Addn/Altn to Bldg NO P-118, P-119 and provn of car parking shed adjacent to Bldg No P-26 at Bharatpur Mil Stn

Amount

M&L for surface dressing n. exc.15 cm deep in soft/loose soil complete all as specified.

Excavation in trenches, not exceeding 1.50 meter wide and not exceeding 1.50 meter in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 square meter on plan and not exceeding 1.50 meter in depth and getting out in soft/ loose soil complete all as specified.

All as per item No 2 above but depth exc 1.5m and not exc 3.0m complete all as specified.

M&L for hardcore of broken stone or boulder of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified .

M&L for Cement concrete in foundations, filling and mass concrete type D2 1:4:8 using 40 mm graded stone aggregate including compaction of concrete, curing etc complete all as specified.

Form work to sides of concrete foundations, foottings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar works; vertical or to batter for rough finished surfaces complete all as specified.

RCC M-25 in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc; basement slabs, under reamed piles and mass concrete complete all as specified.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

S&F mild steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified.

All as item No 8 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified.

Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified.

M&L for Reinforced cement concrete (design mix M-25) in columns, pillars, piers, posts and struts complete all as specified.

Brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6 meter mean radius built in cement sand mortar 1:6 . complete all as specified.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/ loose soil complete all as specified.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified.

M&L Reinforced cement concrete (Design Mix, M-25) in beams, cantilevers, bressummers, lintels over 1.50 meter span complete all as specified.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified.

M&L for Reinforced cement concrete (Design Mix, M-25) in chajja complete all as specified.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping complete all as specified.

M&L for RCC M-25 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for RCC M-25 for Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter to curved portion complete all as specified.

M&L for Rendering 15 mm thick in CM (1:6) on stone masonry surfaces or surface other than fair face of brick-work or complete all as specified.

M&L for rendering 5 mm thick cement sand mortar 1:4 using water proofing compound @ 3%, over 10 mm thick rendering in cement sand mortar 1:6 as in plaster to external surfaces of walls finished even & smooth without using extra cement complete all as specified.

Supply only Integral waterproofing compound complete all as specified.

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of cement concrete surfaces of ceiling of chajjas/roof protection etc complete all as specified.

Material and labour for preperation of surfaces and applying three coats of white wash to ceilling complete all as specified.

M & L Preparation of new decorated plastered unplastered surfaces surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over 3 mm thick wall care putty on Wall Surface using with alkaliresistant priming paint complete all as specified.

All as aitem No 28 above but on ceiling surface complete all as specified.

Material and labour for preperation of surfaces and applying two coats of exterior emulsion paint weather proof over a coat of primer to walls complete all as specified.

Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing in CM 1:4 inskirting/dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L for 75 mm thick PCC type D-2 1:4:8 using 40 mm graded stone aggregate as in sub base under floor over rammed earth complete all as specified.

M & L for PCC 30mm thick 1:2:4 Type B-0 using 12:5 mm graded stone aggregate as in sub base of floor complete all as specified.

M&L for Vitrified ceramic tiles 9 -10 mm thick (square/ rectangular) polished (double charged), area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 20mm thcik screed bed in CM 1:6 complete all as specified .

M&L for Vitrified ceramic tiles 9-10 mm thick (square/ rectangular) polished (double charged), as in skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thcik screed bed in CM 1:4 complete all as specified and directed.

Material and labout for filling under floors or in foundation including watering and consolidation etc complete all as specified.

Material and labour 50mm thick PCC type C-2 1:3:6 using 40 mm graded stone aggregate as in plinth protection complete all as specified.

M&L for screed bed or bedding layer 15 mm thick in cement mortar 1:4 mixed with water proofing compound as per manufactoring instruction, finished even and smooth without using extra cement @3 % WPC Shall be meashured and paid seperatly complete all as specified.

M&L Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the rati of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete all as specified.

M&L for removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point in soils complete all as specified.

S & F powder coted Anodised Aluminium frame for door,windows, vantilators with one or more rebates including joining cleats for fixing etc complete all as specified.

S&F powder coated Anodised aluminium window and ventilators shutters,side hung type without sash bars,aluminium section weighting 0.55 kg/m including necessary joining cleats,glazing clips,rubber packng,anodised aluminium snap beading,screws,anodised aluminium fitting such as peg stays 150mm long 1 nos ,hinges type B-21 100 mm long 2 Nos suitable handle 1 Nos complete all as specified.

S & F Figured glass,3mm thick pin head type and glazing in squares n exc 0.5 sq. m in each pane complete all as specified.

S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheeet reinforced with m.s. squre tube complete all as specified and directed.

Supplying & fixing in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and shown of SSR 2020 (Part-II) complete all as specified.

S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked complete all as specified.

S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed complete all as specified.

S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked, complete all as specified.

