Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.7 LAccepted-AOC RAMA PARK A 121 BLOCK A UTTAM NAGAR WEST DELHI DELHI 110059 | DELHI | WEST DELHI | DELHI | 110059 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹37.3 L+₹66,494.70 (1.81%)Rejected-Finance RZ 382 3RD FLOOR GALI NO 11B KAILASH PURI EXTN PALAM COLONY PALAM VILLAGE NEW DELHI 110045 | SOUTH WEST | DELHI | 110045 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹39.4 L+₹2.7 L (7.37%)Rejected-Finance NO 1505 SHIV MANDIR DELHI GATE NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹39.6 L+₹2.9 L (7.91%)Rejected-Finance | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹40.1 L+₹3.5 L (9.49%)Rejected-Finance D 662 WZ 1598 R 1 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹48.3 L
EMD Value
₹96,642
Closing Date
1 Aug 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Delhi Cantt-10
GE (West) Delhi Cantt-10
Provn of certain sanctioned works in the area of AGE B/R-I under GE (West) Delhi Cantt-10
2024_MES_663666_1
GE/DW-55 OF 2024-25
Open Tender
Civil Works
Item Rate
270 days
DELHI
Class D Category a(I)
8 documents required · 8 mandatory
₹500
GE (West) Delhi Cantt
₹96,642
Yes
7 Sept 2024
3 Jul 2024
3 Aug 2024
3 Jul 2024
1 Aug 2024
19 Jul 2024
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in any type soil and removing debrish beyond MOD land
PCC 1:2:4 type B1 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specificed and as directed by Engr-in-Charge.
Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil complete all as specificed and as directed by Engr-in-Charge.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point as directed by Engr-in-Charge.
M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.
M & L Cement concrete type B1 1:2:4 (20mm graded aggregate) and finished the surface even and smooth without using extra cement as in Floors and pavings, etc all as specified and as directed.
Forming 12 mm thick expansion joints filled with pre formed bituminous filler and top 30 mm primed and sealed with sealing compound Gade A
M&L for mild steel work with square/rectangular section in post, Roof trusses (framed), trussed, purlins, rafter, crane gantries, wind ties, rails and fastenings and heavy bracket, framing of tube sections including distance pieces, cleats, MS plates, nut & bolts etc complete all as specified and as directed.
M&L for preparation of new steel & iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over a coat of red oxide primer complete all as specified & directed.
S&F of Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed by Engr-in-Charge. Make:- JSW, KAMDHENU, TATA, JINDAL
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed.
Filling under floor, spreading and levelling in layers n exc 25cm thick well raming including watering as requred complete all as specified and directed
M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and as directed.
M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface under sub base flooring or plinth protection etc. complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
M&L for RCC M25 design mix, using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M&l for RCC M25 design mix, using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed.
M&L for RCC M25 design mix using 20mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M&L for RCC M25 design mix using 20mm graded stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for RCC M25 design mix using 20mm graded stone aggregate in Chajjas complete all as specified and as directed.
Use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
Use and waste for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.for rough finish surface complete all as specified and as directed.
Use and waste for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finish surface complete all as specified and as directed.
Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening, complete all as specified and as directed.
Use and waste for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed.
Use and waste Formwork to sides of pillars,posts, struts, piers, columns and stanchions complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Ditto as above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic complete all as specified and directed .
M&L for PCC 1:3:6 type C-2 (20 mm graded agg) as in surface channel/drain / haunching of manhole etc. complete all as specified and as directed.
S & F of box type steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
Ditto as per item above but without glazing bars complete all as specified.
M&L for Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thic screed bedding layer in CM 1:6 complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick screed bedding/backing in CM 1:4
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thic screed bedding layer in CM 1:6
M&L for vitreous china wash hand basin flat back size 550x400 mm size white excluding taps waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwd shanks and fly nuts, 32x600mm long PVC waste pipe complete all as specified and as directed.
M&L for 15mm thick cement plaster on brick or concrete surface in CM 1:4 finished even and smooth surface using extra cement complete all as specified and as directed.
