REPAIR, MAINT AND REWINDING OF CEILING FANS/ EXHAUST FANS AND ALL ACCESSORIES AT RMS UNDER AGE E/M OF GE 868 EWS

Amount

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as directed by Engr-in-Charge

Dismantling and taking out burnt copper winding from ceiling fan of sweep 1200mm any make, model, type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of ceiling fans work in RMS area with suitable winding machine and connected acessories. Spare parts shall be measured and paid under respective

All as per item No 3.00 above but ceiling fan of sweep 1400mm

Dismantling and taking out burnt copper winding from wall cabin fan/table fan of sweep 400 of any model and type any make, model, type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of Wall cabin fan/table fans work in RMS area with suitable winding machine and connected acessories. Spare parts shall be measured and paid under respective

Dismantling and taking out burnt copper winding from Exhaust fan 450mm sweep of any model and type any make, model, type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of Exhaust fan 450mm sweep work in RMS area with suitable winding machine and connected acessories. Spare parts shall be measured and paid under respective items

All as per item No 6.00 here-in-before but for exhaust fan of 300mm sweep, make, model and type

Taking down and Supply and fixing Exhaust fan PVC 150 mm sweep single phase 50 Hz AC, air flow rate of 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified and directed by Engr-in-Charge. Make : Richa/Bajaj/CG/V-Guard Note : Old Exhaust fan deposit for MES AGE(E/M) Store

All as per item No 8.00 200 mm sweep single phase 50 Hz AC Make : Richa/Bajaj/CG/V-Guard Note : Old exhaust fan shall be deposit to AGE E/M Store

All as per item No 8.00 250 mm sweep single phase 50 Hz AC Make : Richa/Bajaj/CG/V-Guard Note : Old exhaust fan shall be deposit to AGE E/M Store

All as per item No 8.00 300 mm sweep single phase 50 Hz AC Make : Richa/Bajaj/CG/V-Guard Note : Old exhaust fan shall be deposit to AGE E/M Store

Taking down and Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Complete all as specified and directed by Engr-in-Charge. Make : Richa/Bajaj/Usha/CG/Orient Note : Old Ceiling fan shall be deposit to AGE(E/M) Store.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.

M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connecting to earth dolly, including PVC rectangular box for mounting switches/sockets/regulators etc. with 3mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and as directed. Make: Richa/KEI/Finolex/Polyacab Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa

(a) One Ceiling fan/Exhaust fan controlled by one, one way switch.

Taking down and M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed. Make:- Anchor/Kinjal/Legrand

Taking Down and M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc Make:- Anchor/Kinjal/Legrand

Preparation of old painted surface of Exhaust fan of any sweep, model and make by using chemicals, wire bush, etc to make smooth surface and apply two coats of synthetic enamel paint (first quality) by spraying similar to existing colour of the Exhaust fan, motor, blades (set of 3), etc including

Fan capacitor of capacity 2.5 MFD (Make: Universal/Usha)

Fan capacitor of capacity 4.0 MFD (Oil filled) Make Universal/ Usha.

Ball bearing/Bush bearing suitable for ceiling fan, of any sweep. Make of bearing-TATA,NBC,SKF (6201to 6204)

Fan clamp MS including nut, bolt, rubber reel, split pin complete of suitable size 1200/1400 mm

Flexible wire, copper conductor,Twin twisted multicore cable 2 core High Quality twin core flat wire of size 14/76 Sqmm wire . Make Plaza/Richa/RR Kabel

Top/bottom canopy suitable for ceiling fan of any sweep, make, model and type. Set of two

Ceiling fan 1200mm Sweep Rotor ring reel small/big size all as directed by Engr-in-Charge.

Down rod made out of GI tubing medium grade with both side thread & hole of 15mm two feet long

M/S Lucky Builders

SAYED ALI AND SONS

M/S SHANTI UDYOG

Rameshwar Prasad

commercial enterprises

das enterprises