REPAIR TO JOINERY, FLOORING AND OTHER ALLIED BR ITEMS IN MARRIED ACCOMODATIONS AT SANYAT LINES, KARAM VIHAR, TIGRIS ROAD, SUMERIAN LINES MOUDE ROAD AND TO CERTAIN UNITS IN THE AREA OF AGE BR III UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each and removing from site, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each and removing from site, complete all as specified and as directed.

Taking down shutters not exceeding 1.0 Sqm each and removing from site, complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 Sqm and not exceeding 2 Sqm each and removing from site, complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6 using old size bricks, including demolition of old brick work built in cement mortar, complete all as specified and as directed.

Pressed steel frames size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow portion of frame with PCC 1:3:6 Type C-0 using 12.5mm graded crushed stone aggregate etc., complete all as specified and as directed.

Pressed steel frames size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow portion of frames with PCC 1:3:6 Type C-0 using 12.5mm graded crushed stone aggregate etc., complete all as specified and as directed.

Factory made flush shutter 40mm thick, Solid core construction with Block board and plywood face pannels, commercial type on both sides, complete all as specified and as directed.

Factory made 35mm thick second class hard wood for plain framed panelled shutters (any number of panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS: 1003(Part 1), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Glazed and Skelton shutters using 2nd class hard wood, 35mm thick open rebated and prepared to receive glass or gauge etc., edges of framing plain and chamfered or fitted with cut or mitered beads for securing glass or gauze, size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS squqre tube. complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.

18-19mm thick Prelaminated Particle board, interior grade, prelaminated with decorative choice laminations on both faces, fixed to timber frame work Kitchen Cabinet/Cupboard shutters, sides, shelves, top and bottom or in any other position in cup boards, complete all as specified and as directed.

12mm thick Prelaminated Particle board, interior grade, prelaminated with decorative choice laminations on both faces, fixed to timber frame work Kitchen Cabinet/Cupboard shutters, sides, shelves, top and bottom or in any other position in cup boards, complete all as specified and as directed.

100mm size butt hinges (medium weight) colled rolled mild steel and fixed, complete all as specified and as directed.

Extruded aluminium alloy handles fabricated type anodised of size 150mm size, complete all as specified and as directed.

Mild steel pressed oval type handles stove enamelled black for doors 150 mm size, fixed in repairs, complete all as specified and directed.

Mild steel barrel tower bolt stove enamelled black with bright bolt 200 mm size, fixed in repairs, complete all as specified and directed.

Aluminium anodized 150mm size barrel tower bolt of extruded section, complete all as specified and as directed.

Aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300mm size, fixed in repairs, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and as directed.

Welding in repairs to hinges/hold fasts/window frame and to other iron articles of windows and doors as directed by Engr-in-Charge inclusive of all welding materials, each weld shall be of length not exceeding 200mm, complete all as specified and as directed by Engr-in-Charge. (Note : The work shall be carried out in multi stpried building and quoted rates shall be inclusive of this aspect.)

Aluminium alloy powder coated (50micron) anodised auminium door frame section 100mm x 44mm x 2mm thickness ,shutters of aluminium section ofsize 85mm x44mm x2mm thick Top rail and both styled of size 100 mm x 44mm x 2mm thick lock rail and bottom rail of size 115mm x 44mm x2mm thick including aluminium anodised snap beading and rubber packing & 5.50mm thick frosted designer glass (as approved by GE) including 100 mm size alm butt hinges 04 Nos each leaf 200mm size tower bolt ,.200 mm long fancy type alm handle -02 Nos on each leaf, 4 lever brass 100mm size mortice lock and suitable door closer /floor spring heavy duty for each leaf (Make -SMRAT/SADHU) complete all as specified and directed.

Anodized aluminum alloy powder coated standard hollow section with special powder coated coloured of any tint window frame with one glazed shutter (fixed) and two Nos. glazed with 5.5mm thick tinted glass of superior quality and wire gauzed shutter with stainless steel wire cloth 0.36mm nominal dia wire and 1.4mm average width of aperture of sliding type, made out of Jindal sectionaluminium section as per series A (15mm) three tracks, including aluminum alloy powder coated grill and snap type beading, aluminium powder coated handle and barrel tower bolt with glazing clips and jointing cleats, rubber gasket complete ame/chowkhat with following specifications including anodized aluminum snap beading, channels, 5mm thick tinted glass, glazing clips joint cleats, rubber gasket and other accessories etc., complete all as specified and directed

Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar , aluminium section weighing 0.55 kg/m including necessary joining cleate , glazing clips, rubber packing , anodised aluminium snap beading screws etc., complete all as specified and as direced.

Box type Steel windows with double shutters (inside for wiremesh & out side for glass), hinges, steel handle, tower bolt and steel peg stay complete with glazing bars dovetailed or welded including a coat of red oxide after preparation of surface before fixing all as shown in drg No. TD-A sheet 1/3 to 3/3, complete all as specified and as directed.

Box type Steel windows with double shutters (inside for wiremesh & out side for glass), hinges, steel handle, tower bolt and steel peg stay complete without glazing bars dovetailed or welded including provision for AC/desert cooler opening and cover including a coat of red oxide after preparation of surface before fixing all as shown in drg No. TD-A sheet 1/3 to 3/3, complete all as specified and as directed.

Rolled sections as in roof trusses (framed), trussed purlins, rafters, standing poles, crane gantries, rails and fastenings and heavy brackets framing including distance pieces, cleats etc., conforming to Fe-410W Gde E- 250 quality A including dismantling structural steel work of any description not otherwise provided for, complete all as specified and as directed.

Mild steel framed work as in doors (as in chowkats) or gates of angle or other section with gusset plates, rails, braces etc., exclusive of steel sheeting or other covering, hanging or fastening and fixing complete conforming to Gde Fe-410-0 or Fe-310-0 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

1.00mm thick mild steel, plain & black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc. as required, complete all as specified and as directed.

Mild steel framed work as in grills, gratings etc., with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar work, complete conforming to Fe 290 Gde-E-165 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering, complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering, complete all as specified and as directed.

Water proofing treatment comprising of the following, using APP membrane polymer based to roof slab including taking down existing water proofing treatment of any type complete all as specified and as directed:- (a) 10mm thick screed bed in cement mortar (1:3) in patch work wherever rrequired over existing roof saurface. (b) Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.4Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. (c) Applying APP based polymeric membrane minimum weight 3.6kg/Sqm and of minimum thickness 3mm, reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm). APP membrane will be laid by torching overlaps with a propane or butane gastorch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. (d) Over the APP membrane after laying apply a coat of solar reflective bituminous aluminum paint @ 0.15Kg/Sqm.

E-board 'Everest' make 600mm x 600mm x 4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24mmx32mmx3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200mmx600mm modules cross tee longer than 600mm to be supported independently. 600mmx600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19mmx19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.

75 mm thick plain cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub base finished even and fair including demolition of existing PCC unreinforced, in ground floors and pavings not exceeding 15cm thickness below or above ground level,, complete all as specified and as directed.

Pre-polished coloured chequered cement concrete tiles, factory made, Premium quality 250mm x 250mm x 25mm thick, set, jointed in neat cement slurry and pointed flush with grey cement and pigments to match colour of blocks in floors over 15 mm thick screed bed or bedding layer in cement mortar 1:4, including dismantling of exisiting chequred Concrete tiles of any type with bedding layer, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made, any shape and size conforming to IS- 15658- 2006 of 80mm thick, M-40 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with no pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, including dismantling of exisiting interlocking Paver blocks of any type, complete all as specified and as directed.

Machine cut kota stone slab 18-20 mm thick as in flooring laid over and including cement screed base of 15mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including dismantling old stone slab flooring with screed, complete all as specified and as directed.

Vitrified coloured ceramic tiles dark shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Vitrified coloured ceramic tiles dark shade 10mm thick (square/rectangular) polished, as in vertical surfaces shuch as skirtings/dados/ risers of steps, pillars, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including backing layer of 10mm thick in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Anti skid ceramic coloured tiles 300mm x 300mm and 7-8mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4, including dismantling of exisiting chequred Concrete tiles of any type with bedding layer, complete all as specified and as directed.

Anti skid ceramic coloured tiles 400mm x 400mm and 7-8mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4, including dismantling of exisiting chequred Concrete tiles of any type with bedding layer, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 300mm x 200mm and 7-8mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick backing layer in cement mortar 1:4, including dismantling of exisiting chequred Concrete tiles of any type with bedding layer, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 450mm x 300mm and 7-8mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick backing layer in cement mortar 1:4, including dismantling of exisiting chequred Concrete tiles of any type with bedding layer, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, including taking down old cement plaster, hacking for key and scrubbing down with water, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, including taking down old cement plaster, hacking for key and scrubbing down with water, complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over a layer of birla white/JK white wall care putty, complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer, complete all as specified and as directed.

Preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds, moss efflocerent salts and treading oil and greasy spots and applying two coats of Oil bound distemper over a layer of birla white/JK white wall care putty, complete all as specified and as directed.

Preparing old plastered or unplastered surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds, moss efflocerent salts and treading oil and greasy spots and applying two coats of cement based paint on walls, complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide complete all as specified and as directed.

Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified.

Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

NOTE:- For minimum fair wages, EPF and payment to labour employed, refer Sch A Note No-17,18 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

The new hut furnitures

Simran construction Company