Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.4 LAccepted-AOC D 154 ADARSH NAGAR JABALPUR MP 482001 | JABALPUR | MADHYA PRADESH | 482001 | L1 | Accepted-AOC L1 bidder lowest | |
| 2 | L2₹40.9 L+₹1.0 L (2.61%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹41.8 L+₹1.9 L (4.84%)Rejected-Finance 37A 115 MADHU NAGAR AGRA 282001 UP | AGRA | AGRA | UP | 282001 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹42.3 L+₹2.4 L (6.03%)Rejected-Finance 1 SANCHAR NAGAR NEAR KRISHI UPAJ MANDI DAMOH ROAD JABALPUR M P | JABALPUR | MADHYA PRADESH | 482001 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹43.8 L+₹3.9 L (9.90%)Rejected-Finance 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹46.9 L
EMD Value
₹93,860
Closing Date
20 Feb 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Jabalpur
Garrison Engineer (West) Jabalpur Supply Marg Post Box No. 54 Jabalpur Cantt-482001 (MP)
SPL REPAIR TO BLDG NO T-21 HRDC AND SPL REPAIR TO ORS TOILET BATHROOM BLOCK BLDG NO P-16 AND NP-14 ALONGWITH SEWAGE LINE AT MB AREA SIG COY AND PROVN OF 300RM DRAIN AT BLDG NO P-11 OF HQ MB AREA OF AGE B/R-I UNDER GE (W) JABALPUR
2024_MES_638909_1
8674/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Jabalpur
As per tender documents
7 documents required · 7 mandatory
₹500
GE (West) Jabalpur
₹93,860
12 Mar 2024
24 Jan 2024
26 Feb 2024
25 Jan 2024
20 Feb 2024
6 Feb 2024
25 Jan 2024 - 1 Feb 2024
Amount
Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness incl part chipping (below or above ground level) complete all as specified and directed.
Dismantling of wall tile, floor tile, dado including bedding but backing and rubbish off permises complete all as specified and directed.
Demolition of wall and ceiling boards any type (fiber pulp, insulation etc) insulaion boards/slabs/blankets/any thickness including cover fillets complete all as specified and directed.
M&L for non skid ceramic coloured joint free tiles 10 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), in floors, set and jointed in neat cement slurry and pointed in white cement to over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for non skid ceramic coloured joint free tiles 10 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), as in vertical surfaces such as skirting / dado set and jointed in neat cement slurry and pointed in white cement to over and including 10 mm thick backing in CM (1:4) complete all as specified and directed.
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
Material and labour for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified
M&L for 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc complete all as specified and directed.
Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L 15 mm thick rendering on fair faces of bk /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in copings, kerbs, and the like all as directed incl necessary form work complete all as specified and directed.
Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames exc 1.50sqm but n exc 4 sqm with shutter (without taking off shutters from the frames) complete all as specified and as directed..
Taking down shutter n exc 1.00 sqm each of any description complete all as specified and as directed.
All as per above item but exc 1 Sqm but n.exc. 2 Sqm each complete all as specified and directed.
Cutting holes in brick walls exc 1/2 brick & n exc full brick built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of doors, windows & ventilator and making good dismantled portion in cement mortar 1:3 etc complete all as specified and directed.
M&L for 35 mm thick second class hardwood moulded flush door with pre pressed lamination on both side , solid core constructionall as specified in SSR Part-I section 8, clause 8.20 (b) complete all as specified and as directed.
S& F for Solid PVC moulded door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening but single prelam PVC sheet used instead of Plain colour PVC sheet as per specification & drawing complete all as specified and directed.
S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed.
S&F for aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed.
S&F for extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed.
S&F for extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.
S&F for Butt hinges 100mm, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F, Mild steel barrel tower bolts 150 mm size, stove enamelled black, with bright bolt and fixed complete all as specified and directed.
S&F for Mild steel pressed handles 150mm size, oval type, stove enamelled black complete all as specified and directed.
S&F, Mild steel sliding door bolts 300mm size, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.
S&F Floor 40-50 mm door stopper of aluminium alloy body and tongue anodised with hard steel spring ,fixed in floor complete all as specified and as directed.
S&F stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.
S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n. exc 0.5 Sqm in each pane complete all as specified and directed.
S & F 4.5 mm thick figured glass pin head type and glazing with oil putty/wooden beads in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed.
S&F in repair 25mm dia MS Powder coated dropary rod including brackets of approved quality etc complete all as specified and as directed.
S&F Fancy type Knob suitable for 25mm dia Dropery rod complete all as specified and directed.
Taking down steel tubing and connections including cleaning for refixing or removal from site for 15mm bore pipe all as specified and directed by Engr-in-charge.
Taking down steel tubing and connections including cleaning for refixing or removal from site for 20mm bore pipe all as specified and directed by Engr-in-charge.
Taking down steel tubing and connections including cleaning for refixing or removal from site for 25 mm bore pipe all as specified and directed by Engr-in-charge.
S&F 25mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 16mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 20mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.
Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
S&F in repair chromium plated Brass CP mixer of WHB for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and directed.
S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, PVC connections 450 mm long all as specified and directed by Engr-in-charge.
S&F in repair vitreous China squatting pan of pattern Orissa Pattern , size 580 x440 mm white with P or S trap , front or backinlet and integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and directed (Make: PRAYAG / CERA/ Parryware)..
S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle, lever, float valve and PVC bend including connecting to ITWC/ ETWC, PVC connection 450 mm long and fixing on wall bracket complete all as specified and directed by Engr-in-charge.
S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.
S&F in repair 15mm bore bib tap fancy type chromium plated cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-charge.
S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed.
S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.
S&F 15 mm concealed type stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup complete all as specified and directed.
S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed.
S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed
Taking down of eves gutter,rain water pipes ,AC/PVC pipes of any size or pattern including all fittings etc complete all as specified and directed.
S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
S&F, in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.
S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed
M & L for Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms incl edge moulding & cutting holes for gas pipe through drill machine and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing fixed over and including screed bed 15 mm thick in CM 1 : 6 etc all complete.
M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations all as specified and as directed.
M&L for machine cut cudappa stone slab 20 to 25 mm thick over and including cement screed base 15mm thick in CM 1:6 in floors laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed.
Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site all as specified and directed by Engr-in-charge.
S&F rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge.
S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.
S&F in repair gunmetal, globe or gate valve for 20 mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-charge.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete all as specified and directed.
M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper with 2mm thick wall care putty over a coat of chalk whitining on walls complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coats of oil bound distemper over 2mm thick birla wall care putty over a coat of chalk whitining on walls complete all as specified and directed.
M&L preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed.
M&L applying two coats of exterior emulsion paint over a coat of primer on old decorated surfaces incl preparation of surfaces complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L for laying DWCP 150 mm dia pipes in trenches Class SN-8 conforming to IS 16098 (Part -2) in 6 mtr length with coupler complete all as specified and directed by Engr-in-charge.
M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/ ridge to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling of timber scantlings unframed 40Sq Cm and over in section, in any position complete all as specified and directed.
Dismantling of plain/ corrugated AC sheeting, any gauge, thickness, incl nainital or similar pattern roof covering complete.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, wind ties etc. conforming Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.
S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-290 ( Gde E-165) complete all as specified and as directed..
Providing and filling epoxy putty into RCC crack after opening up RCC cracks in V– groove manner approximate 10 mm wide & 10mm deep using mechanical cutter, properly cleaning the same to remove loose dust dirt etc and filling the same using Nitocote VF –three component, solvent free, thixotropic, Epoxy resin based putty having 100% solid contents mixed density of 1.6 g/cc, compressive strength – 50 N/mm ², pot life of 40 minutes at 27 degree C, Drying time 8 hrs. recoatable time 24 hrs. And finishing in line and level with existing concrete surface etc. complete as per in charge GE. Make; - Thermax/ webac chemicals/ chemco system as approved by the GE Note : Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 mtr etc. complete as per specification and directed by GE . Note : Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 mtr etc. complete as per specification and directed by GE . (iii) Adoption of necessary safety arrangements like safety belts ropes, helmets netting etc which are required for safety of worker working at height exceeding 3 mtr shall be mandatary and deemed to be inclusive in quoted rates
S&F in repair vitreous china wash down water closet pan (Padestal pattern) white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed(Make: PRAYAG / CERA/ Parryware/Jaquar)..
M & L for snap grid false ceiling system of E board exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), and fixed with pre painted 4mm thick E board of approved design and with provn of light fixture complete all as per manufacturer instructions and as directed.
S&F in repairs Health faucet (Make: PRAYAG / CERA/ Parryware/Jaquar or equivalent make as approved by GE complete as specified and as directed.
S&F of aluminium powder coated section, as in frame for door, window, ventilators,fix glazing and partitions of standard section and thickness as directed , cut and jointed together with cadium plated steel screws, plugs for fixing screws, etc. complete all as specified and as directed by the Engineer-in-Charge. Note-(i) Fixing of frame shall be as per manufacturers instructions and all fitting shall be paid under this item. (ii) Thickness of powder coating shall not be less than 50 micron. (iii) Frame shall be one or more rebate as per requirement at site.
Supply and fixing for aluminium alloy powder-coate) window frame with shutters open able type, with aluminium sections as per of “Jindal” section numbers for casement windows including aluminium alloy snap type beads, handles, aluminium barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a) Section for shutter 47.62x44.45x1.87 mm thick (b) Glazing clip weighing 0.259kg/mtr. (c) Windows shall be provided with 02 Nos. of tower bolt of size 125mm for single leaf shutter and 03 Nos. for double leaf. Handles shall be aluminium ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and 01 No on each openable leaf shall be provided. (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. 2.Glass pane and wire gauge shall be measured and paid for separately.
S&F in repair Mortice lock,vertical type size 100 mm 4 lever suitable for aluminium door including fixing with stainless steel screw as complete all as specified and as directed ( Make : Godrej or equivalent )
S & F 300 mm stainless steel handle suitable for glass door with necessary fitting & accessory completed as directed as directed.
M&L for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc. complete all as specified and directed.
S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & wt between 36-60 kgcomplete all as specified and directed by Engr-in-charge.
S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed. Make: PRAYAG / Jaquar or equivalent complete all as specified and directed.
M&L MS work as in wind ties for roof including securing bolts, drilling holes, notching for wire etc complete all as specified and as directed.
S&F in repairs vitreous China bowl urinal flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed(Make: PRAYAG / CERA/ Parryware/Jaquar).
S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed. Make : Prayag/ Parryware/Jaquar or equivalent complete all as specified and directed.
S&F, in repair, chromium plated, urinal spreader complete all as specified and directed. Make : Prayag/ Parryware/Jaquar or equivalent complete all as specified and directed.
S & F in repair 32 mm thick PVC waste pipe of minimum length 1 mtr for kitchen sink and WHB etc complete all as specified and as directed.
Supply & Fixed in repairs Two way bib cock (Make: Jaquar / PRAYAG or equivalent make as approved by GE) complete as specified and as directed.
M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:4 complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F in repair 125mm/ 150mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.
S&F in repair PVC (SWR) cowl including jointing with solvent cement of 110 mm dia complete all as specified and directed.
M&L for 10mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3% by wight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and direcated (WPC shall be measured & paid seperately)
M&L for Complete removal of existing water proofing treatment from roof and providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non approachable roofs- (i) Cleaning and sweeping and washing down with water to remove all dust etc from plastered roof surfaces / walls and filling of crack with sealing compound etc (ii) Bituminous based primer conforming to IS: 3384 – 1965 @ 0.3 Kg/Sqm (iii) One layer of super thermo APP modified water proofing memberane with non polyester reinforcement of any make.( M/s STP texsa ltd/Hyperplas memberane of M/S IWL India ltd/MS STPand Tikki Tar ltd). (iv) 3mm thick and minimum Weight @3.50Kg/Sqm,laid with gas torch and pasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surface after cutting necessary grooves and making good with PCC gola 1:2:4 type- B1 etc adhere to bitumen all as per manufactures instructions. (v) Applying two coat of aluminum paint @ 0.20 Kg / Sqm in two coats over bitumen layer as per manufacturer instruction . (application including sides lap,over laps shall be provided not less than 10 cm and joint sealed with torch as per manufactureerr's instructions specifications and as per particular specifications complete all as specified and directed.
