Balance work of Guest House Civil work

P & L in position reinforcement cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 12.5/20 mm nominal size) including the cost of centering shuttering upto Floor V Level but excluding cost of reinforcement in:- Columns, walls including attached pilasters buttresses etc. Beams (straight or curved), rib of coffers, lintels, brackets, suspended floors, roofs (any slope), water tank, slabs of coffers, landings, balconies, shelves chajjas, vertical and horizontal fins individually or forming box louvers band, facias and eaves boards lintels, bands plain window cills, staircases and spiral staircases, arches, arch ribs, domes, vaults shells, folded plate, staircase steps including waist slab, folded steps etc. All work upto floor V level. Nothing extra shall be paid for additional height of form work.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .Thermo-Mechanically Treated bars of grade Fe-500D or more ( @ 90 Kg/Cum)

Brick work with F.P.S brick of class designation 75 in foundation, plinth and in super structure including cost of scaffolding, curing etc complete. All work upto floor V level. In cement mortar 1:6 ( 1 cement: 6 Coarse sand)

Half brick masonry with brick of class designation 75 in foundation, Plinth & Superstructure in Cement mortar 1:4(1 cement : 4 sand) including cost of scaffolding, curing etc complete . All work upto floor V level.

Extra for providing and placing in position 2 Nos. 6mm dia MS bars or equivalent at every third course of half brick masonry (with FPS bricks)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Sal wood ( Sample to be got approved by the Engineer -in- charge)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using Second class teak wood and 4 mm thick glass panes including black enamelled ISI marked M.S butt hinges with necessary screws. ( Sample of wood to be got approved by the Engineer -in- charge)

Providing and fixing 35mm thick Second class teak wood wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws ( Sample of wood to be got approved by the Engineer -in- charge) .

Providing and fixing 35mm thickISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Providing & fixing glass panes, with wooden fillets Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing and laying Cement concrete 1:5:10 (1cement: 5 coarse sand: 10 graded Brick aggregate 40mm nominal size) in under flooring including machine mixing, consolidation, curing and Centering, shuttering/form work complete.

Providing and laying Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished without a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 in colour as specified by the Engineer In Charge , laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.( Sample to be got approved by the Engineer -in- charge) In colour such as white, ivory, rey, fume red brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 13753 of minimum thickness 5 mm of approved make in colour as specified by the Engineer In Charge of size 300 x 450mm in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. ( Sample to be got approved by the Engineer -in- charge)

Providing and fixing gang saw cut thick mirror polished machine cut for kitchen platforms, vanity counters facias, steps of stair case and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, polishing to edge to give high glossy finish etc. complete at all levels. Granite of colour and shape as specified by the Engineer In Charge 16 mm thick ( Sample to be got approved by the Engineer -in- charge) are of slab upto 0.5m2

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing 6mm thick cement plaster to ceiling of mix in ratio 1:3 (1 cement : 3 coarse sand)

10-15 mm thick cement plaster 1:4(1cement : 4 coarse sand) in single coat on rough/fair side of single or half brick walls for interior and exterior plastering including making grooves (in between brick masonry and RCC work) scaffoldings etc. complete. All work upto floor V level.

Finishing plastered surface with white cement based Putty of average thickness 1mm of approved brand & manufacture including sand papering and preparing the surface even and smooth (two or more coats) complete job. Nothing extra shall be paid on account of scaffolding/ form work etc. All work upto floor V level. ( Interior & Exterior work )

Finishing walls with acrylic smooth exterior paint of required shade and make on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) All work upto floor V level. (Sample to be got approved by the Engineer -in- charge) .

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats (Sample to be got approved by the Engineer -in- charge) .

Providing gola (Angular Fillet) 75 x75mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diamete

Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: a. 250x10 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm

Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry

Supply and filling of dry brick aggregate in sunken portion 40mm nominal size.

Providing & Fixing of 3 mm thick Aluminium Composite Panel over frame work of 25 x 40 mm hollow section of spacing as per the requirement at site of approved brand & make including the cost of all required acessories , labour , wastage etc. complete. (Sample to be got approved by the Engineer -in- charge) .

Providing and laying in position cement concrete of grade 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Crushed Stone aggrigate including the cost of centring and shuttering - All work upto floor V level

P & F floor mounted, white vitreous china single piece, water closet including cistern of capacity 10 litres all fittings and fixtures with seat cover,complete in all respect . ( Cera Clayton 220/ Jaquar Solo ceries)

P & F white vitrous Wash basin chinaware (Table top) CERA 570 x 420 mm )

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved quality) Complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and laying PVC pipes of 4 kg/cm2 pressure including all PVC fittings (bend, collar, tee) jointing with adhesive, including laying & embedding in cement concrete 1:3:6 all arround the pipe ap per the standard design ( 100 mm thick all Arround ). (Astal/Supreme/Finolex make) Nothing extra shall be paid .a. 100 mm dia

b. 75 mm dia

Providing and fixing plain bend of required degree .a. 100 mm

Providing and fixing Door bend of required degree. a. 100 mm

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts & nuts complete.a. 100 x100x100mm

b. 75x75x75mm

Providing and fixing Collar: a. 100mm

P&F Cowl 100 mm

Providing and fixingPVC floor trap 100mm inlet and 100 mm outlet

Cutting holes in brick masonry walls/RCC roof for passing pipes (C.I/G.I/P.V.C) upto 150mm dia and making good the same with Brick masonry 1:4/RCC 1:1½:3 as required:-

Providing and fixing C.P towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of Jaquar make (Code No. 1111N)

Providing and fixing G.I. pipes (medium grades) complete with G.I. fitting and clamps, including cutting chases and making good the walls etc. wherever required (Concealed / Exposed). Parkash Surya / Gindala. 15mm dia nominal bore

b. 20mm dia nominal bore

c. 25mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work). 32mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 25 mm nominal bore

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc complete (new work)a. 15mm nominal bore

b. 20mm nominal bore

c. 25mm nominal bore

d. 32 mm nominal bore

Providing and placing on terrace (at all floors levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank [Sintex/Star having valid ISI license].

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931a) 15 mm nominal bore ((Make Jaquar-059KN)

Providing and laying cement concrete of specified grade. Cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 crushed stone aggregate 20mm nominal size) around PVC / CI pipes including bed concrete as per standard design (100 mm thick all around) For 75mm/100mm diameter pipe under floors (Internal work)

Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded crushed stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:- With F.P.S. bricks with class designation 75 Inside size 90x80cm and 60cm deep including fixing Angle iron frame 65x65x6mm with hold fast and covered with precast RCC Manhole cover 1:2:4 of required size including cost of reinforcement as required.

P&F Water motor 2 H.P (Crompton/Servo Make)

Providing and fixing G.I. Tank nipple size 1" to 2" for connection complete in all respects.

P&F of Check Valve for motor 32mm nominal bore of approved quality.

Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510x1040mm bowl depth 250mm

P & F concealed body for single lever washbasin wall mounted basin mixture including exposed part kit of single operating lever, wall flange, nipple and spout. Cera make CROMO series/Jaquar Florentine Series

P& F high flow concealed body diverter for single lever bath tub spout and shower connection including exposed part and concealed part . Cera make CROMO series/Jaquar Florentine Series

P&Fof unplasticised PVC connection pipe with brass union 45 cm length & 15 mm nom. bore.

P & F waste coupling 32 mm S S full thread 125 mm long

P & F bath tub spout with wall flange exposed part . Cera make

P & F over head rain shower square 200 x 200 mm including overhead shower arm 305 mm with wall flange Cera

P & F Stainless Steel 304 grade towel rack 600 mm long Meridien grade Cera make

P & F single towel rail S.steel 304 grade 450mm long Meridien grade Cera make

P & F towel ring S.steel 304 grade Meridien grade Cera make

P& F S. Steel 304 grade toilet paper holder Meridien grade Cera make

P & F Hand jet for EWC ABS body with SS braided pipe & wall hook Cera make

P & F S. Steel 304 grade Soapdish Meridien grade Cera make

P & F P.V.C. waste pipe for sink or wash basincomplete:Semi rigid pipe 32/40 mm dia

P/F door locks with handle of superior quality

P/F Glass partition in washrooms using 10mm thick plain toughned glass including cost of connectors, top rail (SS), brackets (SS) long and short, stopper etc including making necessary holes, screws, labour charges etc complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade

Providing and laying matt finished vitrified tile of specified size having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. 300x300x9.8 mm

Supply labour for different works a. Mazdoor

Plumber Second Class

Carpentor

Engage trolly for five days

Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately.GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; madeof G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. (30'-0'' x 30'-6'')