M&L for Ready Mix plaster 15mm thick on brick or concrete surface of internal and external walls finished even and fair surface without using extra cement complete all as specified and as directed.
M&L for Ready Mix plaster 5mm thick on concrete surface of ceiling finished even and fair surface without using extra cement complete all as specified and as directed.
M&L for brick work in cement morta 1:6 using sub class B bricks, straight or curved on plan exc 6mtr mean radius complete all as specified and directed.
M&L for 40mm thick DPC on horizontal or vertical surface in PCC 1:2:4 type B0 using 12.5mm graded stone aggregate including necessary formwork and using WPC as per Manufacturer insruction complete all as specified and as directed.
Preparation of newly plastered surface on wall and applying two coats of cement based paint over one coat of primer white or tinted complete all as specified and as directed.
M&L for preparing of newly plastered surface of wall and applying two coat of oil bound distemper including 1mm thick wall care putty all as specified and directed.
Preparation of newly plastered surface on wall and applying three coats of white wash white or tinted complete
Ditto but three coats of white lime wash on ceiling complete all as specified and as directed.
M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish & reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing as per manufacturer's instructions complete all as spd and directed. Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer. 3. The APP Membrane to be inserted in the parapet wall/wall by cutting chases of atleast 65X50mm size & making good in CM 1:3. complete all as specified and directed.
M&L for rendering 10mm thick cement mortar 1:4 on fair face of brick work or concrete surface on wall/roof surface including using WPC as per manufacturer instruction complete all as specified and as directed.
S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors/door frames; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as spd and directed.
S & F for 35mm thick 2nd plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.
S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified.
M&L for PCC 1:3:6 type C-2 ,bed concrete to 150mm bore dia drain pipes (of 100mm thick) including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and as directed.
M&L for 150mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed as specified
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates, kerbs including weathering slightly rounded or chamfered and throating complete all as specified and as directed.
M&L for 75mm thick SFRC manhole/drain cover size not exc 1.00sqm each set and jonted in cement mortar 1:4 complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.
S&F 150 mm long aluminium anodised barrel tower bolt extruded section complete all as specified and as directed.
S&F 150mm long extruded aluminium alloy handle complete all as specified and as directed.
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.
S&F 4mm thick pin headed, figured glass with oil putty in square n exc 0.50 sq m in each pane complete all as specified and as directed.
M&L for preparation of new steel surface and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L 20mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as spd and directed.
M&L 25mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as spd and directed.
S&F for 500 ltr capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified.
S&F 20mm float ball valve high pressure of PTMT with epoxy coted aluminium rod & high density plastic bal serewed for ison pipe complete all as specified and as directed.
S&F brass body chromium plated fancy type health faucet with chromium plated 1mtr long pipe complete all as specified and as directed.
S&F in repair vitreous china white european type WC with "P" or "S" trap including connection to drain pipes, traps and PVC flushing cistern with pipe 32mm dia PVC flush pipe including PVC seat cover and fixing bolts complete all as specified and directed.
M&L for Bib tap fancy type, chromium plated for 15mm bore of pipe, cast copper alloy with crutch or butter fly handle, screwed for iron pipe complete
M&L for stop vale/angle vave cast copper alloy chroumium plated fancy type for 15mm bore dia of pipe complete all as specified and as directed.
S&F 15mm bore dia pillar tape cast copper alloy chromium plated fancy type screwed down for high pressure pipe complete all as specified and as directed.
S&F 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washers complete all as specified and as directed.
S&F for brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
M&L for 75mm out let diaPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints, fixed to wall or laid in trenches complete all as specified and as directed.
S&F in 75mm bore PVC (SWR) bends any radius all as specified and direction
S&F in 75mm bore PVC (SWR) bends with acess door any radius all as specified and direction
M&L for 110mm bore PVC (SWR) pipe conforming to relevant IS single socketed in any length with rubber ring joint and fixed to wall complete incl taking down old rain water pipes complete all as specified and as directed.
