SPL REPAIR TO MAIN DRAIN AROUND 390 SUP DEPOT 666 COY ASC TCP 1 2 3 AT HISAR MIL STN

Amount

Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge.

Material and labour brick work with old size sub-class ‘A’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified.

Material and labour brick work with old size sub-class ‘A’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 but except bricks (bricks obhtained from item No 1 will be used) complete all as specified and directed.

M&L for cleaning of all deposited slit/ soil/ vegetation/ plants etc. in main drain and culverts including pipes and removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete, sub base of drain channel complete all as specified ad as directed.

M&L cement concrete (1:3:6) type C1 using 20 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement Note : Forming fair finished channel for drain using extra cement shall be measured and paid for separately.

M&L keyed pointing to brick walls in cement mortar 1:3 complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in cill, coping steps, seismic and other similar courses, lacing courses, parapet and railing upto 60cm ht, kneelers, kerb and like including weathering slightly rounded or chamfered angl and throating including necessary formwork, complete all as specified and directed.

Dismantling of reinforced concrete drain pipes of size 300mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Dismantling of reinforced concrete drain pipes of size 450mm to 600mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.

M&L for 450mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.

M&L for 600mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.

M & L concrete bed to drain pipes including packing under and completely surrounding pipes of size 300mm with concrete after they are laid and tested in CM 1:3:6 type C2 complete all as specified and directed.

M & L concrete bed to drain pipes including packing under and completely surrounding pipes of size 450mm with concrete after they are laid and tested in CM 1:3:6 type complete all as specified and directed.

M & L concrete bed to drain pipes including packing under and completely surrounding pipes of size 600mm with concrete after they are laid and tested in CM 1:3:6 type complete all as specified and directed.

M & L for cement concrete Type D2 (1:4:8) (using 40mm stone graded aggregate) as in foundations, filling and mass concrete, sub base of culvert complete all as specified and as directed.

M & L for preparing new plastered or unplastered surfaces of walls and applying two coats of white wash over one coat of primeer complete all as specified and as direceted.

M&L for mild steel TMT bars 10mm dia & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia, complete, all as specified and directed.

Ditto, but 6mm to 8mm dia.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete.

M&L reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like. Note :- Reinforcement & formwork shall be measured and paid for separately.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar works of Gde E-165(Fe 290) including welding etc. complete all as specified & as directed.

Material and labour preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L rendering 10 mm thick in CM 1:4 on wall surfaces of any description and finishing the surface even and fair complete all as specified and direceted.

M&L for pre-cast cement concrete block masonary with solid blocks of proc 1:3:6 type C-1 exc. 10 cm in width and setting in cement mortar 1:6 etc complete all as specified and directed

malik constructions (BID ID -3285956)

M/s INDER CONSTRUCTION COMPANY (BID ID -3286604)

NEW AMRITSAR CONSTRUCTION COMPANY (BID ID -3290015)

M/S Sulakh Brothers (BID ID -3289983)

M/S D.N Choudhary (BID ID -3286275)

M/S RAJINDER SINGH (BID ID -3286219)

M/S RAJESH KUMAR & SONS (BID ID -3289724)