Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹36 L
EMD Value
₹72,000
Closing Date
23 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Providing Aluminium Partition with False Ceiling over Mezzanine Floor of Mirage Hangar in Overhaul Division, HAL BC.
8181
TENDER NOTICE/NCP/13/24-25/02
Works
Contract Section Civil-FMD-Bangalore
₹0
₹72,000
23 Jul 2024
2 Jul 2024
2 Jul 2024
23 Jul 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. Hot finished welded type tubes complete all as per the Instructionsof Engineer Incharge.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work using ISMC,ISA,M.S.plates etc, including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer all complete as per the Instructionsof Engineer Incharge.
Providing and applying synthetic enamel paint for Steel structures such as pipes, tubes, angle, grills, Gates,chequered plates, frames etc, in Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture,filling joints, patti etc, complete as per direction of Engineer-in-charge.
Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators,and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, filling up the gaps at junctions, with dash fasteners and EPDM rubber/neoprene gasket, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, filling up the gaps at junctions, with dash fasteners and, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete as per direction of Engineer-in-charge.
Providing and fixing Powder coated minimum thickness 50 micron windows fastener of required length with necessary screws etc. complete etc.as per direction of Engineer-in-charge.
Providing and fixing aluminium Powder coated minimum thickness 50 micron round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-incharge.
Providing and fixing 12 mm thick prelaminated particle board, Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) along with EPDM rubber / neoprene gasket etc. all complete as per the architectural drawings and the directions of engineer-in-charge.
Supplying and fixing in true horizontal level thermocol false ceiling of sheets of 25 mm thickness and having density of 15-30 kg/cum and using hot dipped galvanized steel section, exposed surface chemically cleaned, capping pre-finished in baked polyester paint, main tee of size apprx. (24 x 32 x 0.27) mm at every 1200 mm c/c max, mandatory stitched cross T of size approx. (24 x 27 x 0.25) mm at every 1200 mm c/c max and cross ‘T’ of size approx. (24 x 25 x 0.254) mm at every 200 mm centre to centre max and approx. (19 x 19 x 0.30) mm wall angle around the wall to form a grid of size approx. (600 x 600) mm and suspending the grid using 2 mm thick pre-straightened GI wires. The work is inclusive of making provision for cut outs for lights and other fixtures and neatly finishing the edges as per instructions of the Engineer-in-Charge. Approximate height of the ceiling from the floor slab is 3.50 m to 4 m.
Supplying and fixing approx. 2 mm thick PVC vinyl sheet flooring with approved rubber adhesive on steel surface floor of approved colour and design including cutting the sheet as per site requirement etc., all complete as directed by the Engineer-in-Charge. Note: Sample should be approved by the HAL before supplying the material.
Rupees Twenty Six Lakh Sixteen Thousand Three Hundred Eleven and Fifty Five Paise Only
WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
3 pin 5/6 A socket outlet
6 pin 15/16 A socket outlet
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
12 Module (200mmX150mm)
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
8 way , Double door
12 way , Double door
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
4 way (4 + 12), Double door
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
10A, Single pole
16A, Single pole
FIRE ALARM SYSTEM
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
Supplying, installation, testing & commissioning 4 Zone sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.
Rupees Four Lakh Thirty One Thousand Nine Hundred Sixty Six and Nineteen Paise Only
Rupees Thirty Lakh Forty Eight Thousand Two Hundred Seventy Seven and Seventy Four Paise Only
Approximate Amount Put to Tender
Rupees Five Lakh Forty Eight Thousand Six Hundred Eighty Nine and Ninety Nine Paise Only
Rupees Thirty Five Lakh Ninety Six Thousand Nine Hundred Sixty Seven and Seventy Three Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN13.pdf
TENDER_DOCUMENT • 3.28 MB
Drawing1.pdf
TENDER_DOCUMENT • 0.16 MB
amend.pdf
TENDER_DOCUMENT • 0.45 MB
119APB.pdf
TENDER_DOCUMENT • 0.32 MB
119AChecklist.pdf
TENDER_DOCUMENT • 0.28 MB
119AECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
119APQF.xlsm
TENDER_DOCUMENT • 0.03 MB
119ATB.pdf
TENDER_DOCUMENT • 2.65 MB
119APQ.pdf
TENDER_DOCUMENT • 0.21 MB
Drawing2.pdf
TENDER_DOCUMENT • 0.70 MB
119AUndertaking.pdf
TENDER_DOCUMENT • 0.60 MB
119APbf.xlsm
TENDER_DOCUMENT • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .