PROVN OF CERTAIN NEW WORKS OF BR EM NATURE AT MH CQAEE AUNDH AND AUNDH MIL STN UNDER GE MH RH KIRKEE

Amount

Surface dressing n exc 15 cm deep insoft soil.

Surface dressing n exc 15Cm deep in hard/dense soil

Excavating over areas in loose soil n exc 1.5 m deep in foundation, etc. or for shafts, wells, sump, cesspits, manholes, pier holes, etc. and getting out all as specified

Excavating in post holes (or similar Holes ) each not exc 0.5 cum, getting out in hard/ dense soil, returning, filling in & ramming earth in layers not exc 25 cm thick watering & removing surplus soil to a dist not exc 50 m & making good surface all as specified and directed.

Excavation in trenches n exc 1.50m wide and n exc1.50m depth for foundation, man hole etc and getting out in soft soil.

Excavation in trenches n exc 1.50m wide and n exc1.50m depth for foundation, man hole etc and getting out in hard/dense soil.

Returing filling in including spreading leveling watering well ramming in layers n;exc 25cm thick with soil obtained from excavation in any type of soil

Removing excavated surplus material (soil) n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point

Removing excavated soil material exc. 250 m but n exc. 500 m and depositing where directed from starting point all as specified

Cutting opening in cement concrete/ PCC block walls with or without reinforcementn(any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping

Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surface of concrete- flat all as specified and directed.

Mild steel TMT bars 10 mm dia and over, cut to length bend to shape require incl cranking bending spirally for hooping for columns hooking ends and binding with the incl mild steel wire (annealed) not less than 0.9 mm dia

S & F MS TMT bars 6 to 8mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for cols, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

All as per item No 16 above but 6 to 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for RCC M30 (20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for RCC M30 (20mm graded aggregate) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses

M&L for RCC m 25 (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves

M&L RCC M25 ( Design Mix ) (20mm graded aggregate ) as in beams, cantilevars, bressummers, lintels over 1.5m span all as specified and directed

M&L Reinforced cement concrete M25 (Design mix) (20 mm graded aggregate) as in chajjas all as specified.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete all as specified

M&L Providing cement concrete 1:3:6 type C2 40 mm graded aggregate as in foundation filling and mass concrete all as specified and directed.

M&L PCC 1:2:4 type B-2 using 20mm graded agg as in coping hold fast block bed bolck filling pressed steel door frame, etc all as specified.

M&L for providing cement concrete type C0 1:3:6 (12.5mm graded aggregate) as in filling of chowkat,coping all as specified

M & L 75mm thick cement concrete type B-1, 1:3:6 ( 20mm graded aggregate ) as in path , paving and finishing cement concrete surface fair and even as spd by EIC.

M & L for PCC 1:3:6 type C1 (uisng 20mm graded aggregate) 75 mm thick as in Plinth, Path, floor with fair finish surface with out using extra cement all as spd.

M & L for PCC 1:4:8, type D2 (40mm graded aggregates) as in sub base of floor/pavement, 75mm thick all as specified and directed.

M&L for PCC 1:2:4 type B1 ((20mm graded aggregate) as in floor of 100mm thick all as specified and directed.

M & L 25mm thick Cement Concrete 1:2:4 type B-0 using 12.5mm graded stone aggregates flooring finished even and rough to receive topping layer all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with Grade 'A' sealing compound all as specified.

M&L for PCC solid block masonary exc 10cms in width built in CM 1:6 of grade 1:3:6 all as specified.

M & L brick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

S & F MS angle iron in fencing posts & struts including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets ( for securing wire mesh etc) including all necessary, drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe-310-0 all as specified and directed.

S & F bands, straps, stay/hooks, pintle hinges for gates & similar articles conforming to Fe-410-0 or Fe-310-0 all as specified and directed.

S & F framed work as in doors or gates of angle or other section with gusset plate, rails, braces etc, complete drill for fixing steel sheeting or other covering etc including necessary welding, riveting, nut bolting etc all complete conforming to Gde Fe-410-S all as specified and directed.

S& F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde-E-250) quatily.

S& f girder or single stanchions, built up of one beam or channel section with flange plate, caps, bases, splices, angle brackets, cleats and other connectionof Fe-410-W (Gde-E-250) quatily.

S& f rolled mild steel work for curved roof frame using any sections of steel all as specified & directed by Engr - In - Charge

S&F of Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W(Gde-E-250) all as specified.

S & F 10 mm dia MS round bars for tightening of chain link fencing woven through chain link & fitted completely all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F 15 mm dia of shank Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

S&F galvanised 2 strand barbed wire 2.24mm dia of wire and 2mm dia of barbed at 75mm spacing and straining and fixing to any type of strandre nails straining bolts, including securing or tying at crossing with and provn of galvanised MS wire staples or steel pins etc as specified.

M&L Welded steel wire fabric weight n. exc. 4 kg per sqm supplied and fixed complete to wood or steel members

S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

All as per item No 48 above but bent to a curve of any radius.

M&L for Hardcore of gauge n exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified

Taking down cement plaster in any description incl racking out joints hacking for key and scrubbing down with water etc. Spd and directed by EIC

M&L for Rendering 05mm thick, on fair faces of brick work or concrete surfaces of ceiling in CM 1:3 finished even and fair without using extra cement all as specified and directed by EIC

M&L for Rendering 10mm thick, on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even and smooth without using extra cement all as specified and directed by EIC

M&L for rendering 10mm thick on fair face of brick or concrete surface of walls in CM 1:4 finished all as specified and directed by EIC

M&L for Rendering 15mm thick, on fair faces on block masonry surfaces or surfaces walls in CM 1:4 inclding WPC finished even & fair all as specified and directed by EIC Note : WPC shall be measured and paid separatly

M & L for rendering 15 mm thick on fair faces of block masonry surfaces in cement plaster 1:4 all as specified and directed

M & L rendering 15mm thick on internal surface on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth (without using extra lime or cement) as in vertical surfaces all as specified and directed

Supply only water proofing compound

M&L for Gypsum board false ceiling with 10 mm thick fixed with machine screws on 0.5 mm thick grid work, main joist made out of GI, C-channel 40mm wide, piaced at 900mm to 1200mm c/c & secondary joist made out of 50mm wide flat GI at 600mm C/C with GI angle of 25X25X0.25 mm suspenders from ceiling to the grid at 750mm C/C, tiles and joints shall be finished with gypsum plaster to achieve smooth surfaces complete all as per manufacturers specification including two coats of oil bound distemper over one coat of alkali resistant primer all as directed.

S&F POP Decorative cornice 100 mm size of approved design and pattern fixed along wall and ceiling junction, all as specified.

Dismantling Stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc.

M & L ceramic non skid coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm in floors etc.as in floors etc laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile surface all as specified and directed.

S & F glazed ceramic coloured tiles 350x250mmx7mm/450X300X7 mm thick conforming to IS 13712 Gde BII(b) set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar 1:4 as in skirting and dado all as specified and directed.

M&L Granite 20mm thick polished in platforms and support like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit all as specified as directed by EIC

S&F of Machine pressed precast conctete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade

M&L ,for Sand cushening under paver block ,including watering and consolidation etc complete.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frame) all as specified

S&F powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S & F Pressed steel door frame for doors with one or more rebate incl necessary fixing lugs, hinges lock strike plate, etc complete as specified size 125 x 60mm

M & L for flush shutters 35mm thick solid core constructions with block board core , ply wood face panels commercial type on both side as spd.

S & F 30 mm thick 2nd class H.W glazed or skeleton shutter open rebated divided intosquare with plain chamfered or rounded mitred and rebated with out sash bar andprepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR pt-1

S & F Solid PVC door frame factory made of size 50mmx 47mm made out of 5mm PVC sheet single side prelaminated & edges will be painted to match, reinforced with MS Square tube jointed , supplying and fixing in opening complete all as specified and as directed .

Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single side prelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification complete all as specified and as directed.

S&F medium weight MS butt hinges 100mm long, all as specified and directed.

M & L for aluminium anodised barrel tower bolts of extruded section and fixed150 mm long all as specified and directed.

M & L for aluminium anodised handles for doors 150 mm long fabricated type all as specified and directed by Engr-in-carge.

S & F aluminium anodised sliding door bolt plate type,no tless than 12 mm dia with and incld aminimum of 6 bolts andnuts, 4 on bolt plate and 2 on stapleplatelengthof bolt 300 mm fixed to door shutter/frame all as directed by Engr-in-charge.

S& F 75 mm Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

M & L cast iron floor trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 in repaired all as specified and directed by Engineer-in -Charge.

S & F PVC (SWR) Pipes single socketed in any length with rubber ring joints 110mm bore fixed to walls/laid in trenches etc as directed by EIC

S & F PVC (SWR) Pipes single socketed in any length with rubber ring joints 75mm bore fixed to walls/laid in trenches etc as directed by EIC

S & F PVC SWR Bends 75mm radius as directed by EIC

S & F PVC SWR Bends 110mm radius as directed by EIC

M&L PVC(SWR) gully trap 125/100 mm, setting and joined with solvent cement etc

S & F ,wash down water closet ( European type) including fixing bolts, sheet cover and including connecting to existing out let pipe etc all as specified and directed.

S & F PVC High/Low level flushing cistern 10 litrescapacity including all fittings I.e float valve, syphon, flushpipe,brackets all as specified and directed by EIC.

S & F Wash basins ovel type, vitreous China (flat back ) ,Size 400X360X180mm cat. No. S2020106 snow white including brackets,15mm dia fency type pillar taps and waste pipe of 32mm dia all as specified and directed by EIC.

S & F vitreous China wash basin, white, flat, blak, size 550 x 400mm including cutting and pinning in ends of brackets all as specified and directed by Engineer-in -Charge.

S & F viteous china urinal, half staff complete including providing and fixed plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe all as specified and directed

S & F PVC flexible waste pipe of standard length 25mm dia with PVC cap suitable WHB waste coupling all as specified and directed

S & F PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed by EIC.

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified

S&F of Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)

S&F of Soap dish, vitreous China white, approximate size 160x 160x90mm all as specified and directed

S&F of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S & F brass cp mixer 15mm dia. for mixing hold and cold water screwed down for iron pipe and fixed all as specified.

S & F stop valves CP Brass screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm dia all as specified and directed.

S & F 15mm bore stop valve fancy type, cast copper alloy screwed down, chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed.

supply and fixing 40mm Stop valves, cast copper alloy,screwed down,high pressure with crutch or butterfly handle,,screwed both ends for iron pipe or for unions and fixed all as specified and directed

supply and fixing 20mm Stop valves, cast copper alloy,screwed down,high pressure with crutch or butterfly handle,,screwed both ends for iron pipe or for unions and fixed all as specified and directed

S & F steel water tubings medium grade galvanised fixed complete to walls and ceilings or laid in floors 15 mm dia pipe all as specifiedand directed by EIC.

S & F steel water tubings medium grade galvanised fixed complete to walls and ceilings or laid in floors 20 mm dia pipe all as specified and directed by EIC.

S & F grating dome 125mm dia with waste hole of PTMTminimum weight 40 grams all as directed by EIC

S&F rotational moulded polyethylene water storage tanks of capacity 1000 ltrs ( cylindrical vertical with closed top) hosted and fixed in position all as specified in SSR part-I (2009) and as directed by EIC

All as per item No. 106 above but 500 lit capacity

S&F ball brass valve 20 mm dia high pressure with polyethylene float and fly nut for following bore of pipe, complete all as specified

S&F bib taps 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and directed .

S&F pillar taps 15mm bore dia, fancy type, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed by Engineer – in – Charge .

S&F gun metal globe or gate valves 20 mm dia ,with iron wheel head,screwed both ends for iron pipes

S&F CP 15mm bore 2 way bib cock Make Jaquar catloag no.CON 041 KN etc complete.

S&F Health faucet brass chromium plated ISI Marked,including connecting decorative pipe and all accessories required for fixing of 15 mm bore of pipe all as specified and directed.

S & F 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipes or connections including necessary packing union and cap.

S&F of Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union

M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling all as specified.

M&L preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper paint over a coat of alkali resistance primer ,all as specified & directed.

M&L for preparaing newly plasered surfaces of walls including preperation of surfaces and applying two coat of cement base paint on walls over one coat of alkaliresistant priming paint surfaces complete .

M&L for preparaing old plasered surfaces of walls including preperation of surfaces and applying one coat of cement base paint on walls of any height all as specified and directed.

M&L painting to wooden surfaces of any description over 10 cm width or girth incld prepration of new surface and applying two coat of synthetic enamel paint over one coat of pink primer all as spd.

M & L preparing steel new surfaces and applying two coats of synthetic enamel paint over a coat of red oxide/zinc chrome primer over 10 cm in width or girth.

M&L for PCC 1:4:8 type D-2 (40 mm gde agg) as in concrete bed to drain pipes including packing under and haunching against sides of pipes with concrete after they are laid and bedded dia of pipe 150 mm all as specified.

S&F of Reinforced concrete pipes of 150mm dia, class NP2, laid and jointed complete with collars all as specified.

Demolition of cement (unreinforcement) Concrete of any description and in any position not otherwise specifically provided for

M&L for Cement concrete type B1 1:2:4 (20 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including columns ,pillars and post including necessary formwork all as specified.

S&F of punched tape concertina coils of 450mm dia and connecting to angles all as spd

M&L for point wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through non metallic rigid PVC conduit and accessories in surface of walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes to provision of Modular switches to house switch/regulators etc including Modular Plate and Covers for one fan/light point controlled by one switch complete all as specified and directed.

All as per item No 127 above but for one switch socket outlet 5 Amps on independent board complete all as specified and directed.

All as per item No 127 above but for for one socket outlet 5 Amps on the same board complete all as specified and directed.

All as per Item No 127 .here-in- before but with 2.5 Sqmm PVC insulated multistranded copper conductor with 2.5.0 sqmm cable as earth continuity conductor for Power Socket/AC/Geysers on independent board on the existing Concealed conduit complete all as specified and directed.

Supply and fix modular switch 1 way 6A, 1 module, ISI Marked complete all as specified and directed.

Supply and fix modular socket 6A 2/3 pin combined 2 module, ISI marked complete all as specified and directed.

Supply and fix modular socket 16A 2/3 pin combined 2 module, ISI marked, complete all as specified and directed.

Supply and fix modular switch 1way 16A 1 module, ISI marked, complete all as specified and directed.

Supply and fix ceiling rose surface bakelite with three terminals, ISI marked, complete all as specified and directed.

Taking down unserviceable submain wiring and M&L for submain wiring in PVC conduit with two runs of 4 sq mm and one runs of 4 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS 694) drawn through and including 25 mm dia PVC rigid connduit heavy grade ISI marked (IS 9537 Part III) includung accessories such as bends, supports etc all as specified and directed. Note: Two runs of 4 sq mm and one runs of 4 sqmm cable along with conduit shall be measured as one length.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth

M & L taking down serviceable under ground XLPE cable of any size and type without damaging the existing cable and re-laying as directed by Engr-in-Charge. Note: Earthwork measured and paid separately.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 06 sq mm 2 core laying in trenches/floors/walls etc all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 06 sq mm 4 core laying in trenches/floors/walls etc all as specified and as directed.

Supply and fix building security light LED 36 Watt PDC aluminium housing with sealed toughened glass cover, SMD LED driver with secondary lens including suitable dia of GI Medium grade pipe for fixing LED fitting with required size of nuts, bolts, washers and grouting on wall of any type all as specified and directed by Engr-in-Charge.

Supply and fix LED panel 2' x 2' of 36 watt suitable for recessed / ceiling mounted all as specified and directed by Engr-in-Charge.

Supply and fix LED 1 x 22 watt white powder coated CRCA box type LED industrial batten with glass tube fix on wall or ceiling all as specified and directed by Engr-in-Charge.

S & F LED post top garden light 20 W aluminium housing, clear acrylic diffuser, cast aluminium pole -cap complete with accessoires with suitable all as specified and directed by Engr-in-Charge. Make : Crompton Cat log no-LPTH-20-WW or eqvilant in philips/ Jagwar/ Havells.

M & L for LED post top triangular, with cast aluminium housing with acrylic diffuser bollard light of 9 W all as specified and directed by Engr-in-Charge. Make :Crompton cat part No -LBLA3-10-CDL

Supply & fix Heavy duty metal exhaust fans, AC single phase 230/ 240 V of size 300 mm sweep with louver including core cutting if required and make surface good all as specified and directed by Engr-in-Charge.

Taking down old unserviceable Vertical TPN distribution boards MCCB as incomer S & F CRCA Sheet steel, powder coated, ready to use Vertical TPN distribution board provided with insulated vertical phase ubs-bars/ neutral bars with shrouds earth bars sticking saddles, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates and circuit identification labels with provision of 100 Amps MCCB as incomer, SP/TP MCBs as outgoings IP 54 Double door DB 06 way, connect earth terminal with earthing all as specified and directed.

S & F MCB DB SPN 8 way of any size and capacity double door type horizontal with 200A busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and directed.Make: Hager/Schneider/ L & T

Supply and fix sheet moulding compound(SMC) Junction box size 140 x 140 x 95 mm inner dimension, Hinged door, 32 Amps 2 pole baklite terminals and MCB SP 2 Amps for street light control mounted on pole with the provision of cable entry and exit including necessary clamp, bolts, nuts, washers etc.

M & L for sheet metal enclosure for DB 2 way single door fxed on pole/wall as specified and directed.

M & L for sheet metal enclosures for DBs Triple pole and neutral 4 way, double door with 200 Amps rated bus bar complete.

Supply and fix 3 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 16 KA on VTPN distribution board and making required connection all as specified and directed by Engr-in-charge.Make: Hager/Schneider/ L & T

S & F MCB SPN 32 Amps on existing panel/ MCB DB all as specified and as directed.

S & F MCB SPN / Isolator 40 Amps on existing panel/ MCB DB all as specified and directed

S & F MCB SP of capacity 2Ams to 40 Amps A all as specified and directed.

M & L for fixng MCB TP/Isolator 32 Amps all as specified and directed.

Supply and fix MCB SPN 40A - 63A all as specified and directed.

M& L Pole coping with PCC 1:3:6 size 200x200x200mm , rendering with extra cement of no cost, one coat of white wash with lime all as specified and as directed.

M&L for old size 230 x113 x 75 mm brick Class 'B' for protection of under ground cable all as specified and directed.

M & L for riddled earth for cushioning including spreading, levelling and hand punning to under ground cable in trench all as specified and directed. Note: Punned thickness shall only be measured and paid.

supply and fixing 2 core 1.5 sqmm copper wire for pole wiring from sintex box to the post top light all as specified and as directed

Supply and laying GI tubing light grade of size 50 mm dia for road crossing and building rising for cable protection.

supply and fixing of 80 mm GI pipe medium grad for post top garden light fixed in PCC 1:2:4 all as specified and directed.

M&L for road cutting / foot path and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) of 150mm X 100mm inrespect of width and thickness complete all as directed by Enger -in- charge.

M & L for Taking down old earthing and M &L for earting with galvanished steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground (earth pit not less than 3.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvanished earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover, 20 mm dia (MG) GI watering pipe with funnel wire mesh and protectin pipe of GI of suitable size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 5 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution board and all as directed. Note: Rate for achieving required depth by compressor machine if required is deemed included in unit rate.

Supply, install,testing and boring Submersible pump, electric driven 415 V, TP suitable for 100/50 mm dia bore well supply and Install complete minimum 74 mtr head , 95 LPM discharge , PVC casing pipe of suitable size, clamps for holding pumps and DOL starter.Make C& S cat part no -100w37RJ5TP

M & L for three core PVC insulated, submersible pump cable of size 4 Sqmm laying in trench/wall all specified and directed. all as specified and directed by engr in charge.

Supply and fixing for LED Solar street light fitting 36 Watt including galvanized steel pole (09 Mtr) in built,lithium ion battery, solar panel, charge controller with dusk down sensor complete all as specified and directed by Engr in Charge. Note : Excavation & earth work shall be measured separately.

Supply and laying cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm x 4 core all as directed by Engr-in-Charge.

M & L forlight grade GI pipe of size 80 mm dia ISI marked for cable protection complete all as specified and directed by Engr-in-Charge.

Supply and fix steel tubular swaged poles type 410 SP-31 (9.0 meter long) complete with CI base plate and finial including foundation and coping all as directed by Engr-in-Charge.

M&L for taking down unserviceable convential street light fitting and S&F Engergy saving DPSD dimmable LED street light 60 watt with dimmaing options of 30%/50%/70% at pre-determined time slots. Various dimmable, housing made from cast aluminium toughened glass, IP 65 complete & wired (Pole box to streetlight fitting as per site requirement) with all accessories. Make: Shakti cat No SZPSPM060DIM or equivalent.

Supply and fix sheet moulding compound (SMC) Junction box size 185x165x60 mm inner dimension, Hinged door, including three phase 100 Amps 4 pole baklite terminals and MCB SP 2 Amps for street light control mounted on pole with the provision of cable entry and exit all as directed by Engr-in-Charge

Kute Construction

V.R.PRAJAPATI AND CO.