Design Supply Installation and Commissioning of Instrumentation PLC based control system and Fire alarm and Detection system for Bijwasan to Delhi Airport ATF Pipeline

Amount

Supply Items - Bijwasan ATF control Syst

Pressure Transmitters with Cable glands Range max (0 to 20 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mo unted

Pressure Transmitters with Cable glands Range max (0 - 100 kg/cm2); Smart type; accuracy 0.075% or better Installation: 2" Pipe Mo unted

Differential Pressure Transmitter with manifold valves and Cable Glands.Range max (0 to 3 kg/cm2).Smart type; accuracy 0.1% or bette r

Temperature Transmitter with duplex RTD, Thermowell & Cable glands, Range max (0 to 100 0C ) Smart type; accuracy 0.1% or better In stallation: Transmitter 2" pipe mounted; RTD in thermowell on process pipe above ground installation.

Temperature Transmitter with surface mounted duplex RTD, Weld pad and dual sensors & Cable glands, Range max (0 to 100 0C); Smart ty pe; accuracy 0.1% or better Installation: Transmitter 2" pipe mounted ; RTD in weldpad welded to process pipe surface for below gro und installation.

Pressure switches with junction box & cable glands suitable for low pressure side, set point 1 Kg/cm2 to 10 Kg/cm2. Proof Pressure: 200 Kg/cm2.

Pressure switches with junction box & cable glands suitable for High pressure side, set point 3 Kg/cm2 to 25 Kg/cm2. Proof Pressure: 200 Kg/cm2.

Field Configurator for Pressure & Temperature transmitter with Hart protocol

4 1/2 Digit DMM (True RMS)

Multifunction Calibrator with rechargable battery, charger, carry case, etc

Pressure Calibrator 0 - 20 bar (Portable), accuracy - 0.1%

a) For I/Os upto 500 (of any type)

For DI

For AI

For RTD

For A/O

For Pulse

For AI signals

For AO signals

For RS 232/485 signals

For LAN application

3 Phase 4 wire (415 V) TT applications

1 Phase 2 wire (230 V) applications

Supply Items - Bijwasan ATF control Syst

MCS cum SCC / SCC operator workstations / terminals

SIC Terminal / Electrical Maint. / T&I Terminal / Alarm Management Terminal / Network Management Terminal

Industrial Grade Programming Terminal (Laptop) for BV-RTUs

GPS Time Server for time synchronization of all MCS / SCC computers and control system computers as per the tender specifications

Firewall as per tender specifications and datasheets

24 port Industrial Grade dual Ethernet Switches for redundant 10/100/1000 MBPS LAN with networking software, cables & connectors etc . complete inall respects as per tender specifications. (1 set comprises of 2 switches)

WAN Router (8 port) system for MCS / SCC connectivity with software, cables, connectors etc complete in all respects as per tender s pecifications

Industrial media converters / Line Interface units (LIU) compatible to Owner supplied single mode 24 fibre OFC & supply of patch cor ds, pig tails, connectors etc. for extension of Tank Farm Management System / Marketing Terminal Automation Software / SIC Terminal / any other terminal (1 set comprises 2 converters)

LaserJet Printer, c/w all interconnecting cables, cords, connectors etc., complete in all respects as per tender specs & datasheet

Print Server for dual ethernet connection of printer

Swivel chairs

Table for SIC terminal

Table for printers

PLC programming / Ladder logic software etc. for the following: (a) Dual redundant PLC's (b) Programming/ Engineering Terminals

Flow Computer complete with software for meter proving and tables as per API for petroleum products, turbine / mass flow meter input s, Density meter inputs etc as per the tender specifications & data sheet.

5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications

Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete w ith all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tend er specifications for 5 KVA UPS.

1 KVA UPS with 20 minutes battery back-up for SIC terminal / Electrical maintenance terminal

PLC Processor Module

PLC Processor power supply

Rack power supply

Digital input module

Digital output module

Analog input module

Analog output module

Serial Interface communication module

Field interrogation power supply

Set of fuses for line repair services

PCB's, one of each type for 5 KVA UPS

Supply Items - Bijwasan ATF control Syst

2 loop, Addressable, Intelligent Fire Detection and Alarm Panel with FM200/ CO2 release facilities for automatic fire detection & a nnunciation of alarms for various types of detectors installed like multi sensor, heat detectors, response indicators, loop isolato rs, manual call points, hooters etc installed in plant area and various buildings as per tender specifications

UV / IR Flame Detectors explosion proof & weather proof along with allmounting & other accessories as per the tender specifications.

Intrinsically safe Rate of Rise Heat Detectors for hazardous areas alongwith all mounting & other accessories as per the tender spec ifications

Multi sensor detectors along with all mounting & other accessories asper the tender specifications

Monitor modules alongwith all mounting & other accessories for third party interface as per the tender specifications.

Addressable Manual Call Point (for safe area) along with all mounting & other accessories as per the tender specifications.

Addressable Beacons for safe area along with all mounting & other accessories & instructions sign as per the tender specifications.

Addressable Hooters / Horn / Strobe (for safe area) along with all mounting & other accessories as per the tender specifications.

2 Pair x 1.5 Sq. mm, unarmoured FRLS cable complaint to BS: 5308 as per the tender specifications for indoor applications to be laid through conduits.

Weather proof junction boxes including supply of double compression cable glands, plugs for unused cable entries including WP certif icates as per the tender specifications for various detectors in buildings.

Beacons (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifica tions.

Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specific ations.

Response Indicators along with all mounting & other accessories as per the tender specifications.

"Isolators for isolating of signalling loop in case of any fault alongwith all mounting & other accessories as per the tender specifications."

FXO-FXS VOIP Box as per specifications

Day-Night Colour IP PTZ Dome Camera, with 15X to 20X Optical Zoom, minimum 10X Digital Zoom along with IP 66 weatherproof housing wi th IR Illuminator, industrial grade power supply, camera interfacing junction box as applicable, lightning & surge protection and su itable mount , complete with cables, connectors, required interfaces etc. as per tender specifications

Field mounted Explosionproof & Weatherproof IP65 Junction Box for Ex-proof Camera/field cameras with suitable cable glands, plugs, F iber termination patch panel, MCB, media convertor etc complete in all respects for installation of exproof camera/field camera. The junction shall be used for installation of network switch and optical accessories, power supply etc for CCTV system as applicable .

Supply of 5 to 6 meter pole for mounting of CCTV as per technical specification of the tender.

Test Power Supply 0 - 60 V, 10 A 600 Watts, 19" rack mount, sleek 1U type

Micro processor based Temperature Calibrator; Range ambient to 300 deg C; accuracy 0.5%

LED Display Unit (50" & above) System with interface complete with all inter connecting cables, cords, connectors, peripherals etc c omplete in all respects as per the tender specifications & datasheet.

MMI Software of same make as the PLC (including one time license fee) etc as per the tender specification, for the following for run ning of the station in emergency situations like failure of SCADA computers:

For T3 DAFFPL with total I/Os as per I/O table attached with tender (Max I/Os 250) For T3 DAFFPL with total I/Os as per I/O table at tached with tender (Max I/Os 250)

2 section console desk for BIJWASAN Terminal 2 section console desk for BIJWASAN Terminal

2 section console desk for T3 DAFFPL 2 section console desk for T3 DAFFPL

T3 DAFFPL(1 set comprise of 2 Workstation) T3 DAFFPL(1 set comprise of 2 Workstation)

Telephone Instrument as per tender specifications

Services - Bijwasan ATF control Systems

Erection, testing & commissioning of 2 Loop Fire Alarm & Detection System comprising of addressable Fire Alarm Panel, addressable de tectors of various types such as multisensor detectors, rate of rise heat detectors, manual call points, hooters, etc including FM20 0/ CO2 release system for control building consisting of Control room, Equipment room, MCC room, transformer room, VFD roomand other office /workshop rooms etc. and pumping sheds, piping area energizing & testing of the complete system with simulation and also de monstration of working of the complete system,commissioning of the complete system including the cost of all materials, labour, cons umables, equipments tools & tackles as per the specifications & instructions of Site Engineer / EIC.

Installation of UV/IR Flame Detectors, terminating the cables at field and control panel end, connecting to earthing grid by supplyi ng and installing all the required materialssuch as supporting structure, cement concrete, painting, GI wire etc.(excluding supply o f the UV/IR Flame detector) complete in all respect as per specifications.

Multi Sensor Detectors & isolators

Rate of Rise Heat Detectors for safe area & hazardous area

Manual Call Point (for safe area)

Beacons / Hooters / Horn / Strobe (for safe area)

Installation of Explosion Proof & Weather Proof Manual Call Point/ Hooters/ Beacons in Hazardous area, terminating the cables at fi eld and control panel end, connecting to earthing grid by supplying and installing all the required materialssuch as supporting stru cture, cement concrete, painting, GI wire etc.(excluding supply of the Manual Call Point/ Hooter/ Beacon) complete in all respect as per specifications.

Installation of explosion proof / flame proof junction boxes for marshalling of control / signalling cables, terminating the cables at field and control panel end, mounting the junction boxes, connecting to earthing grid by supplying and installing all the require d materials such as supporting structure, cement concrete, painting, GI wire etc.(excluding supply of the Junction Boxes) complete i n all respects as per specifications, approved drawings and direction of EIC / Site Engineerincluding all labour, tools, materials, glanding, ferruling etc.complete in all respects.

Laying of unarmoured signal cable through GI pipe / wall / tray etc for interfacing of various type of detectors e.g. multi sensor, ROR, UV/ IR flame detector, response indicator, hooters, beacons etc

Response Indicators & Monitor modules

Supervison of erection, testing & commissioning of PLC based control system at attended stations including supervision for terminati on of control cables & erection of panels, looptesting, and commissiong of complete control systems along with support for interfaci ng with SCADA system and field instrumentation systems for operation of station facilities in remote & auto mode. This shall include development of control logics, database,HMI screens etc. for commisosing of the system complete as per drawings / specifications a nd acceptance of system by Owner. Supply of all labour, consumables, tools, services rendered etc. shall be in the contractors's sco pe.

Installation and interfacing of FXO and providing support in extending subcribers through FXO

Supervison of erection, testing & commissioning of PLC based control system at attended stations including supervision for terminati on of control cables & erection of panels, looptesting, and commissiong of complete control systems along with support for interfaci ng with SCADA system and field instrumentation systems for operation of station facilities in remote & auto mode. This shall include development of control logics, database,HMI screens etc. for commisosing of the system complete as per drawings / specifications a nd acceptance of system by Owner. Supply of all labour, consumables, tools, services rendered etc. shall be in the contractors's sco pe.

Interfacing of the Tank Farm Management System / Refinery Tank Gauging System

Foundation, laying and erection of 5 to 6 meter pole for installation of CCTV as per tender specifications including the cost of l abor, material, tools, tackles and all civil works complete in all respect.

Erection, Installation, Testing and Commissioning of CCTV Cameras which includes Powering up, Network connection, interfacing with the OFC and Network switch in Control Room. Providing assistance in interfacing with existing system. Laying of power supply cable & OFC in Field shall be in owners scope. all items as per BOM of CCTV system to complete the work in all respect as per scope and technical specifictaions of the tender

Services - Bijwasan ATF control Systems

Training on supplied system (including PLC based control system, SCADA, PAS etc)

Submission of As Built Documentation

AMC - Bijwasan ATF control Systems

AMC for 1st Year

AMC for 2nd Year

AMC for 3rd Year

AMC for 4th Year

AMC for 5th Year

Yokogawa India Limited

Sitra Infotech pvt. Limited

ABB India Limited

Emerson Automation Solutions Intelligent Platforms Private Limited