REPAIR TO FLOORING PLASTERING SANITORY PLUMBING FITTINGS AND MISC BR WORK IN ZONE A AREA OF AGE BR I CENTRAL UNDER GE C KIRKEE

Amount

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M & L 100 mm thick PCC type B- 2, 1:2:4 (40mm graded stone aggregate) in sub base complete all as specificed and as directed.

M&L Forming Contraction (Dummy) joints 30mm deep x 8 to 10mm wide, filled with sealing compound Grade 'A' complete all as specificed in clause No.20.B.7.10.2 of SSR Pt I and as directed.

M&L 75mm thick Plain Cement concrete (1:3:6) Type C-2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as as specified and as directed by Engr-in-Charge.

M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor to maintain required gradient or undulations complete all as specified and as directed.

M&L for non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed in CM (1:6) and demolition of existing floor tiles or stone slab complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450 X 300 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10 mm thick cement plaster (1:4) and Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises as backing coat complete all as specificed and as directed.

M&L for non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed in CM (1:6) and demolition of existing floor tiles or stone slab complete all as specified and as directed.

M&L for non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed in CM (1:6) and demolition of existing floor tiles or stone slab complete all as specified and as directed.

M&L Cement concrete 75mm thick (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specificed and as directed.

M&L for rubber moulded designer Chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments and pointed in coloured cement to match coloured tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed complete.

M & L 18 to 20mm thick machine cut cuddappah stone slab, laid horizontal/vertical and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in cooking platform and window cills including demolition of existing stone slab/PCC platform and remove the debris outside the premises complete all as specified.

M&L 15 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick cement plaster (1:4) complete including demolition of existing stone slabs laid and beded in any mortar all as specified and directed by Engr-in-Charge.

S&F 75 mm dia of outlet CI floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specificed and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing top surfaces even and smooth without using extra cement including taking down cement plaster on brick or stone walls or concrete surfaces etc at any position including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 20 mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing in CM 1:4 finishing top surfaces even and smooth without using extra cement including taking down cement plaster on brick or stone walls or concrete surfaces etc at any position including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing top surfaces even and smooth with sagol finish including taking down cement plaster on brick or stone walls or concrete surfaces etc at any position including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for 5mm thick rendering on concrete surfaces of ceiling in CM (1:3) and rendering is to be finished even and smooth with sagol finish complete all as specificed and as directed.

M & L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M & L preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specificed and as directed.

M&L Repair to sunken floor including inside wall as follows : 1) Cut, open and clean cracks in the sunken floor and side wall and repair them with polymer modified mortar 15mm thick modified with Dr. Fixit Pidicrete URP. 2) Prime the surface with Dr. Fixit Primeseal and allow it to dry. Apply the first coat of Dr. Fixit Newcoat. 3) While it is still wet, place a woven glass fibre mesh of measurements 2 mm x 2 mm and allow it to soak completely. 4) Immediately apply the second coat with a roller or squeeze, to ensure complete coverage of the fibre mesh. 5) Apply the third coat after 6 to 8 hours, once the second coat is dry. complete all as specified and as directed.

M&L for PCC 1:5:10 type E-2 (using 40mm graded agg) as in sub base of WC sunken floor complete all as specified and as directed.

S & F in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including S&F PVC P trap 110/110mm bore dia, 110mm PVC (SWR) WC connector with lip ring and connection to flushing pipe anti syphonage pipe etc complete and making good to floor all as specified and as directed.

S & F in repairs Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and as directed.

S & F in repairs, Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S & F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms) complete all as specified and as directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet, ball valve, float and handle incl brackets & Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed.

S & F in repairs vitreous china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets, 32mm Waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F in repairs 15mm dia pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

S & F in repairs bib tap 15mm dia cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs angle Stop valves 15mm dia, cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs 15mm dia Brass CP wall mixer 3 in 1 for mixing hot and cold water screwed down for iron pipe complete all as specified and as directed.

S & F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed.

S & F GI tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors complete including taking up or down Galvanised steel tubing and connections, including cleaning for re-fixing, bore of tubing complete all as specified and as directed.

S & F GI tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 20mm bore and connections complete all as specified and as directed.

S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position including taking down sanitary pipes, eaves gutters and rainwater pipes (any size or pattern), in any type and position including all fittings, heads, shoes, bends, swan-necks, branch pieces, couplers, reducers, vent cowl, stack clamps etc. complete all as specified and as directed.

S & F 75mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position including taking down sanitary pipes, eaves gutters and rainwater pipes (any size or pattern), in any type and position including all fittings,heads,shoes, bends, swan-necks, branch pieces, couplers, reducers, vent cowl, stack clamps etc. complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair 75mm PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repairs 75mm PVC (SWR) bend with access door of any radius complete all as specified and as directed.

S&F in repairs 110mm PVC (SWR) bend with access door of any radius complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description complete all as specified and as directed.

Veekay Enterprises

ARK ENTERPRISES

MAHESH DADAJI BACHHAV

S.R.M.K Enterprises

Shri Sant Cosntruction

JP ENTERPRISES

L.K.R.TIWARI CONSTRUCTION