Supply, jointing & tersting steel water tubing, medium grade ISI marked galvanised with and including necessary pipe fittings/accessories like sockets, unions tees, elbows ,cutting chases etc and fixed to or concealed in walls and ceiling or laid in floors, complete of following sizes:-

15mm bore

20mm bore

S & F 15mm bore bib taps, fancy type cast copper alloy chormium plated with crutch or butterfly handle, screwed down screwad for iron pipe or for brass ferrule and fixed complete all as specified.

S &F Rotational moulded polyethylene water storage tanks 500 Ltr (cylinderical vertical with closed top)with ball brass valves,high pressure 20mm , with polythene float and flynut complete, hoisted and fixed in position complete all as specified.

S&F for Single piece-WC with UF Soft Close Slim Seat Cover, Fixing Accessories, fccessories set and Dual flush Cistern incl. all Fittings, Size: 370x670x720 mm, S Trap-300mm complete all as specifies (Make;- Jaquar Registered design LYS-WHT-38851S300UFSMN or eqv in Perryware , Hindware )

S & F 20mm bore,Gun metal gate valve painted, finish with forged brass spindle and iron wheel head, screwed both ends internally complete all as specified.

S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified.

S & F 15mm bore angle Cock chromimum plated complete all as specified.

S&F in viterous china Table Top Basin with CP waste coupling, Size: 565x425x140mm complete all as specifies (Make;- Jaquar Registered design KUS-WHT-35935 or eqv in Perryware , Hindware )

S&F in Brass Chromium plated central hole basin mixer without popup waste system with with 450 mm long braided hoses complete all specified. (Make;- Jaquor cat part no QQP-7167BPM 10101 or eqv in Perryware , Hindware )

S&F Vitreous China Urinal half stall type , Make Jaqour Model No URS-WHT-38851S 220UF or equivalent white with grating and union for discharge pipe incl providing & fixing plugs ,bedding urinal against wall in CM 1:2, securinal urinal to plugs with & incl 60mm long brass screws complete all as specified.

S&F Brass Chromium plated Bib Cock with Wall Flange complete all specified. (Make;- Jaquar cat part no DRC-37037 or eqv in Perryware , Hindware )

S&F waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including 32mm PVC waste pipe for WHB complete all as specified.

S&F MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap complete all as specified.

S&F aluminium anodised tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified.

M&L cast iron nahani trap of 75mm bore complete all as specified.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, ISI marked of 75mm bore complete all as specified.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, ISI marked of 110mm bore complete all as specified.

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 75mm bore complete all as specified.

S & F 110mm PVC (SWR) bend complete all as specified.

S & F 110mm PVC (SWR) junction single, (SingleT) equal or unequal with access door complete all as specified.

S & F 110mm PVC (SWR)branch pipe, (SingleY) equal or unequal complete all as specified.

S & F 75mm PVC (SWR) bend with access door complete all as specified.

S & F 75mm PVC (SWR) bend complete all as specified.

S & F 110mm PVC (SWR) vent cowl complete all as specified.

S&F Hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.2 Meter Long Spirochrome flex tube & Wall Hook complete all as specified. (Make;- Jaquar cat part no ALD-587 or equivalent.

S&F Towel Ring Square with Round Flange complete all as specified (Make;- Jaquar cat part noACN-1121Nor eqv in Perryware , Hindware )

S&F Soap Dish Holder complete all as specified & as directed (Make;- Jaquar cat part noACN-1131N

S&F For Toilet Roll Holder with Stainless Steel Flap complete all as specified. (Make;- Jaquar cat part noACN-1153S or eqv in Perryware , Hindware )

S&F Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified. (Make;- Jaquar cat part no ACN-1181S or eqv in Perryware , Hindware )

S&F for Corner Glass Shelf (with Bracket Complete all as specified. (Make;- Jaquar cat part no ACN-1173 or eqv in Perryware , Hindware )

M&L for providing precast cement concrete 1:2:4 type B1 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves, and similar articals with plain faces including chamfers, weatherings, throatings etc and set in cement mortar 1:4 complete with joints to match complete all as specified.

M&L for 150 mm bore reinforced cement concrete pipe , class NP-3 laid & jointed complete with collars in cm(1:1) with spun yarn & tested . Complete all as specified.

Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified.

M&L for surface excavation n.exc. (Not exceedings) 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified.

M&L Cement Concrete Type D-2, 1:4:8 using 40mm stone graded aggregate 100mm Thick as in sub base complete all as specified.

M&L for 80mm thick & M-40 factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould/rubber molded, laid in required colour & pattern over and including 25mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as specified. including taking down old unservicable existing pever block.

Fixing only for 80mm thick & M-40 factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, complete all as specified. including taking down old unservicable existing pever block.

M&L factory made precast PCC solid block (1:2:4) type B-1 using 20mm graded stone aggregate as in kerb stone of size 300mmx300mmx150mm setting in cm (1:4) etc complete all as specified.

M & L For Hardcore (Broken stone and boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified.

Excavating in post holes ( or similar holes ) each n. exc 0.5 Cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers n.exc 25 cm watering , removing surplues soil to a distance not exceeding 50mtr and making good surface complete all as specified.

M&L For PCC 1:3:6 Type C2 using 40mm grade stone aggregate as in foundation complete all as specified.

S & F of structural Mild steel tubes hot finished tubes work in built up tubular (round, square or rectangular hollow tubes etc.) trusses,purling ,rafter ,post etc., including cutting, hoisting,wlding ,grinding, fixing in position , welding and bolted with special shaped washers etc. complete also including cost of material ,fixtures ,labours cahrges & Machienery complete all as specified.

S&F for chequred or plain MS plates, channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment to grade Fe-410W E-250 quality complete all as specified.

M&L preparations of newly steel surface and applying two coast of synthetic enamel paint over a coat of primer complete all as specified.

Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified.

M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of primer with hand roller complete all as specified and as directed by Engr-in-Charge complete all as specified.

M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n.exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 25mm thick compacted bed of sand and filling the joints of paver block complete all as specified.

M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in rigid PVC conduit pipe size not less than 20mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size SS / MS shunken/metal flush box for mounting of flush type/modular fittings like switches, sockets, fan regulator etc including 1.5 Sqmm PVC insulated but unsheathed copper earth continuity conductor (in green color) to common earth and connedcted to earth dolly complete all as specified for the following :-

One light point controlled by one way switch.

One ceiling fan/wall fan/exhaust fan point controlled by one way switch.

One 3 pin 6 Amp socket point outlet on the same board with other switches

One 3 pin 6 Amp socket point outlet on the independent board

All as per item No100 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps switch socket outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly.

S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board complete all as specified.

S & F Lamp holder, PVC/polycarbonate type with cord grip cap suitable for pendant fitings complete all as specified.

S & F stepped type electronic fan regulator flush type 230 volt, 100 watt on the existing phenolic laminated sheet etc. complete all as specified.

S&F socket outlet 2 in 1, 3 pin 5 Amps multi purpose flush type 230 volt complete all as specified.

S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified.

S&F switch socket combination 3 pin 16A, flush type complete all as specified.

M&L submain wiring complete with 2X 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor and one run of 4 Sqmm copper cable for earth continuity conductor and including rigid PVC conduit with all PVC accessories fixed on concealed surface complete all as specified.

Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the following DBs complete all as specified.

8 way SPN with 200 amps rated busbar 240 volts (double door type).

S&F MCCB/MCB 415/240 volts fixed in DB's of the undermentioned type and rating complete all as specified. Note: Make of MCCB/MCB should be same of DB.

MCB SP 6-32 Amps, 240 volts,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)

MCB SPN 40 Amps, 240 volt,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)

Supply and fixing LED 20 watt LED tubelight fitting retro fit type with replacable rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified . cat No LCTLN-20-CDL make: Cromption or equivelent in Phillips/Surya/Helonix/Havells

M&L bracket light fitting wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base. complete all as specified. Cat No- LHFOECE1TZ10014 Make: Havells or equivelent in Cromption/ Bajaj etc

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified.

Supply and fixing of Electric storage water heater of 25 liter capacity whirl flow technology 2000W rated power 5 star rating, energy saving, high density PUF insulation 8 Bar pressure, heating indicator, adjustable knob for mannual setting of temp, safety valve, vertical mounting including wall mounting fastner bolts 04 Nos and 02 flexi connecting pipe of length upto 60cmPRCD plug (shock safe) complete all as specified. Make: Havells Monza Slim or equivant in Bajaj/Indoasian.

M & L earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15 mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on completion complete all as specified. Note :- The cost of funnel pipe of 20 mm GI light grade pipe and protection pipe of 15mm bore GI light grade is deemed to be included in quoted unit rate.

Demolition of Concrete in ground floors and pavings not exc 15cm thick( below or above ground floors) complete all as specified .

M&L for sand cushioning to under ground cable provided with layer of sand complete all as specified. Note : Punned thickness shall be measured

Supply and laying of sub class 'B' bricks in trenches over cables for protection cover across the length of cable complete all as specified .

M&L for driling hole in hard standing / road for laying of pipe for protection of cable etc by adopting method of horizontal manual drilling (trenchless technology) without disturbing the top surface or cutting and making good the disturbed surface to the existing surface complete all as specified.

Supply and laying in replacement of GI tube light grade 40 mm bore complete all as specified.

Taking out and Supply & laying LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sqmm 4 core sizes in trenches /passing through pipes/ on poles etc complele all as specified.

Supply & laying 25mm GI pipe medium grade with all fittings laid in trenches complete all as specified. Note: Item rate to be quoted include the rate of connection to main DI/GI pipe line

Supply & laying 20mm GI pipe medium grade with all fittings laid in trenches complete all as specified.

Supplying & fixing gun metal gate valves with iron wheel head,screwed both ends for iron pipe, ISI Marked of 25mm bore complete all as specified.

PD GUPTA AND COMPANY

B R ENTERPRISES

M/s Ranaji Construction Co