S&F 110mm bore PVC (SWR) bends any radius all as specified and direction
S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door any radius all as specified and direction
S&F 110mm bore PVC (SWR) vent cowl any radius all as specified and direction
Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed
M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed
M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed
M&L for cutting groove in brick wall 75mm wide and 65mm deep and shaping horiaontal face of groove with cement Mortar 1:3 for fixing of APP membrane and filling the groove with PCC 1:2:4 type B0 using 12.5mm graded stoen aggregate after inserting membrane complete all as specified and directed.
S&F 1000 Ltr rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings after dismantling of old tank all as specified and directed.
M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor complete all as spd and directed.
All as per item above but 25 mm bore tubing.
M & L for brick work with sub class ' B' brick straight or curved on plan exc. 6 mtr mean radius built in cement mortor 1:4 including all arrangement including demolition brick work complete all as specified and directed.
Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including providing necessary groove for required size of panel, including taking down cement plaster/grit plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. including providing necessary scafolding.
M&L for complete removal of old treatment and preparation of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1 mm thick wall care putty wherever required to bring uniform surafce complete all as specified.
M&L for complete removal of old treatment and preparation of old plastered/concrete surfaces of ceiling and applying two white wash complete all as specified and directed.
M&L for preparation of old treated surfaces of walls and applying one coat of weather proof exterior acrylic emulsion paint complete all as specified.
Taking down chowkhats or frames not exc 1.50 sqm each with shutter (without taking off shutters from the frame) and removing complete all as specified and directed.
Taking down chowkhats or frames exc 1.50 sqm but n exc 4 sqm each with shutter (without taking off shutters from the frame) and removingcomplete all as specified and directed.
M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing etc complete all as specified and directed.
M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) complete all as specified & directed.
Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner
M & L Rendering 12-15mm thick in ready mix on brick work or concrete surfaces including taking down cement plaster complete all as specified and directed.
M & L Rendering 5mm thick in ready mix on ceiling to be finished even and fair (without using extra lime or cement) as in patch works or whole work including taking down cement plaster complete all as specified and directed..
S&F 25mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.
M&L for Chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes, cleaning with water, allowed to dry and applying a layer of antirust and then Zinc rich epoxy primer all as specified followed by a layer of bonding coat & then guniting over steel welded mesh 2mm dia of wire and aperture 75mm total thickness of guniting not exc 40mm thick (average thickness) with cement mortar 1:2 using OPC 43 grade cement and finally applying cement plaster over guniting surface of required thickness to give even, uniform, and smooth finish conforming to proper geometrics in cement mortar 1:3 to match with the existing surface as in sides and soffits etc. slabs, Chajjas, fins, facias, parapets, beams and columns etc complete including necessary scaffolding, shuttering, necessary chases to brickwork or RCC members at any height up to 4 storey building complete all as directed. Note: Steel Welded mesh is to be welded with existing reinforcement. The Cost of welded mesh is deemed to be included in the unit rate quoted and the work to be carried out up to 4 storey bldgs/in floor roofs complete all as specified and directed.
Preparing surface by complete removal of existing treatment of wall any layer incl brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots all as specified and directed
Preparation of newly plastered surface on wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for providing 1mm thick wall care putty on wall surface complete all as specified and directed.
Material & Labour for applying and finishing walls plastered surface with two or more coats of premium Acrylic Smooth exterior paint of required shade over and including priming coat of exterior primer complete all as spd & directed.
M&L for sand bedding/cushioning under interlocking tiles floor complete.
M&L Machine pressed precast concrete interlocking glossy paver block any sahpe and size confirming to IS15658-2006 of 60mm thickness, M-35 grade set and jointed with white cement and pigment
S&F vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed.
S &F in repairs brass CP shower rose of size 125 mm with swivel joints fixing to steel pipes etc. all as specified.
S&F in repairs vitreous china full stall urinals,white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe all as specified and as directed.
S&F 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
S&F pre cast concrete block for kerb stoen with solid block ex 10cm in width type C1, 1:3:6 (using 20mm graded stone aggregate ) set in CM 1:6 of any shape and size. Kerb stone shall be fixed in true line and level or incurves for edging of road side path including embedding in ground to any depth as reqd.
M&L for preparing surface of wall and applying two coat of oil bound distemper all as specified and directed.
M&L preparation of newly plastered surfaces and applying two coat of white wash on ceiling surface complete all as specified and as directed.
M&L preparation old plastered surfaces of ceiling and applying one coats of white wash all as specified and directed.
M&L concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable 1.5 sqmm size 1100 volts grade conforming to IS:694 in box of 1.6mm thick including one coat of synthetic enemelled black paint and providing with brass screws and cup washers including single core multi stranded FRLS copper conductor 1.5 sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :-
(a) One light/fan/bell point controlled by one way switch 5/6 amps.
(b) One 3 pin 5/6 amps socket outlet point controlled by one way switch on independent board.
(c) One 3 pin 5/6 amps socket outlet point controlled by one way switch on same board.
M&L for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 sqmm size 1100 volts grade conforming to IS:694 in new metal flush box of 1.6mm thick including one coat of synthetic enemelled black paint with new modular white cover plate frame of suitable size of required colour fixed with brass screws and cup washers including single core multi stranded FRLS copper conductor 2.5 sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 pin socket 15/16 amps on independent board.
S&F of switch piano type 5/6 amps single pole one way complete all as specified and directed.
S&F of switch piano type 15/16 amps single pole one way complete all as specified and directed.
S&F of socket outlet multipurpose 2/3 pin 5/6 amps flush button type complete all as specified and directed.
S&F of switch modular type 5/6 amps single pole one way complete all as specified and directed.
S&F of switch modular type 15/16 amps single pole one way complete all as specified and directed.
S&F of socket outlet multipurpose 2 in 1, 5/6 and 15/16 amps complete all as specified and directed.
S & F of Lamp holder,PVC /Polycarbonete type with back plate suitable for batten fittings with connections complete all as specified and directed
S&F of LED bulb of 9 watt complete all as specified and directed. Make: Havells
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply and fix Fresh air ventilation fans of 250mm sweep speed 1200 RPM , air delivery not less than 850cum/minute rated voltage 220-230 volt 50Hz minimum two years warrantyng single phase 230/240 V Of 300 mm sweep with louvre including cutting of holes in a round shape and including fixing the ventilating fan complete all as directed and specified.
Supply and fix exhaust fan metallic type ventilating single phase 230/240 V Of 300 mm sweep with louvre including cutting of holes in a round shape and including fixing the ventilating fan complete all as directed and specified.
S & F sheet metal enclosure with metal clad socket and with plug top 20 A capacity and with MCB double pole 20A Suitable for mounting on wall surface or concealed in wall as per site requirements complete all as specified and directed.
S&F of factory made epoxy polyester powder coated distribution board SP & N 4 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.
S&F of SPN MCB 32 to 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down of existing/old tube light fitting complete all as specified and directed.
Supply and fixing LED building security light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories as per IS safety Norms , including SS braided hose connection pipe set of two of required length for each geyser complete all as specified and directed.
S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.
Supply, laying, testing and commissioning of XLPE insulated armoured heavy duty electric cable with aluminium stranded copper conductor 1100 volt grade cross sectional area 16 sqmm 2 core LT cable complete all as specified and directed.
Supply, laying, testing and commissioning of XLPE insulated armoured heavy duty electric cable with aluminium stranded copper conductor 1100 volt grade cross sectional area 10 sqmm 2 core LT cable complete all as specified and directed.
M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.
A S CONSTRUCTION CO. (BID ID -3071724)
K S CONSTRUCTIONS (BID ID -3073013)
M/S Ayub Khan (BID ID -3073601)
SHIVA ENTERPRISES (BID ID -3073025)
UNIQUE BUILDERS (BID ID -3072699)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .