Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹25.1 L+₹3.1 L (14.2%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹25.3 L+₹3.3 L (15.2%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
28 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS PIN-913869 C/o 99 APO
REPAIR TO PCC FLOORING, HARDSTANDING / PAVEMENTS, PLASTERING AND BRICK WORK IN LOWER LEIMKHONG MIL STN.
2023_MES_605567_1
8518/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹44,000
Yes
26 Oct 2023
24 Jun 2023
29 Jul 2023
24 Jun 2023
28 Jul 2023
14 Jul 2023
Amount
Schedule 'A'
Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for incl removing the debris out side the premises of MoD land of deposting at low laying area complete all as specified and directed.
M&L for cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (20mm graded stone Agg) as in coping incl necessary formwork etc complete all as specified and directed.
M & L for 75 mm thick cement concrete type C-2 1:3:6 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed by the Engineer-in-Charge
M&L 100 mm thick plain cement concrete type B 1, 1:2:4 (using 20mm graded stone agg) as in flooring and finishing the cement concrete surface even and smooth without using extra cement with spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed .
M&L for broken stone hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.
M/L PCC (1:2:4) type B1 using 20mm graded stone aggregate as in benching , surface channels and drains complete all as specified and directed.
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered /stopped ends etc. complete all as specified and directed.
Demolition of RCC of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition).incl removing the debris out side the premises of MoD land of deposting at low laying area complete all as specified and directed
M&L RCC (Nominal Mix) Type B1, 1:2:4(using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for reinforced cement concrete (nominal mix) Type B1, 1:2:4 (using 20mm graded stone aggregates) for beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. Note :- Reinforcement and form work required shall be measured and paid seperately.
M&L formwork to sides and soffits of floor or roof beams and lintels, cantilevers, overhangs etc for flat and fair finished surfaces complete all as specified and directed.
M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 15 above but 5mm dia and over upto includig 10mm dia in stirrups spacers complete all as specified and directed.
M&L for preparation of old concrete floor lite and stone surfaces and making a smooth surfaces and applying two coat of floor coat Emulsion platanium series paint weather proof over a coat of water thinable cement primer complete all as specified and directed. Note :- (1) Make :- INDIGO , DR FIXED and EQUIVALENT .
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.
Ditto all as per Sl item No. 19.00 here-in-above but except brick (NOTE: Seviceable brick obtained from demolition under Sl item No 18.00 here-in-above shall be reused under the item)
Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water complete all as specified and directed.
M & L Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface fair and evenwithout extra using cement complete all as specified and directed.
M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
S&F in repair 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls for weep holes as directed complete all as specified and directed.
Dismantling floor, hearth , chequred tiles, interlocking tiles tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment complete all as specified and directed.
M&L for precast cement concrete chequred tiles (ISI approved) of size 300mm x300mm x25mm thick, set and jointed and pointed in neat cement slurry in floor with grey cement and pigment including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.
M&L for endura tiles (out door) 10 mm thick set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 15 mm thick sreed bed in CM 1:4 complete all as specified and directed.
M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
M&L for Preparation of old surfaces of concrete of any description over 10cm girth or width, not otherwise described apply one coat of synthetic enamel paint all as per directed by Engr-in-Charge.
M&L for 300mmdia reinforced concrete pipes class NP-2 laid and jointed complete with collars complete all as specified and directed.
SHARMA ENTERPRISE
Manipur Steel Industries(INDIA)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .