Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
23 Sept 2026, 11:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
P2
5 conditions
Unloading of material:- Has to be arranged by the supplier at his own risk and cost at Consignees end.
Make/Brand name of the product offered by the bidder is to be clearly mentioned. Offer without Make/Brand name or vague terms like 'AS PER TENDER' or '0' will be summarily rejected.
BID SECURING DECLARATION : I/we hereby understand and accept that if I/we withdraw or modify my/our bids during the period of validity, or if I/we are awarded the contract and on being called upon to submit the performance security/security deposit, fail to submit the performance security/security deposit before the deadline defined in the request for bid document/notice inviting tender, I/we shall be debarred from exemption of submitting bid security/ Ernest money deposit and performance security/security deposit for a period of 6(SIX) months , from the date I/we are declared disqualified from exemption of EMD/SD for all tenders for procurement of goods issue by any unit of Indian railways published during this period.
Refer to Ministry of Commerce and Industry, Government of India order number P-45021/2/2017-PP(BE-II) Part (4) Vol. II dated 19/07/24, Dated 04 June 2020 & Rly. Bd's L/No.2020/RS(G)/779/Pt.I (E 332267), dated. 20/08/2024 on Public Procurement (Preference to Make in India), Order 2017 - Revision, only CLASS-I LOCAL SUPPLIER as defined in this order shall be eligible to quote. The vendors who do not qualify to be CLASS I LOCAL SUPPLIERS should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. The Class-I local supplier must indicate percentage of local content and provide self-certification.
Bulk procurement, at-least 80 percent of the procurable quantity will be covered invariably on the past proven suppliers. The tenderer must have supplied the same item to N.F. Rly (Construction) or other zonal Railways and documentary evidence of the performance must be furnished along with their offer. (a) The tenderer with past performance of satisfactory execution of contracts for supply of the same item for a quantity of 20% or more of tender quantity against a single contract. The period to be reckoned to consider the above performance will be current financial year upto the tender opening date of the tender under consideration and preceding 3 financial years. (b) If such past performance level is lower than the offer may be considered as responsive to N.F. Railways (Construction) requirement for placement of developmental order not exceeding to 20% of the net procurable quantity. (c) The tenderer who have no past performance as above may also be considered for such developmental order, but for consideration of such offers, tenderer must submit the- details of M&P, testing facility, QAP and ISO 9000 / 14000 / 18000 certificates if available, technical manpower available with them or NSIC registration certificate for same item along with their offer.
24 conditions
Validity of offer shall be 60 days from the date of tender opening
Warranty /Guarantee as per IRS condition of contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
2 locations across Assam · 15 Numbers · 2 Set total
1. Supply, installation, calibration and training of Laboratory Electric Oven. 2. Supply of- Core cutter. Consisting of-a. 11.2 kg rammer of 150 X 150 X 960 (L X W X D) mm Millimeter (mm) made of robust material. b. Stainless steel cutter c. Steel Dolly. d. excavating tools. 3. Supply, installation, calibration and training of Three Gang bench type consolidometer (front loading) with consolidation cell for stress upto 10kg/cm2. 4. Supply, installation, calibration and training of- Aggregate Impact Machine. 5. Supply, installation, calibration and training of- Aggregate Impact Machine. 6. Measuring Cylinder - 100 ml, Material-Glass. 7. Supply of 75-micron sieve (mesh size) , 20 cm diameter to Geotechnical Laboratory/Con/NFR, Maligaon, Guwahati . IS standard. Corrosion Resistant, Durable, Easy to Clean, Stainless Steel construction. 8. Sampling Pipette.
02265444~NFRCON
02265444
Limited - Indigenous
Goods
Assam
₹0
Exempted
23 Sept 2026
17 Sept 2026
8 items · 15 Numbers · 2 Set total
Supply, installation, calibration and training of Laboratory Electric Oven. The electric oven sh ould contain- 1. Digital Indicator Cum Controller with Safety Alarm. 2. Range 50 deg C to 300deg. C. +/- 1 d eg C. 3. Air Circulating Fan, Stainless steel Inside, Size minimum 600 X 600 X 600mm. 4. Any other compon ent required for complete operation. Make: Aimil / Heico or similar better. The rate also includes- A. Supply and installation (including electrical connection) of the machine to Geotechnical Laboratory/Construction, N F Railway, Maligaon, Guwahati, Pin-781011. B. Necessary fixing of footing, bolts, grooving, concreting, bolti ng & shifting of equipment to install and fix the apparatus inside Geotechnical Laboratory/Con, NFR, Maliga on, Guwahati. C. 1st year calibration of the equipment as per NABL standard. D. First hand training of NF Ra ilway official on use of the equipment as per latest relevant code of Railway/IS standard at Maligaon, Guwa hati, Pin-781011. E. Supply of latest guidelines (RDSO/IRICEN/IS code etc.) related to the use of the equipm ent. [ Warranty Period: 12 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DYCE/CON/DESIGN-2, NFRCON | Assam | 1.00 Numbers |
| Total | 1 Numbers | |
Supply of- Core cutter. Consisting of-a. 11.2 kg rammer of 150 X 150 X 960 (L X W X D) mm Millimeter (mm) made of robust material. b. Stainless steel cutter c. Steel Dolly. d. excavating tools. Make- Aimil Ltd. or Similar better [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DYCE/CON/DESIGN-2, NFRCON | Assam | 1.00 Set |
| Total | 1 Set | |
Supply, installation, calibration and training of Three Gang bench type consolidometer (front loading) with consolidation cell for stress upto 10kg/cm2. It should consists of : 1. Loading Unit - Maximum c apacity 20 kg/cm2 consisting of a loading yoke connected to a lever arm with a counter balancing adjustm ent and having a lever ratio of 1:10, the whole assembly being mounted on a steel frame stand. 2. Consolid ation cell assembly, fixed ring type for testing 60 mm dia x 20 mm thick specimens comprising-Fixed ring f or specimens 60 mm dia x 20 mm thick with a guide ring. 3. Top porous stone for 60 mm dia specimen. Bot tom porous stone for 60 mm dia specimen. 4. Perforated Pressure pad. 5. Channeled base with water inlet. 6. Gasket 7. Flanged water jacket. 8. Set of weights (3 set) to give a pressure of 10 kg/cm2 on 60 mm speci men Comprising- a. 7 off 0.05 kg/cm2, b. 5 off 0.1 kg/cm2, c. 6 off 0.2 kg/cm2, d.6 off 0.5 kg/cm2, e.5 off 1. 0 kg/cm2. 9. Any other item or component. ThE apparatus to be supplied with following accessories- 1. Wat er reservoir with plastic tube 2. T-connection and pinch cock 3. Dial gauge - 0.002 mm sensitivity (03 Nos.) 4. Any other component required for complete operation. Make: Aimil / Heico or similar better. The rate also includes- A. Supply and installation of the machine to Geotechnical Laboratory/Construction, NF Railway, M aligaon, Guwahati, Pin-781011. B. Necessary fixing of footing, bolts, grooving, concreting, water connection , bolting & shifting of equipment to install and fix the apparatus inside Geotechnical Laboratory/Con, NFR, Maligaon, Guwahati. C. 1st year calibration of the equipment as per NABL standard. D. First hand training of NF Railway official on use of the equipment as per latest relevant code of Railway/IS standard at Maligaon, Guwahati, Pin-781011. E. Supply of latest guidelines (RDSO/IRICEN/IS code etc.) related to the use of the eq uipment. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DYCE/CON/DESIGN-2, NFRCON | Assam | 1.00 Set |
| Total | 1 Set | |
Supply, installation, calibration and training of- Aggregate Impact Machine. It will be used for determining the aggregate impact value and has to be designed in accordance with IS:2386 (Part 4), IS:937 7. Should be sturdy construction consists of a base and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall should be able to be adjusted through 380 ? 5 mm. The hammer to be provided with a locking arrangemen t. It consists of the following :- i) Fitted with an auto-matic blow counter. ii) A heavy circular base with two v ertical guides fitted with a cross bar at the top. iii) A hammer of 13.75 kg mass which can be raised and allo wed to fall freely through 380 +5 mm with locking arrangement. iv) A cylindrical cup, a metal measure and a tamping rod 10 mm dia x 230 mm long. vii) Any other component or item. Make- Aimil/Heico or similar be tter. The rate also includes- A. Supply and installation of the machine to Geotechnical Laboratory/Constructi on, NF Railway, Maligaon, Guwahati, Pin-781011. B. Necessary fixing of footing, bolts, grooving, concreting, bolting & shifting of equipment to install and fix the apparatus inside Geotechnical Laboratory/Con, NFR, M aligaon, Guwahati. C. 1st year calibration of the equipment as per NABL standard. D. First hand training of NF Railway official on use of the equipment as per latest relevant code of Railway/IS standard at Maligaon, Guwahati, Pin-781011. E. Supply of latest guidelines (RDSO/IRICEN/IS code etc.) related to the use of the eq uipment. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DYCE/CON/DESIGN-2, NFRCON | Assam | 1.00 Numbers |
| Total | 1 Numbers | |
CONICAL FLASK OF CAPACITY 250ML (2 no.), 500 ML (1 NO.). GLASS MATERIAL. MAKE- BORO SIL or similar better [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DYCE/CON/DESIGN-2, NFRCON | Assam | 3.00 Numbers |
| Total | 3 Numbers | |
Measuring Cylinder - 100 ml, Material-Glass. Make-Borosil or similar better. [ Warranty Peri od: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DYCE/CON/DESIGN-2, NFRCON | Assam | 5.00 Numbers |
| Total | 5 Numbers | |
Supply of 75-micron sieve (mesh size) , 20 cm diameter to Geotechnical Laboratory/Con/NFR, Maligaon, Guwahati . IS standard. Corrosion Resistant, Durable, Easy to Clean, Stainle ss Steel construction. Make- Aimil Ltd. or similar better. With calibration certificate for minimum 1 year. [ W arranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DYCE/CON/DESIGN-2, NFRCON | Assam | 2.00 Numbers |
| Total | 2 Numbers | |
Sampling Pipette. Make- Borosil or similar better [ Warranty Period: 30 Months after the da te of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DYCE/CON/DESIGN-2, NFRCON | Assam | 3.00 Numbers |
| Total | 3 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5474020.pdf
ATTACHMENT
5649134.pdf
ATTACHMENT
5575797.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .