Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-Finance 0 JANAI JANAI CHANDITALA HOOGHLY WEST BENGAL 712304 UDYAM WB 07 0059321 | HOOGHLY | WEST BENGAL | 712304 | ₹8.4 L | L1 | Accepted-Finance L1 Bidder |
| 2 | L2₹8.5 LRejected-Finance | ₹8.5 L | L2 | Rejected-Finance Bid is Not L1 |
| 3 | L3₹8.6 LRejected-Finance 17 MOHYIAR 1ST BYE LANE JIGACHA HOWRAH 711112 | HOWRAH | HOWRAH | WEST BENGAL | 711112 | ₹8.6 L | L3 | Rejected-Finance Bid is Not L1 |
Tender Value
₹8.7 L
EMD Value
₹17,391
Closing Date
15 Jan 2026, 1:00 pmClosed
Executive Engineer PWD Howrah Electrical Division
Office of the Executive Engineer PWD Howrah Electrical Division Onkarmal Jetia Road Howrah 711103
Repair and renovation work of electrical installation at G 2 portion of A Block, EIJE , Dalalpukur, Howrah - 711104.
2025_WBPWD_971681_1
WBPWD/EE/HED/NIT- 32 (2nd Call) of 2025-2026
Open Tender
ELECTRICAL WORKS ORG
30 days
A Block, EIJE, Dalalpukur
Please refer Tender documents.
11 documents required · 11 mandatory
₹17,391
28 Jan 2026
24 Dec 2025
19 Jan 2026
25 Dec 2025
15 Jan 2026
1 Jan 2026
Dismantling the existing ceiling fans, exhaust fans, wall fans, LED twin/single light fittings, distribution wirings, Switch boards, power boards, TPNDBs, SPNDBs, Cable tray, power cables, sub main wiring, window/split ac machines and other electrical accessories. Due to civil renovation works, keep the items under the custodian of the concern agency at the said site, for the reuse of the materials at same side after civil renovation works , keeping parity with civil work, as per direction of the EIC. [ NS]
Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 160A. [Make: L&T/Havells/Siemens] [MAIN BUILDING]. [D-3/4(a)]
Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 32A. [Make: L&T/Havells/Siemens] [MAIN BUILDING]. [ D-3/4(a)]
4 way VTPN DB with 01 nos 415 V, 100A Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting and 02 nos 415 V, 32A TP MCBs & 06 nos 16A SP MCBs of Breaking capacity 10kA & C characteristics [ D-8/10]
Supplying and fixing 4 way double door Horizontal TPN MCB Distribution board with IP-42/43 protection with 01 nos 415 V, 63A FP MCB Isolator as incomer and 12 nos 240V, 16A-32A SP MCB of Breaking capacity 10kA & C characteristics on din rail of DBs and necessary connection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as to G.S. (Make: L&T/Legrand/Seimens) [ D-10/15+ D-5/6+D-6/7]
Supply & Fixing, 250 V, 6-10A per way, 2+10 way SPN MCBDB with SS enclosure double-door with IP-42/43 protection with DP Isolators as Incoming & SPMCBs ('C' Curve, 10kA) as Outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire & Neutrallink & provision for earth attachment, 1 no 40A DP Isolator as Incoming, 10 nos 6-10A SPMCB as outgoing (Make: L&T/Legrand/ Seimens) [ D-9/13+ D-5/6+D-6/7]
Re- fixing double door sheet steel (16SWG), powder coated TPN DB horizontal DBs /SPNMCBDBs / VTPNMCBDBs enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. [NS]
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish Avg. run 6 mtr. [ E-14/2(c)]
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (FINOLEX/POLYCAB/RR KABLE/HAVELLS) in 19mm bore 3mm thick polythene pipe complete with all accessories embedded in wall to 240V 5A 3 pin plug point incl S&F 240V 5A 3 pin flush type plug socket & Piano Key type switch (Anchor make) incl. S&F earth continuity wire fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick flushed in wall and incl. painting the MS box and mending good the damages to original finish. On Board [ E-10/4(a)]
Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (ANCHOR) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.[E-6/22]
Re- Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (ANCHOR) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.[NS]
Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (ANCHOR) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.[E-7/25]
Re- Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (ANCHOR) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [NS]
Supply & Fixing 240 V, 2x6A, plug socket with separate 2x6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [ E-3/10(c)+ E15/14(a)+15(a) ]
Re- Fixing 240 V, 2x6A, plug socket with separate 2x6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [NS]
Supply & Fixing bakelite / perspex top cover on existing switch board/power board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required. 150 mm x 100 mm x 65 mm [ E-4/12(b) ]
240 mm x 200 mm x 65 mm [ E-4/12 (e)]
Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 150 mm x 100 mm x 65 mm. [ E-3/10(a) ]
240 mm x 200 mm x 65 mm [ E-3/10 (d) ]
Supply & Delivery 240 Volt,50Hz,4 ft long , Max20 Watt,efficacy-100lm/w, PC body,Al housing Single LED Tube Light fittings complete with all accessories including LED Tube. [Make: PHILIPS /CROMPTON/ wipro or Manufacturer with own NABL accredited lab with valid test certificate ] [NS]
Supply & Delivery 240 Volt,50Hz,4 ft long , Max20 Watt,efficacy-100lm/w, PC body,Al housing Double LED Tube Light fittings complete with all accessories including LED Tube. [Make: PHILIPS /CROMPTON/ wipro or Manufacturer with own NABL accredited lab with valid test certificate ] [NS]
Fixing only single/twin LED light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [ C-2/17]
Fixing only single /twin LED light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener. [C-2/14(b) ]
Re- Fixing only single /twin LED light fitting complete with all accessories directly on wall/ suspended from ceiling/HW round block and suitable size of MS fastener. [ NS]
Supply & D of 240V, 50hz, 450mm sweep, speed 1400-1440 rpm wall mounted full metal body, heavy duty wall fan,[ Make. Crompton, Orient,EPC]. [Make approved by EIC] [NS]
Fixing only cabin fan by S&F 4 nos rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. and making good damages and smoth cement finish etc as practicable as possible and providing necy length of PVC insulated wire and making connection. [C-4/29]
Re- Fixing only wall fan by S&F 4 nos rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd.after making hole in wall and making good damages and smoth cement fimish etc as practicable as possible and providing necy length of PVC insulated wire and making connection. [NS]
Supply & Delivery of 240 Volt, 50Hz 65W, 200CMM,1200mm, 65W, 400RPM sweep ac ceiling fan. BEE star rated (Make -Crompton,Orient, Polar) [NS]
Supply & Delivery of 240 Volt, 50Hz 75W, 245CMM,1400mm,400RPM sweep ac ceiling fan. BEE star rated (Make -Crompton,Orient, Polar) [NS]
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [C-3/21(a) ]
Re- Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [NS]
Supply & Fixing Socket type fan regulator (Step type) (ANCHOR) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [E-6/18(a) ]
Engraving the deptt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop. [C-3/24(a)]
Extra for additional one letter incl. hifen, stroke and stop. [C-3/24(a)]
Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [D-14/29]
30 cm (12")(Speed : 1400 rpm)
38 cm (15")(Speed : 1420 rpm)
30 cm (12")(Speed : 1400 rpm)
38 cm (15")(Speed : 920 rpm)
Re - Fixing of Heavy Duty Exhaust fans on exsisting hole in wall as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:complete with all accessories.12"/9"/15" [NS]
Supply & Fixing louver shutter ( Aluminum)on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS. 30 cm (12") [ D-14/32(a)]
Supply & Fixing louver shutter ( Aluminum)on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS. 30 cm (15") [ D-14/32(a)]
2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC ( CB & PP)
2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [FOR AC M/C]
2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC (TPN to SPN)
4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC. [VTPN to TPNDB].
3x22/0.3 (1.5 sqmm) [FOR 2X6A]
Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 20 mm. [E-16/7(a)]
Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 25 mm. [ E-16/7(b)]
Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire. [E-2/3(b)]
Supply and fixing of two way PVC circular box & cover. [K-2/67]
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.[ E-5/14(a)]
Supply & Fixing 240 V 20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-5/14(b)]
Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc. [ E-5/15(a)]
Supply & Fixing 240 V, 20A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc. [ E-5/15(b)]
Supply & Fixing 240 V, 25 A, Modular type starter (NORTH WEST) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19/17]
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (NORTH WEST), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.[ E-17/5(a)]
Opening Ceiling Fan part by part Rewinding with super enameled copper wire of appropriate gauge minalux paper insulation, heat varnishing making loops S&F insulation sleeves, condenser, suitable ball bearing, bush bearing, split pin, loop coil, rubber insulator, washing , cleaning etc after cutting burnt out coil and refixing the same with testing speed of the fan as per direction of EIC. [NS]
Supply & Delivery of 1.1 KV XLPE Insulated & Sheathed Armoured Aluminium power cables [ Make Gloster /Polycab /Havells/KEI/Finolex/RR cable] . 4 core 70 sqmm. [MAIN SWITCH to BUS BAR] [NS]
Supply & Delivery of 1.1 KV XLPE Insulated & Sheathed Armoured Aluminium power cables [ Make Gloster /Polycab /Havells/KEI/Finolex/RR cable] . 4 core 35 sqmm. [BUS BAR to VTPN] [NS]
Laying of cable 4 core 70 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. [F-1/2(d)]
Laying of cable 4 core 35 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. [F-1/2(d)]
Supplying & fixing medium gauge GI Pipe ( ISI-Medium)Protection with necessary fittings and jointing metarials as required. 50 mm dia. [F-6/11]
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. 4 core 70 sqmm. [F-4/7(c)]
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. 4 core 35 sqmm. [ F-4/7 ( c )]
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 4 core 70 sqmm. [F-5/8/(b)]
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 4 core 35 sqmm. [F-5/8(b)]
Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. With 25x25x3mm angle iron support. 200x50x1.25mm (18SWG). [ D-14/34(ii)]
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and MS flat 20 mm x 3 mm on wall, 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By ISI-Medium GI pipe. [G-1/2(a)]
Excavation of soil for installation of Earth Electrode and filling & ramming. (Soft Soil) [ G-1/1( a)]
Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (NORTH WEST) & necy. Connections. [E-17/5(b)]
Supplying and fixing 4 way MCB SS enclosure with IP-20/30 protection, powder coated provision with 1 no 32 A,FP MCB on angle iron frame with nuts bolts & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. [FOR 3PH AC MACHINE IN BOARXD ROOM][ D-6/7 +D-9/11]
S & F DOL Stater ( upto 7.5 Hp), Make- L&T- SS96210, MK1 DOL 3Ø 415V, 50HZ, relay reng 9-14 amp on existing angle iron frame with nuts bolts as per direction of EIC.[NS] [FOR 3PH MACHING IN WORKSHOP]
Supply and delivery of following 1.1 KV grade XLPE armoured cables (Make:Polycab/Havells/RR Kabel/ Gloster) 2 Core 10 Sqmm. [ CAMPUS LIGHTS FROM Roof top] [NS]
Laying of cable upto 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. [F-1/2(d)]
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. 2 Core 10 sqmm [F-4/7(c ) ]
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 2 Core 10 sqmm [ F-5/8(b) ]
Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. 2 WAY. INCL. 32A DP ISOLATOR. [Make: Legrand/ABB(E)/L&T] [campus LIGHTS CONTROL] [ D-6/7+ D-9/11]
Supply and Fixing SMC Junction Boxes of dimention (250x200x100)mm with IP 67 protection (Sintex / Hensel )make for compound light. With 4pole 32A terminal stud and 6A 10KA C curve SP MCB (make-Legrand/ABB/Siemens/L&T) [FOR campus LIGHTS] [NS]
Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting [C-3/19]
Supply & Delivery of 220-240V 45W LED , efficacy-120 lm/w ,die cast, Al housing, driver rating should be higher than the fittings rating, outdoor type street light fittings . [Make: PHILIPS /CROMPTON/ wipro or Manufacturer with own NABL accredited lab with valid test certificate ] [NS]
Supply & Delivery of 220-240V 90W LED , efficacy-120 lm/w ,die cast, Al housing, driver rating should be higher than the fittings rating, outdoor type street light fittings . [Make: PHILIPS /CROMPTON/ wipro or Manufacturer with own NABL accredited lab with valid test certificate ] [ROOF TOP LIGHTING] [NS]
Fixing only street lights fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required. [C-3/28]
S&L inside Pole 3 x 1.5 Sqmm copper cable (FINOLEX/POLYCAB/RR KABLE) through 13 mm heavy gauge polythine pipe from loop box to light fittings with making neccesary. Connection. [NS]
S & F 50mm dia medium gauge 1.5mt long detachable type GI single arm bracket including carrying charges suitable for pole head.The arm bracket shall be properly welded with 15mm thick stifner plate of pole sleeve for strengthing incl. Properly fixing arrangement with the pole by bolt,nuts and washer as per direction of EIC. [NS]
S &eraction of 2 Mtr. Long 75mm dia G.I. pipe pole (ISI-Medium) with pole cap & base plate in C.C. (6:3:1) foundation of dimension 600x600x750 mm having on the roof of the building after chiping of the roof incl. 3 mm thick net cemented finish and providing G.I. earth bolt after making drilled hole etc. on pole incl. tow coats of Al paint over one coat of RO primer as per G.S. (Jindal- ISI-M/Bhusan-ISI-TATA-ISI-M). [NS]
Supply & Delivery of 220-240V 90W LED , efficacy-120 lm/w ,die cast, Al housing, driver rating should be higher than the fittings rating, outdoor type flood light fittings . [Make: PHILIPS /CROMPTON/ wipro or Manufacturer with own NABL accredited lab with valid test certificate ] [NS]
Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. [D-3/20(a)]
Supplying & Fixing 240 V AC/DC superior type 12" GONG BELL on HW board incl. S&F HW board. Approved make. [NS]
ADD GST @ 18%
ADD LWC @ 1%
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.38 MB
2911.pdf
Tender Documents • 1.86 MB
BOQ_2364105.xls
BOQ • 0.71 MB
Download all tender documents and submit your bid