REPAIR OF LEAKAGE/SEEPAGE OF ROOF/BLDG AND OTHER RELATED B/R WORK IN ZONE-VI UNDER AGE B/R-IV OF GE (SOUTH), MEERUT CANTT

Amount

Material & labour for provision of GI frame work (snap grid) suitable for size as in false ceiling of size 605mmx605mm including fixing 4mm thick gypsum board /E-board in ceiling size 60cmx60cm fixed to metallic snap grid consisting of following and all as directed including dismantling wall and ciling boards or insulation boards/slabs any thickness including cover fillets. (i) Gi sections incorporated in frame work shall conform to designation given in IS: 737-1986. (ii) The snap grid shall conist of GI frame work main/cross tee of size 36.5mmx25mmx1.0mm thick and 25mmx25mmx1.00mm respectively. (iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of Supply and fix 2mm to 4mm dia mild steel Gi wire. (iv) The main and cross tees shall be jointed at junction/crossings with GI frame work angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer's instructions. (v) The snap grid(main/cross tee section) shall be supported at ends all along the wall with Gi frame work angle of size 25mmx25mmx1.00mm anodized thick (vi) Size of the snap grid shall be 605mmx605mm. (vii) Minimum average thickness of anodizing shall be 15 micron. complete all as specified & directed.

Material & labour 6mm thick fibre cement, corrugated or semi-corrugated shets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts including Dismantling of old sheet any description as in roof covering incl ridge and removing from site complete all as specified & directed. Make:- UPAL, Everest and Charminar

Dismantling plain or corrugated sheeting any description gauge, thickness, including ridges, Nainital or similar pattern roof coverings complete all as specified & directed.

S&F plain galvanised 0.63mm, MS sheeting as in ridges, crumple section, hips, valley gutters, drips and straight flashings ( length & girth as fixed) with grade of zinc coating 275 complete all as specified.

Material & labour Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws/ J hooks complete all as specified and specified.

Dismantling timber scantlings 40 sq. cm and over in section as in framed work, in any position complete all as specified & directed.

S&F in repair rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries,wind tie, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, reveting and / or welding or connecting with bolts and nuts (including revets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc, also for wedging, plumbing, truing up and fixing conf to Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

Material & labour clean sawn Timber framed and fixed Second class hard-wood in scantlings, trusses, purlins, rafters all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Material & labour 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

Material & labour 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed.

Material & labour for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified & directed.

Demolition of concrete any description and any position not otherwise specifically provided for in SUNKEN complete all as specified & directed.

Material & labour PCC 1:5:10 type E2 (using 40mm graded stone aggregate) for filling in sunken floor complete all as specified & directed.

Material & labour PCC 1;2;4 type B1 (using 20 mm graded stone aggregate) 75 mm thick padding to required slop in Sunken finished even and smooth without using extra cement complete all as specified & directed.

Material & labour rendering 15 mm thick cement mortar 1:3 mixed with water proofing compound on fair faces of concrete surfaces finished even and smooth without using extra cement for sunken slab complete all as specified & directed.

Taking down app water proofing membrane, single layer on roofs all as specified and directed.

Material & labour for PCC padding 1:2:4 type B1(using 20 mm graded stone aggregate) average thickness 25mm,finished fair and even without using extra cement on roof surfaces complete all as specified and directed.

Material & labour for 20mm thick rendering in CM 1:4 on concrete surfaces of roof mixed with water proofing compound (WPC) as per manufacturer's instructions surfaces finished even and smooth complete all as specified and directed. Note :-WPC shall be measured and paid for separately under respective item of schedule ‘A’ here-in-after).

Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a track coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified & directed.

Supply only integral water proofing compound complete all as specified and directed.

S&F as in repair Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes complete all as specified.

Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

Supply, fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

S&F as in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F as in repair chromium plated Angle stop valve incl flange, any description, suitable for 15 mm bore pipe,complete all as specified.

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified & directed.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squatt pattern etc , set with concrete and making good to floor. complete all as specified.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

Supply & fixing in repair rotational moulded polyethylene water storage tanks 500 liters capacity in triple layers (cylindrical, vertical in closed top) hoisted and fixed in position complete all as specified & directed.

S&F for 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms), complete all as specified & directed.

All as per item No 33.00 above but herein as in repairs.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified & directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC bends 75mm bore, any radius complete all as specified & directed.

Supply and fix in repair PVC bends 110 mm bore, any radius complete all as specified & directed.

Supply and fix in repair for 75mm bore PVC floor traps plain with grating fixed in repairs including jointing with solvent cement complete all as specified & directed.

Supply & fix in repairs steel C.P. grating 100/125 mm dia waste pipe hole fitted as required at site complete all as directed by Engineer-in-Charge.

S&F 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

Material & labour Non skid coloured tiles of size 600x600x8-10mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed.

Material & labour non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including dismantling of old tiles complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm/350x250x7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 including dismantling of old tiles complete all as specified & directed.

Material and labour for rectifying the leakage of wall mixer/wash hand basin/sink mixer including replacement of brass spindle & PVC washers necessary fixtures etc complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified & directed.

S&F in repair stainless steel sink with draining board, made out of 0.8 mm thick sheet for kitchen with waste pipe, CI cantilever brackets, connecting union over all size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed.

Demolition brick work built in cement mortar including all quoins arches pillars etc complete all as specified & directed.

Material & labour brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified.

Material and labour for preparation of new/old wooden/steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified & directed.

Tayal Builders

Rajneesh Jain

B.K.construction

SA construction co.

jitendra AND Co

Manglam Engineers and Construction Co

M/S AGARWAL CONSTRUCTION CO.