and flynut complete, of bore 15mm dia screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Ball brass valves, high pressure, with polythene float and flynut complete, of bore 20mm dia screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Vitreous china wash basin white corner type of size 325x325 mm excluding taps waste chain and plug and porcelain stopper but including brackets, complete all as specified and as directed.

Vitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets, fixed in repair, complete all as specified and as directed.

CP jet spray including CP flexible pipe for EWC complete all as specified and as directed.

One piece WC with inbuilt jetspray and flushing cistern as integrated unit in a sleek design complete all as specified and as directed.

Tubular towel rail, brass chromium plated, 20 mm dia, D type, 60 cm long between Hangs, fixed in repairs complete all as specified and as directed.

Aluminium anodised tubular curtain rail 20mm dia with bracket and dome complete all as specified and as directed.

PVC (SWR) floor trap , plain with grating including jointing with solvent cement of 75mm outlet dia complete all as specified and as directed.

Dismantling cast iron or reinforced concrete drain pipes of 75/100mm bore, fixed with walls and taking out of trenches, if required complete all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall including fixing clamps complete all as specified and as directed.

PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

PVC (SWR) branch piece, (single Y) equal or unequal 110mm bore complete all as specified and as directed.

PVC (SWR) junction single (single T) equal or unequal 110mm bore complete all as specified and as directed.

PVC(SWR) vent cowl 110 mm bore complete all as specified and as directed.

PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall including fixing clamps complete all as specified and as directed.

PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

PVC (SWR) branch piece, (single Y) equal or unequal 75mm bore complete all as specified and as directed.

PVC (SWR) junction single (single T) equal or unequal 75mm bore complete all as specified and as directed.

Demolition of reinforced cement concrete ( reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Use & waste Formwork for rough finished surface of concrete slabs ,shelves slabs etc complete all as specified and as directed.

Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

Reinforced cement concrete type B0 1:2:4 (20 mm graded aggregate) for slabs for shelves and similar works complete all as specified and as directed.

Kitchen sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

RCC chajja/fascia/parapet repair by using following steps :- (a) Removal of existing concrete along with loose damaged and cracked concrete/cover concrete from chajjas etc, exposing corroded steel reinforcements upto a depth of 10mm minimum behind the reinforcement by chipping/hacking with chisel and hammer or by mechanical means like chisel hammer, pneumatic chippers including high pressure water jetting to chipped concrete and reinforcement all as directed by Engineer-in-charge. Hard concrete shall not be removed. However if the rebar is corroded, concrete around it shall be removed. (b) Cleaning the surface of reinforcement bars from dust by using wire brushes and dry cloth and applying FOSROC Rebakleens RR- Rust Remover or equivalent using small brush and allow to react it for 16-24 hrs. (c) Providing and applying two coats of Fosroc Nitozinc Primer - two component, zinc rich epoxy, anti-corrosive protective coating or equivalent by brushes to the exposed and cleaned rebars with an interval of 45minutes to 1 hour @ 40microns DFT / coat and allowed to completely dry for 24 hours complete all as specified and as directed.

Diosmantling wall and celing borads (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness complete all as specified and as directed.

Suspended false ceiling system using 4mm thick high pressure steam cured fibre cement pre-primed texture varient E-board (classic) ISI marked, conforming to IS:14982-2000 over and including GI snap grid frame work for false ceiling, grid size 605x605 mm with GI angle of size 24x24 mm main runner 'T' of size 24x38mm secondary runner 'T; of size 24x28 mm with 6mm GI wire with butterfly clips for leveling, fastners, supports, plugs to wall/joists etc alla as per manufacturer's instructions, including marking holes, cutting chasis and making good existing walls in cement mortar 1:3 or PCC 1:2:4 type B1 complete all as specified and as directed

Preparation of new plaster surfaces of walls and ceilings and applying two coats of oil emulsion distemper over a coat of chalk whiting with wall care putty complete all as specified and as directed.

Preparation of new plaster surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Complete removal of existing treatment and applying 2 coats of oil bound distamper emulsion over a 1 mm thick wall care putty complete all as specified and as directed.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

Preparation of old painted wooden surface of any description, over 10 cm in width or girth not other wise described, and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surface of any description, over 10 cm in width or girth not other wise described, and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as specified and as directed.

Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site complete all as specified and as directed.

Taking down ceilling fan/exhaust fans and deposite to MES store yard from site complete all as specified and as directed.

Taking down Geyser any cap and deposite to MES store yard from site complete all as specified and as directed.

Taking down existing unserviceable submain wiring any size and making good the disturbed surface complete all as specified and as directed.

Point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and as directed.

All as per item No 131 above but for one fan point controlled by one piano switch complete all as specified and as directed.

All as per item No 131 above but One light point controlled by two way switch complete all as specified and as directed.

All as per item no 131 above but for one bell point controled by one bell push all as specified and as directed.

All as per ser item No 131 hereinbefore but for one 3 pin socket outlet 5 Amp Same board complete all as specified and as directed.

All as per ser item No 131 hereinbefore but for one 3 pin socket outlet 5 Amp independent complete all as specified and as directed.

All as per Item no 131 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

Modular type switch, one way 6 Amps , 1 module complete all as specified and as directed.

Modular type switch, Two way 6 Amps , 1 module complete all as specified and as directed.

Modular type switch, one way 16 Amps, 1 module complete all as specified and as directed.

Modular type socket 5 pin, 6 Amps 2 module complete all as specified and as directed.

Modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and as directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , complete all as specified and as directed.

LED Bulb cool white 10 Watt Elegant design direct fit for easy installation complete all as specified and as directed.

Bell push flush type piano 5 Amp complete, complete all as specified and as directed.

Bell multi music 230 volt ,AC single pole complete all as specified and as directed.

Supply and fixing of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and as directed.

Tube light fitting integrated type suitable for LED 10W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and as directed.

Repairs factory made epoxy powder coated Distribution board VTPN 6 ways ,415 Volts with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one MCCB as incommer and SP MCBs outgoing complete all as specified and as directed.

Factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and as directed.

MCB SP-06 to 32 Amp,10KA, 240 volts complete all as specified and as directed

MCB SPN 32 Amp, 240 volts 50Hz AC supply, complete all as specified and as directed

Replacement modular metal box 2 module complete all as specified and as directed

Replacement modular metal box 3 module complete all as specified and as directed

Replacement modular metal box 4 module complete all as specified and as directed

Replacement modular metal box 6 module complete all as specified and as directed

Replacement white cover plate with frame suitable for 1 module complete all as specified and as directed

Replacement white cover plate with frame suitable for 2 module complete all as specified and as directed

Replacement white cover plate with frame suitable for 3 modulecomplete all as specified and as directed

Replacement white cover plate with frame suitable for 4 module complete all as specified and as directed

Replacement white cover plate with frame suitable for 6 module complete all as specified and as directed

Replacement white cover plate with frame suitable for 8 module complete all as specified and as directed

MCCB 415 Volt16 KA 4 Pole 125 Amps complete all as specified and as directed

Single core PVC insulated unsheathed multistanded copper conductor cable 1 Sqmm , 1100 Volts ISI marked drawn through existing conduite complete all as specified and as directed

Sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed

Earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingall complete all as specified and as directed

LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with suitable size and length of 1.5 sqmm copper conductor with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed

LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

Exhaust fans complete with blades, and accessories obtained vide srl Item No-3 above with provision of flexiable cable twin core all as reqd at site. complete all as specified and as directed

Taking down electric energy meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work in building and making the surface good to match with existing surface complete all as specified and as directed

Repair and Fixing ceiling fans complete with blades, and accessories obtained vide srl Item No-3 above with provision of new Anti suicide Fan Rod (suitable size and length and oiling/greasing of fan with provision of flexiable cable twin core all as reqd at site. complete all as specified and as directed

Fixing only electric water heater, geyser storage type obtained vide Srl Item No 04 complete with provision of fixing Nut bolts asrequired at site complete all as specified and as directed.

M/S ARUN ANAND (BID ID -3355066)

M/s Khajuria Construction Co. (BID ID -3363049)