Supply only Integral water proofing compound complete all as specified and as directed.
M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.
M&L for Mild Steel TMT bar 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.
M&L Fromwork to Soffiting of Suspended slab such as roof slab,floor slabs landing and similar work not exceeding 200 mm thickness as directed by Engr-in-Charge
M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.
M&L preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
M&L applying two coats of cement based paint over a coat of primer on old decorated surfaces incl preparation of surfaces complete all as specified and directed.
Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
S&F steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc complete all as specified and directed.
S&F 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe complete all as specified and directed
S&F grating doom 100mm dia CP (Min weight 25 grms) complete all as specified and directed
S&F Flush pipes to WC including all joints and making good of all disturbed portion complete all as specified and directed
M & L for 100mm thick Cement concrete type B-2, 1:2:4, using 40mm graded stone aggregate in subbase complete all as specified and directed.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 25mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.
M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.
Supply and fix figured glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane fixing in aluminium window complete all as specified.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet, reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed.
S&F Aluminium handles cast type anodised of 150mm complete all as specified and as directed.
S&F aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge.
M&L for ENDURA out door tiles 30 cm x 30 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry and pointed in white on coloured cement to match as in floors etc layed over and including screed bed or bedding layer of cement mortar 1:6, 15 mm thick etc all complete (Make-H & R Johnson, Brand-Endura designer digital series)
S&F for looking mirror of size 5 feet X 3.5feet with designer glass and frame to be fitted with wall including all necessary arrangements and fittings complete all as specified and directed. Make: Saint Gobain or equivalent approved by GE.
Excavation in trenches not exceeding 1.5 mtr wide &exceeding upto 3.00 mtr deep in any type of soil including getting out complete all as specified and as directed.
M&L for PCC 1:2:4 type B1 using 20 mm mm graded stone aggregate in surface channal and drains complete all as specified and as directed.
EXTRA for forming fair finish to drain or channel 30 cm inner girt in cement concrete using extra cement incluiding formings moulds mitred stopped ends etc complete all as specified and as directed.
M&L brick work with fly ash brick moudlar size brick in CM 1:6 complete all as specified and directed
M&L for 15 mm thick plastering on fair faces of bricks/conc. Surfaces in CM (1:4) including finishing the surfaces even and smooth without using extra cement compleete.
Returing,filling in, including spreading,levelling ,watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
TMT bars for reinforcement 10mm dia and overetc cut to lenth, bent to required shape including bending, cranking and hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip quality complete all as spacified.
M&L for RCC precast NP 2 pipe 300 mm dia laid and tested in trenches complete all as specified and as directed.
M & L for PCC (1:3:6) type C2 (using 40mm graded aggregate ) as in 300 mm dia NP 2 pipe concrete bed to drain including packing under and fencing against the side of pipe after they are laid and tested complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
Taking down carefully any type of old unserviceable point wiring copper or aluminium conductor (light, fan, socket, bell or power) point complete with fittings such as switches ceiling roses, lamp holders, sockets, fan regulators, call bell, light fittings with PVC conduit surface / concealed or wooden battens including sunken cast iron / pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified & directed by Engineer-in-Charge. Note: Painting work measured and paid seperately under respective items.
Taking down carefully Main switch and Distribution boards any make and size complete all as specified and as directed.
Taking down carefully any type of old unserviceable submain wiring with PVC conduit surface / concealed or wooden battens etc and making good the disturbed surfaces to match with the existing surface complete all as specified & directed by Engineer-in-Charge.
M&L of Sub main wiring with two single core PVC Insulated cable two run of size 4 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 20 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire including making good disturbed surface to match existing complete all as specified & directed. Note : - Two run of 4 Sqmm & one run of 4.0 Sqmm cable shall be measured as one unit run.
M&L of Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed. Note : - Two run of 6 Sqmm & one run of 6 Sqmm cable shall be measured as one unit run.
M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.
(a) One light point controlled by one switch.
(b) One fan point controlled by one switch.
(c) One socket point controlled by one switch on same board.
(d) One socket point controlled by one switch on Independent board.
Description all as per item No 153 here in before but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 1.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet 15Amp independent board complete all as specified and directed by Engineer in charge .
S&F switch piano flush type suitable for 5 Amp 230 Volt of polycarbonate body complete all as specified & directed.
S&F Switch socket combination 5 in 1, 5 pin 5/6 Amps flush type universal of polycabonate body complete all as specified & directed.
S&F Switch socket combination 5 in 1, 5 pin 6/16 Amps flush type universal of polycabonate body complete all as specified & directed.
S&F lamp holder / batten or angle holder Insulated body incl 9 w LED bulb with back plate suitable for batten fittings complete all as specified & directed
S&F Ceiling Fan regulator electronic type 280 Watt capacity of polycarbonate body ISI marked complete all as specified & directed.
S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge
Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.Make: Legrand cat no :5076 21 or eq in SEIMENS
Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 4 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.Make : Legrand / Seimens/GE
S&F in replacement sheet metal enclosure MCB DB double door [Acrylic], Triple pole and neutral, 440 volts, 4 way with 200 Amp, 10 KA breaking capacity rated copper bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.Make:Legrand Cat no :5077 80 or Eq in SEIMENS/GE
S&F in replacement MCB Triple Pole and Neutral 63 Amps,415 V ,10KA breaking capacity complete all as specified & directed.Make: Legrand cat no :4086 83 or eq in SEIMENS /GE
S&F in replacement MCB Single Pole and Neutral 240Volt, 40 Amps, B Series,10KA breaking capacity complete all as specified & directed.Make: Legrand cat no :4086 18 or eq in SEIMENS /GE
S&F in replacement MCB Single Pole 240Volt, upto 40Amps,10KA breaking capacity complete all as specified & directed..Make: Legrand cat no :4086 90/92/93/94/95/96 or eq in SEIMENS /indoasian
Supply & fixing, in replacement, Kit kat DB by SPN Distribution box double door, protection grade IP 43, in fine powder coated matt finish with best CRCA sheet fitted with shrouded neutral insulated pin type copper bus bar Din rail earth bar, 8 way conforming to IS 13032 & 8623 complete all as specified and directed ( Make : Legrand CAT NO 507621 / SIEMENS / Schneider (Electric) as approved by GE)
Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.Make: Legrand cat no :5078 11 or eq in SEIMENS /GE
Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), (Make : Philips Cat part No BN 021 LED 22S 6500/4000 PSU GR S1/GE /Oshram
S & F LED Mirror light fitting 2 ft tubelight 12 watt aluminum housing and integrated electronic driver THD max 10 % ,CRI min 80 % complete with fixing arrangements on wall all as specified and directed.Make- PHILIPS Cat part no:BN 021 LED 12S 6500/4000 PSU GR SI or equivalent in havells/GE/Wipro
Supply & fix in replacement of LED Security Light Luminaire 25 watt with 2500 or more lumen warm white, surge protection device upto 4KV, IP65 or more, IK07 or more, potted driver suitable for 180 to 270 V, 50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make: Philips cat part no: BRP029 LED25/WW MRPSU GR DX or havells cat part no. ENDURASUNDOWNSL25WLED765PASYBOPCIHD or equivalent in wipro/GE
Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. -1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.
S&F LED light fitting square 2'x2' CM 30watt, 3000 lumen, Warm white 5700K, THD max 10 % ,CRI min 80 % warm white along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make: Philips cat part no: RC380BLED30S-5700 G6L60W60 PSU OD or equiv in GE/Osram/Wipro.
Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site by eng in charge Make : Havells/ CG/ Bajaj
Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.Make:Bajaj,havells or equivalent.
Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, pvc body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.Make:Bajaj,havells or equivalent.
Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 2 core 10 Sqmm complete all as specified and directed by Engineer in charge
Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 4 core 10 Sqmm complete all as specified and directed by Engineer in charge
Supply and fix TPN DB 200 amps bus bar 415 volts , I/C 63 Amps TPN and O/G MCB SP -06 Nos complete all as specified and as directed.
KRD ASSOCIATE
M/s Om Infracon
Kirti Chandeliya and Assosicates
a k builders
DEEPAK CONSTRUCTION
M/S RAJ BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .