C.O Science Lab in Govt. Senior Secondary School Khunni Tehsil Nankhari Distt. Shimla H.P.

Amount

Providing and fixing ISI marked decorative flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless sqm Steel butt hinges with necessary screws within all leads and lifts and carriagae of material complete as per direction of the Engineer-incharge

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge

Providing and fixing windows of ECO 4000 series having section for external frame should be of 72mmx55mmx 0.58mm thickness section for mullion should be of 72mmx55mmx0.58mm thickness, section for shutter frame (styel) should beof47mmx20mmx0.58mm thickness, section for glass bead shouldbeof 12mmx12mm x0.58mm thickness and section for fly mesh should be of40 mmx20mmx0.58mm thickness & section for mesh fixing shoukd be18mmx6mmx0.58mm thickness. The section of sash bar in openable shutters shall 55mmx20mmx0.58mm (PO 107) each glazed shutter should be provided with one set of S.s. pivot hinges, seccolor make handle with receiver. Each mesh shutter should be provided with one set of pivot hinges, seccolor make handle and latch gaskets made of ethy /propylene diamine (EPDM corner brackets & mullion caps made of nylon/polypropylene. Glazed shutter & fixed glass portions shoukd be provided with glass of 5mm thick glass panel of modi and grills 10mm square M.S. round bar complete as per Arch. drowing and direction including carriage with in all leads and lifts and as per HP.PWD. specifications of 1990

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : as per direction of the Engineer-incharge

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in?Charge With cement mortar 1:4 (1cement: 4 coarse sand) as per direction of the Engineer-incharge

Providing and fixing 12mm thick green chalk board(non-magnetic) with superior quality framing specially anodized aluminium profile 20x15mm with corners of specified plastic shall be provided. The board surfacr shall be non-porous ceramic particles on the top screen surface for smooth writing with chalk over 11mm thick particle board which shall have basing material of galvanized steel 28mm thick. The board shall be fixed on the wall with specially designed "J" clamps and square clamps with the help of nylon sleeves and screws as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and laying Full Body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete: Size of Tile 600x600 mm as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, Already rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, Already rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing specified wood frame work consisting of battens of 4cmx4cm size fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete :Kiln seasoned and chemically treated hollock wood . as per drawing and instruction of Engineer-in-Charge.

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete :12 mm thick as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete :12 mm thick as per drawing and instruction of Engineer-in-Charge.

Providing and fixing Decorative first class kiln seasoned teak wood cornice out of 75x60mm section with wood screws in ceiling and linning/panelling including mitring at junctions and to be polished within all leads and lifts and carriagae of material complete as per direction of the Engineer-incharge.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

French spirit polishing :Two or more coats on new works including a coat of wood filler as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Big size Orissa Pan No. 2071 of size 580x440 mm of CERA or equivalent as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Wash basin No.1012 or CERA or equivalent. as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing white vetrious china flat back wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern :White Vitreous china Flat Back Large No. 5001 of CERA or equivalent as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing white vetrious china Division plate of CERA or equivalent of size 90x320x720 mm and including its fittings cutting and making good the walls wherever required as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms :Kent touchless Sanitiser/ Liquid soap Dispenser-1000ml, white. as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms Wash basins , Lab sink & kitchen sink as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing 115 mm nominal bore, 86 mm long, weighing not less than 88 gms PTMT concealed stop cock with flange of Jaguar and approved quality and colour as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge With Indian WC No. 2061 as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan With Indian WC No. 2061 as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing uplasticised PVC connection pipe with brass unions : 45cm length 15 mm nominal bore With Indian WC No. 2061 Wash basins , Lab sink as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

PProviding and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.: 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. for toilets as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia.Wash basins , Lab sink as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 107 mm long, weighing not less than 110 gms as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore for urinals as per site requirement complete and as per drawing and instruction of Engineer-in-Charge.

Ram Bharos Mukhia

Gurmeet Thakur

JAI PARKASH