Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹17.2 L+₹2.1 L (13.7%)Rejected-Finance | L2 | Rejected-Finance Second lowest bidder | |
| 3 | L3₹19.4 L+₹4.3 L (28.2%)Rejected-Finance WARD NO 36 CHAUBEY COLONY NARSINGHGARHPURWA CHHATARPUR MADHYA PRADESH 471001 | CHHATARPUR | MADHYA PRADESH | 471001 | L3 | Rejected-Finance Third lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
REPAIS TO LEAKAGES, SEEPAGES, SUNKEN FLOORS AND CERTAIN ALLIED BR REPAIR WORKS IN MD AND OTM ACCN AT AREA II UNDER GE SAUGOR
2023_MES_592669_1
GE/SGR/TOK-09 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
SAUGOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹40,000
Yes
30 Jun 2023
2 May 2023
5 Jun 2023
2 May 2023
3 Jun 2023
17 May 2023
Amount
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed
Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises complete all as specified and directed
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm and making the surface good with cement plastering on jambs and cills of openings in CM 1:6 each complete all as specified and directed .
M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all coins arches, pillars, etc built in cement mortar complete all as specified and directed.
Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortar 1:3 cutting not exceeding 10cm girth complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed in CM(1:6) complete all as specified and directed
All as per Srl item No. 7 above but in dado / skirting laid over and including 10 mm thick rendering in CM (1:4) -ditto-
M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar in CM(1:6) complete all as specified and directed.
M&L for glazed ceramic tiles of size 600mm x 300mm x 7 mm thick (joint free (rectified), coloured, on vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in white/ coloured cement to match colour of tiles laid over and including 15mm thick rendering in CM 1:4 complete all as specified and directed .
M&L for 25 mm thick PCC (1:2:4),type B1 (using 20mm graded stone aggregates) as in sub base of floor to receive tiles or Kota stone complete all as specified and directed
M&L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonry / other than fair finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed
M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) mixed with water proofing compound @ 2% by wt of cement complete all as specified and directed. Note:-WPC shall be measured and paid separately
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed
M&L for PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamfered angles and throating and including all necessary form work complete all as specified and directed.
M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed
M&L for applying three coats of white wash on new ceiling surface including preparation of surfaces complete all as specified and directed.
S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed (Al. section thickness 1.50 mm }
S& F glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63.50 mm x 38.10 x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and bottom rail size is 83 x 44.45x 2mm mm , & lock rail size is 100 x 44.45x 2mm mm & style of door shutter is 85mmx 44.45 x 2mm mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangement, floor door stopper incl. necessary joining cleats , glazing clips and floor springs etc complete, confirming to IS complete all as specified and directed
S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,side and top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed (Al. section thickness 1.50 mm }
S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and directed
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet on the front face & 4mm prelam PVC sheet on back face complete all as specified and directed
S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.
S&F 100mm size butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed
S&F in repairs 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall or in trenches with and including mild steel clamps complete all as specified and directed
S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed
S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .
S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed
S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or fixed to walls with and including suitable size mild steel clamps complete all as specified and directed.
S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed
S&F in repairs for 75mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed.
S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connections complete all as specified and directed
S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm dia GI tubing and connections complete all as specified and directed
S&F in repair PVC float valve assembly including accessories with float valve 20mm dia complete all as specified and directed.
S&F in repair C P bib taps, cast copper alloy fancy concealed type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.
S&F in repair angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwed down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed
S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.
S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repair complete all as specified and directed
S&F in repair vitreous china WHB white flat back size 550x400mm including S&F angle iron brackets, C.P pillar tap fancy type-01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.
S&F in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including P or S trap, etc complete all as specified and directed.
S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend and PVC connection 450mm long high pressure complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction, hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity including dismantling water tanks complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction, hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including dismantling water tanks complete all as specified and directed.
Disconnecting PVC / AC / RCC existing water tank of exc. 250 and not exc. 500 lit capacity , setting a side for repair , cleaning and removing all scale and dirts from tanks and from mouths of circulating pipes and hoisting if required reconnecting and refixing in position etc including writing of date of cleaning with synthetic enamel paint complete all as specified and directed
S&F mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width0.8 to 1.2 m and ht 1.9 to 2.10 M.]
Supplying only Integral waterproofing compound complete all as specified and directed.
M&L for applying evenly a coat of blown type bitumen 85/25 at the rate of 1.50 kg per square metre over a coat of bitumen primer @ 0.30 kg per Sqm and blinding with clean dry sand @ 0.05 Cum. per sqm over roof surfaces including preparation of old surface complete all as specified and directed.
M&L for PCC ( 1: 2: 4) type B-0 using (12.5mm graded stone aggregate) etc on roof top as a leveling course / padding to maintain the slope,finished the surfaces even and smooth without using extra cement complete all as specified and directed..
Taking down of old roof treatment of any description including mud puska, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height complete all as specified and directed. .
M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items complete all as specified and directed:- (a) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed (b) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (c) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (d) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (e) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (f) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .
M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items complete all as specified and directed:- (a) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. (b) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (c) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (d) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction . (e) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane
M&L for cement concrete tiles 25cm x 25cm x 22mm thick,with grey cement and no pigment, machine pressed; set, jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15 mm screed bed in CM(1:4) complete all as specified and directed.
M&L rendering 15 mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab ,complete all as specified and directed.
Treatement for sunken portion is as follows :- (a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (b) M&L for providing 12 mm dia holes of 40mm deep @200mm c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3, all as specified and as directed by Engineer-in-Charge. (c) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement.( Note:-WPC shall be measured and paid separately). (d) M&L for applyin evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces. (e) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). (f) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with incl WPC @ 2% by wt. of cement, as sub base, 75mm thick. (g) M&L for plastering in CM 1:4, 15 mm thick with incl water proofing compound at the rate of 2% by weight of cement and finishing the surface seven and fair. Note:-(a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measured.
maharaja construction and suppliers
m/s mahendra kumar khare contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .