Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹7,000
Closing Date
20 Jul 2022, 3:00 pmClosed
ADDITIONAL COLLECTOR (D) MADURAI
0/0 ADDITIONAL COLLECTOR (D) DRDA MADURAI COLLECTORATE MADURAI -625020
Construction of Cremation Shed and other infrastructure facilities to Samathuva Burial ground_2 nos. in AGAMT-II-2021-22 Village panchayats of Alanganallur Block in Madurai District in Package no. ALR -03
2022_RDTN_240530_1
568/2022/D7 /Alan03/24.06.22
Open Tender
Civil Works
Item Rate
180 days
ALANGANALLUR
REFER TENDER DOCUMENT
4 documents required · 4 mandatory
₹0
₹7,000
1 Aug 2022
8 Jul 2022
20 Jul 2022
11 Jul 2022
20 Jul 2022
11 Jul 2022
Amount
Geophysical survey charges including all etc., complete.
Cost and Supply of 150mm dia PVC Casing Pipe etc., complete.
Drilling of 150mm dia Vertical borewell including all hire & labour charges etc., complete.
in Over Burden soil - up to 90.00m (including cost for inserting the casing pipe in drilled hole)
in Hard rock - From 90.00m to 300.00m
Cost and Supply of single phase 2 HP submersible Pumpset with duty of 20 lpm x 155m head etc., complete.
Cost and Supply of Single phase 2 HP Panel board suitable for the above Pumpset etc., complete.
Cost for Construction of masonry Pedastal and supply, fixing of MS kishok box for fixing of panel board & EB meter including all charges etc., complete.
Cost for HDPE 1000lit capacity sintex tank including all charges etc., complete.
Cost for Construction of masonry pedestal for sintex tank including all charges etc., complete.
Cost and Supply of following GI / PVC Pipes & Specials etc., complete.
50 mm Adopter
50 mm UPVC Pipe
50mm UPVC Coupler
Nylon Rope
150 mm MS Bore Cap
50 mm MS Clamp set
50 mm GI Elbow
50 mm GI Hex Nipple
50 mm Non Return Valve
50 mm GM Gate Valve
50 mm GI Union
50 mm GI Pipe
4 Sqmm Submersible cable
Cost for erection of 2HP Submersible Pumpset etc., complete.
Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD 127)
Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains. (SD 68)
Earth work excavation for foundation in all class of soils except hard rock requiring blasting but shoring shuttering and baling out water wherever necessary and refilling the sides of the foundation with excavated earth in layers of not more than 15 cm thick well rammed and consolidated and depositing the surpous earth in all palces shown by the departmental officers with initial lead and lift etc including levelling the site etc., complete with standard specification in hard stiff cllay, stiff black cotton soil, hard fred earth, shale murums, gravel stoney earth, and earth mixed with 50% fair sized boulders, and hard gravelly soil in foundation.
Refilling the basement with excavated earth other than sand complying the standard specification
Cement concrete 1:4:8 (one cement, five sand, and Ten hard broken stone) Using 40mm ISS size Hand Broken granite stone Jelly for Foundation and Flooring including labour charges for mixing concrete watering and laying the concrete in layers not more than 15 cms thick compacting etc complete complying with standard specification etc complete.
Brick work in cement Mortor 1:5 (One cement and live sand) using II class Bricks for the following including mixing mortar and all other labour charges etc complete Above basement
Supplying and erecting shuttering including necessary support for plance surface in Foundation Basement and Roof sllabs struting upto 3.29 M height for plane surfaces for floors for RCC column footings columns plinth beam and connecterd with foundations grade beams, raft slabs stair case steps, bed blocks, critical pier, etc beams roof slabs, using mild steelsheets of size 90 x 60 cm and 10 gouge stiffened, welded with steel angles of size 25 mm x 25 mm x 3mm for boarding laid over silver oak (country wood) joists of 10 cm size x 6.5 cms size spaced at abour 90 cms center to center and supported cauanna props of 10 cm to 13 cms spaced at 75 cms to center to center etc., complete complying with standard specification and as directed (SI - 155)
Supplying, fabricating and placing in position inild steel or ribbed tor steel and all reinforced cement Concrete works as per the design given including cost of steel and binding wire in all floors etc complete complying with Standard (MS rods or RTS rods) which will be supplied departmentally at section stores and cost will be recovered at issue rate. The binding wire shall be supplied by the Contractor.
R.C.C 1:1.5:3 (one cement one and half sand and three machine broken stone) using 20 mm ISS gauge machine broken HBG metal for RCC works excluding cost and (abrication otreinforcement and centerning shuttering charges but including curing and providing fixtures like fan clampsin the RCC floor or Roof wherever necessary and bearing surfaces of walls sides and bottom of slab, beam etc., shall be finished smooth with cement mortar 1:3 (one cement and three sand) 12mm thick and with kraft paper without claming extra etc as directed by the departmental Officers complete complying with standard specification.
Plastering with CM 1:5 mix, 12mm thick including cost, conveyance and all labour charges etc., completed.
Ceilling plastering with CM 1:3 mix using 10mm thick including cost, conveyance and all labour charges etc., completed
C.C 1:2:4 mix using 20 mm ISS metal including cost & conveyance of all materials to site and all labour charges etc., complete.
Painting two coats with ready mixed Plastic emulsion of first class quality paint and of approved colour over a priming coat inculding through scrapping, clean removal of dirt etc
Finishing the top of sloped roof , sun shade with Machine Pressed Ornamental tiles of Approved quality laid in cement mortar 1:3 20 mm thick mixed with WPC at 2 % by weight of cement used and top pointed with the same red oxide mixed mortar etc complete. complying with standard specification .( Observed data by PWD )
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
H SRI HARI
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .