SPECIAL REPAIR TO STN FIRE SECTION AT 24 ED MANAURI

Amount

Demolition of Brick works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed by the Engineer-in-Charge.

M & L for brick work with subclass “B” Old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed by the Engineer-in-Charge.

Taking down cement plaster or cement lime plaster on brick or stone walls etc.Including raking out joints ,hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified & directed.

M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified & directed.

M & L for rendering 10 mm thick on other than fair face of brick walls or concrete surface in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified & directed.

M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified & directed.

M&L for preparation of new surface of wall and applying two coats of cement based paint over a coat of primer complete all as specified & directed.

M&L for preparation of old surface of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of old surface of walls and applying two coats of oil bound distemper complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site complete all as specified and directed .

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each and removing from site complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer in charge.

S & F sheet glass ordinary quality 5 mm thick in squares n exc 0.5 sqm each and glazing with oil putty/rubber gasket complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed .

S&f anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe 410 -W (GdeE- 250) quality 'A' complete all as specified and directed .

M & L for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of hollow pressed steel frame, fixing of holdfast etc complete all as specified and directed by Eng-in-Charge.

M & L for Cutting out bricks,forming toothing for,and bonding new into old work including value of new materials entering old walls and jointing and pointing in cement mortar 1:6 (measured on vertical face in contact with old wall only) complete all as specified and directed by Eng-in-Charge.

S&F 30 mm thick flush shutter, solid core constructions with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F second class hardwood Glazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M & L for preparation of new steel surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old steel surface exceeding 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new wooden surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old wooden surface exceeding 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

Material & labour for false ceiling made out of 600 x 600 x 4 mm thick non asbestos fibre fire resistant cement building board/ designer E- board with all finishes, made out of powder coated GI sheet main runner section of size 38x24x0.40 mm and cross tee of size 28x24x0.40 mm and angle size 24x24x0.40 mm including 3 mm GI wire for suspending bolts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required complete all as specified & directed by Engineer in Charge.

S&F in repairs 300 mm ordinary rat tail pattern springs including rod roller and with roller plate complete all as specified & directed.

S&F Aluminum anodised barrel tower bolt of extruded section and fixed 125 mm long complete all as specified and directed.

S&F Aluminum handle of cast type anodised 150 mm long complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extrude section or cast aluminium complete all as specified and directed.

S&F floor door stopper, over all length of cover plate 140 mm of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to door shutter complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

M & L for coloured Non skid joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed .

All as per item no 36 above but as in dado,skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat/rendering in CM 1:4 complete all as specified and directed .

M & L for glazed ceramic coloured tiles 300x450mmx7mm thick with colour & design as per direction of Engr in charge, fixed in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick in cement plaster 1 : 4 as backing coat for fixing tiles complete all as specified and directed .

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed .

S&F in repair 15mm bore Bib taps, cast copper alloy chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

M & L for GI Tubing medium grade 15 mm bore of pipe, with all fitting and fixed complete to walls, ceilings or laid in floors including taking down old pipe complete all as speicified and directed.

M & L for GI Tubing medium grade 20 mm bore of pipe, with all fitting and fixed complete to walls, ceilings or laid in floors including taking down old pipe complete all as speicified and directed.

S&F anti monkey protection net,cricket net, bird net with strong nylon strings 8mm string size heavy, in any colour and size as approved by Engineer in charge including taking down old existing net any type complete all as specified and directed .

Demolition of cement concrete (reinforced ) of any description and in any position compete all as specified and directed.

M & L for reinforced cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in lintels, shelves,covers slabs etc complete all as specified and directed by the Engineer-in-Charge.

M&L for mild steel deformed TMT bar 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc complete all as specified and as directed.

M & L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing complete over and including 20 mm thick screed bed or bedding layer in cement plaster 1 : 4 for laying floor finishes complete all as specified and directed.

Demolition of Stone slabs , tiles, interlocking tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M & L for Machine cut polished kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, grinding, rubbing and polishing over and including 20 mm thick screed bed or bedding layer in cement plaster 1 : 4 for laying floor finishes complete all as specified and directed

M/L for Machine cut kota stone slab 20-25 mm thick in riser laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in cement plaster 1 :3 for laying as in dado, skirting, riser complete all as specified and directed .

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed .

S&F in repair Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity 500 ltr including ball brass valves, high pressure, with polythelne float and fly nut in 20 mm bore complete all as specified and directed.

S&F in repair 15mm bore stop valve fancy type , cast copper alloy chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, laid in trenches or in walls complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm dia complete all as specified and directed.

S&F in repair PVC waste pipe 32/40mm dia 610 mm long suitable for WHB or sink complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Eng-in-Charge.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate,as in foundation, filling & mass concrete as in sub base to floor etc complete all as specified and directed by Engr-in-charge.

M & L for 150mm thick Cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) in flooring including necessary formwork complete all as specified and directed by Eng-in-Charge.

S&F forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, thickness of concrete slab 150mm complete all as specified and directed.

S&F Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘A’ complete all as specified and directed.

M & L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) in Plinth Protection etc. complete all as specified and directed by Eng-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over sand cushioning complete all as specified and directed by Eng-in-Charge.

Fixing only Machine pressed precast concrete interlocking paver block complete all as specified and directed by Eng-in-Charge.Note : Old interlocking paver block retrieved from demolition of interlocking tile shall be reused.

M&L for sand filling as in floors spread, leveled and rammed including watering complete for interlocking paver block complete all as specified and directed by Eng-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Eng-in-Charge.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Eng-in-Charge.

M&L for providing 150 mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in floor, finished even and smooth without using extra cement including necessary formwork complete all as specified and directed by Engr-in-charge.

Dismantling of AC (corrugated/semi corrugated) sheet/PGI/CGI sheet as in roof covering including ridges complete all as specified and directed.

S&F Pre-painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self taping screws complete all as specified and directed.

Fixing only Pre-painted galvalume sheet/ AC (corrugated/semi corrugated) sheet complete all as specified and directed. Note : old sheet obtained after dismantling of AC (corrugated/semi corrugated) sheet/PGI/CGI sheet shall be reused.

S&F Pre-painted galvalume sheet aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge or similar work fixed with self tapping screws complete all as specified and directed.

M&L aluminium peg set of 6, solid body,125mm to 175 mm made on 6 to 8 mm thick both side prelaminated particle board 200mm wide and spacing at 150mm c/c and fixed to wall complete all as specified and directed by the Engineer-in-Charge.

Taking down carefully (aluminium) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

Material and labour for point wiring including fixing on concealed on surface of wall and steel structure/ truss etc rigid non-metallic PVC conduit pipe medium grade, ISI marked heavy duty in size 20 mm dia, with 1.5 Sqmm insulated unsheathed, FRLSH multi stranded copper conductor cable, confirimg to IS 694 single core 1100 volt grade with flush cast iron/ pressed steel/ PVC modular terminal boxes (as per site) of suitable size for fixing of modular accessories such as switches, sockets and fan regulators etc including modular cover plate in required modules and colour and including FRLSH insulated & unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 Sqmm as continous earth wire complete including making good the disturbed surfaces for the followiing:- Note;- Quoted rate shall be included cost of modular terminal box , cutting, chasing, plastering , colouring etc to surface of wall / beam/ roof etc matching with existing surface including required modular blank plate to be cover/ fill up the extra blank gap/ space of modular cover plate/ mounting board in required module /make / model etc. (2) The cost of modular cover plate with frame as S&F shall be paid against respective items of this schedule.

One light / Fan point/bell point controlled by one way independent switch.

One 2/3 pin 5 Amps socket outlet point on same board controlled by one switch.

One 2/3 pin 5 Amps socket outlet point on independent board controlled by one switch.

All as per above item No 76 here in before but point wiring for 2/3 pin 5 Amps socket outlet independent using 2.5 Sqmm copper cable FRLSH for phase and neutral and 2.5 Sqmm as earth wire complete all as specified and directed.

All as per above item No 76 here in before but power point wiring for 3/6 pin 16 Amp socket out let independent using 4 Sqmm copper conductor cable FRLSH insulated unsheathed and unsheathed copper conductor of 4 Sqmm as earth wire complete all as specified and directed.

Supply and fixing modular switch, one way 6 Amps 1 way module complete all as specified and directed.

Supply and fixing modular switch, one way 16 Amps 1 way module complete all as specified and directed.

Supply and fixing modular 2/3 pin 6 Amp socket outlet 2 way module complete all as specified and directed.

Supply and fixing modular socket outlet 16 Amp 3/5 pin , 2 way module complete all as specified and directed.

Supply and fixing modular bell push 6 Amps 1 way module complete all as specified and directed.

Supply and fixing modular type power unit single phase 220 volts 32 amps socket and control switch 4 module complete all as specified and directed.

Supply and fixing white cover plate with frame 2 module complete all as specified and directed.

Supply and fixing white cover plate with frame 3 module complete all as specified and directed.

Supply and fixing white cover plate with frame 4 module complete all as specified and directed.

Supply and fixing white cover plate with frame 6 module complete all as specified and directed.

Supply and fixing white cover plate with frame 8 module complete all as specified and directed.

Supply and fixing modular Fan step regulator 120W, 2 way module complete all as specified and directed. Note applicable for item no 79 to 90- The colour, make, model of modular accessories shall be approved by AGE(I) in writing

Supply and fixing bell ding dong type AC 230 volts complete all as specified and directed.

Supply and fixing ceiling rose surface type 65 mm x 50 mm, 2 to 3 terminal complete all as specified and directed.

Supply and fixing LED recessed mounted 2'x2' luminiare 36 watt energy saving low glare high power mounted/rest over false ceiling grid incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out old unsv fittings complete as directed.

Supply and fixing LED recessed mounted downlight LED 12 W light fitting energy saving low glare high power incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out old unsv fittings complete as directed.

Supply and fixing LED tube light fitting with frame, driver etc in 20 W 4 feet long white colour mounting on two Nos of PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking down old unsv fitting complete as directed.

Supply and fixing LED tube light fitting with frame, driver etc in 10 W 2 feet long white colour mounting on two Nos of PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking down old unsv fitting complete as directed.

S&F in replacement of anglular base plate type PVC holder with 10 Watt LED bulb including taking down old one complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED street/ Bldg security light fittings 60 watts energy saving incl bracket, making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings and mounting bracket made out by GI pipe light grade in 25 mm dia of bore in required length bend in 120 degree fixed with clamping of surface of wall using clamp made out by GI strip in size 32 x4 mm using nut bolt and washer etc including taking down old fitting complete all as specified and as directed.

Material and labour for sub main wiring with Two runs of single core PVC FRLSH IS-694 cable with colour code unsheathed multi-stranded copper conductor of size 10 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe 25 mm dia medium grade heavy duty with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 10 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Three run of 10 sqmm cable and one run of PVC conduit pipe shall be measured agaist one unit. (ii) Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

Material and labour for sub main wiring with Two runs of single core PVC FRLSH IS-694 cable with colour code unsheathed multi-stranded copper conductor of size 6 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe 20 mm dia medium grade heavy duty with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 6 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Three run of 6 sqmm cable and one run of PVC conduit pipe shall be measured agaist one unit. (ii) Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

Supply and fix sheet metal enclosure distribution board TPN, 4 poles ,double door, 4 way with 200 Amps rated copper bus bar vertical type including MCCB 4 pole 100 Amps 415 volts thermal magnetic base operated 16 KA as incomer with neutral link and maufacturer by OEM incl concealed in surface of wall and making all connection using gland , thimbles in required size including taking down of old unserviceable DB with accessoires complete all as specified and directed. Note : Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

Supply and fix sheet metal enclosure for MCB distribution board SPN, double door, 8 way with 200 Amp rated bus bar 230 Volts concealed in the surface of wall including taking down of old unserviceable DBs with accessories complete. Note : Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

Supply and fixing MCB , SPN 230 volts , 40 Amps , "C" Curve 10 KA complete all as specified and directed.

Supply and fixing MCB , single pole 230 volts , 6-32 Amps , "C" Curve 10 KA complete all as specified and directed.

Supply and fixing ceiling fan in size 1200 mm sweep white colour BEE 5 star rated copper wound energy saving with set of sweep/ extension rod /"U" clamp and other accessories single phase 50 Hzs incl making electric connection using three core copper cable drawn through in PVC flexible conduit pipe including taking down old ceiling fan and depositing to MES store yard complete. Note : Quoted rated shall be included the cost of GI clamp made out strip in size 32 x6 mm with nut bolts washer etc Note :- Old ceiling fan shall be deposited to MES store yard of AGE(I) Manauri .

Supply and fixing wall mounted fan / air circulators heavy duty 450 mm sweep non capacitor bracket mounted type copper wound motor ISI marked BEE 4 star rated energy saving with fixing accessories complete making necessary electric connection including taking down old wall mounted fan / air circulators and depositing to MES store yard complete all as directed. Note :- Old wall mounted fan shall be deposited to MES store yard of AGE(I) Manauri.

Supply and fixing exhaust fan 300 mm sweep steel body heavy duty with louver mounting bracket ISI marked BEE 4 star rated energy saving less noise capacitor type including plastering, colour coating etc and all site required work for disturbed surface matching with existing and making electric connection using three core copper cable drawn through in PVC conduit pipe including taking down old exhaust fan and depositing to MES store yard complete all as directed. Note:- Old exhaust fan shall be deposited to MES store yard of AGE(I) Manauri .

M&L in replacement earthing complete with galvanized steel earth plate 600 x600 x 6 MM thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtrs below normal ground level, connected to galvanized GI strip 32 x 6 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 40 mm bore for protection of GI strip from earth electrode and 15 MM as watering with wiremesh funnel charcoal dust, common salt, PCC (1:2:4) type B-1 using 20 MM graded stone aggregate for chamber and MS angle iron frame 40 x 40 x 3 MM and RCC cover 40 MM thick (1:2:4) type B-1 using 20 MM graded stone aggregate reinforced with 6 MM dia round bars @ 75 MM C/C both ways with MS handle 12 MM dia , PGI funnel and wire mesh , 20 MM bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I (2010) and connected to earth test point including testing complete all as specified and directed. Note : Quoted rates shall deemed to be included the cost of GI strip upto 7.5 Mtr and required earth work..

M/S R S Traders (BID ID -3188577)

PRATAPGARH CONSTRUCTION CO. (BID ID -3197519)