CWEK-64/2020-21

Amount

Material and labour for repair to pot holes of any depth not exceeding 1.00 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads/path etc cutting around edges to at least 25mm and more as per site requirement in depth and making good by filling screened and graded road metal, watering and well rammed (including supply of screened and graded road metal ) complete all as specified and as directed.

Material and labour for repair to pot holes of any depth not exceeding 1.00 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads/path etc cutting around edges to at least 25mm and more as per site requirement in depth and making good by applying tack coat of paving bitumen GRADE VG-10 @ of 5 Kg/10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder GRADE VG-30 @9.8 Kg per 10 Sqm, binded with 0.09 cum of stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chipping) depth of pot holes exceeding 30mm complete all as specified and as directed.

Material and labour for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sq m, not exc 50 mm deep including rolling scarified surfaces, with power roller 8 to 12 tonne capacity to required camber and gradient and removal the rubbish/ demolished material outside defence land, complete all as specified and as directed.

Material and labour for 75mm thick (compacted thickness) water bound macadam with course aggregate as limestone/ sandstone/ flint/ quartzite of grading 1(63 to 40mm size), blinded with stone screening type 'A', spread, watered, rolled and consolidated to ;gradient and camber required by using power roller 8 to 12 Tonne capacity complete, all as specified and as directed.

Preparing unsurfaced Water bound Macadam/ WMM by brushing with wire brushes for removing caked mud etc, sweeping with air compressor to remove all loose dirt etc and applying evenly priming /tack coat with paving bitumen (Grade VG-10) at the rate of 10 Kgs /10 Sqm on prepared surfaces, complete all as specified and as directed.

Material and labour for preparation of black top bituminous macadam surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a bituminous tack coat of GRADE VG-10 @ of 3 Kg per 10 sqm , complete all as specified and as directed.

Material and Labour for premixed bituminous macadam (consolidated thickness 50mm or less ) laid / rolled and compacted to required gradient and camber using binder content of 4% by weight of total mix using paving bitumen of grade VG-30, complete all as specified and as directed.

Material and labour for preparation of black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a bituminous tack coat of GRADE VG-10 @ of 5 Kg per 10 sqm of road surface ,complete all as specified and as directed .

Material and labour for laying bituminous premix semi dense asphaltic concrete 30mm (consolidated thickness) using with 5.5% of binder (grade VG-30) content by weight of total mix, rolled and compacted to required camber and gradient using mechanical paver and rolled with 10-12 tonne capacity vibratory road roller rolled to uniform smooth surface ,complete all as specified and as directed. Note- (i) Bituminous premix semi dense asphaltic concrete shall prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory as decided by GE.

Supply and fixing dual (62 beads minimum) cat eye aluminium casted body of size 100mm x 100mm x18.5mm having ABS plastic strip containing 62 mini retro reflective glass beads of colour white/red/yellow on both sides (minimum 31 beads on each sides) fixed complete with steel zinc plated nails/stud of dia 12mm and of of length 120mm, complete all as specified and as directed . Note:- (i) Fixing arrangement shall be as per manufacturer instructions. (ii) Designed to bear 25 Tonnes load and having impact strength of 253 KN.

Supply and fixing metal tublar delineator 1050mm long and 75mm dia made out of mild steel pipe black powder coated, reflection media at top disc of micro prismatic reflection of yellow colour protected by powder coated MS mesh and intensity grade reflection media on post retro reflective sheet of red yellow colour complete all as specified and directed. Note:- Delineator shall have high intensity retro- reflective band of 1" width for extra visiblity. Delineator shall be fixed in position in PCC block 1:2:4, type B-1, using 20 mm graded crushed stone aggregates, block size of 300x300x300 mm, embedded 150mm in ground.

Material and labour for preparation of new road surface and applying 2.50 mm thick retro-reflective thermo plastic road marking paint with glass beads, exceeding 10cm width or girth, hot applied on road surface mechanically conforming to BS-3262 and according to the specification laid down by IRC and MOST (Ministry of surface transport) specification 803 Vol -III.complete all as specified and directed.

Material and labour for painting lines, dashes, arrows, letters, etc. on roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise specially provided complete all as specified.

Supply and fixing mild steel framed work as in door chowkats, gate of angle or other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (includig steel sheeting or other covering, running rails & guides) and hanging also fastening and fixing complete all as specified.

Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and as directed.

Material and labour for brick work with subclass ‘B` old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4), complete all as specified and as directed.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surface in cm (1:4) rendering is to be finished even and fair without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

Note:- Amount of credit of Rs. 5400.00 for retrieved materials is mentioned in Schedule of Credit Page No. 20 of tender documents in pdf form which will be deducted offline while acceptance of tender.

ABDUL MAJID BHAT

M/S Bhat Contractors

M/s Mushtaq Ahmad Bhat