Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹6,000
Closing Date
7 Jan 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Officer
Town Panchayat Office
Repairs and Maintenance of Existing ABC Care Centre at Ward No14 Old Bus Stand Premises in SithayankottaiTown Panchayat
2026_DTP_639790_1
131-2025
Open Tender
Civil Works
Works
90 days
Sithayankottai
Class I
2 documents required · 2 mandatory
₹1
Yes
₹6,000
7 Jan 2026
6 Jan 2026
7 Jan 2026
6 Jan 2026
7 Jan 2026
6 Jan 2026
Earth work excavation for foundation and depositing on bank for refilling within an initial lead of 10.00 m and an initial lift of 2.00 in hard stiff clay. Stiff black cotton soil, hard red earth, sales, murrams, gravel, stoney earth, earth mixed with small sized boulders and hard gravelly soil and except hard rock requiring blasting including shoring, strutting, bailing water wherever necessary and all other incidental charges etc., complete as directed by departmental officers as per S.S.20B
Plain Cement Concrete 1:4:8 mix Using 40mm ISS HBG metal for foundation and basement including cost and conveyance of materials to work site and all labour charges for mixing, laying, Finishing and curing etc., complete as per standard specifications(TNBP No.28).
Paving the floor with ceramic anti-skid tiles of 6mm thick of approved quality and colour laid in Cement Mortar 1:3 - 6mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.
Brick work in Cement Mortar 1:5 using best quality II Class ground mould chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" including Cost of material,labour laying ,finishing and curin etc., complete complying with standard specification .
Supplying Fabrication and fixing of weldmesh doors and windowswith outer frame and shutter frame in MS angle of size 40mm x 40mm x 4 mm and shutters covered with Weld mesh of size 75mm x 50mm & 10 gauge including cost and conveyance of all materials,one coat of red oxide primer and labour chrges for fabrication, welding, bending, cutting and fixing etc., competed as per standard specifications.
Supplying and fixing of Steel Truss Using M.S Square Tubes for Purlins,Priciple Truss,Intermediate stiffners and as directed by the Departmental officers,Cost including Materials,Wrought and Putup,Conveyance,Erection,Finishing,Fixing in position and one coat of red oxide primer etc.complete as per Standard specification .
Supplying and fixing by drilling holes and not by puching for Roofing with pre painted Galvalum sheet of 0.47mm thick of best approved quality with required size with curved shape and white ridge sheet with necessary bolts and nuts bitumen washers, including cutting the sheet to the required size found necessary during execution etc., Complete complying with standard specifications
Plastering with Cement Mortar 1:5-12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification
Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification .
Painting two coats over new iron works with Enamel paint of approved colour and quality including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete.
Wiring with 2X1.5 sqmm (22/0.3) PVC insulated sc unsheathed Cu.conductor cable of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with switch box with 5A F.T. switch(two way) in flush with wall and convered with 3mm thick hylem sheet for MS switch box with continous earth wire connection of 14 SWGTC wire and making good of the concealed portion with suitable colour for concealed light point/Fan Point ( 5 Points/Coil SD.No.25)
Wiring with 2 x 1.5 sqm(22/0.3) insuheathed Sc Cu Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and celing with PVC accessories with TW switch box and 5A F.T switch in flush with wall 150 x 100 x 113 mm TW switch Box for 5A 3 pin non inter locking CS plug with continous earth wire connection of 14 SWG T.C wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD 38)
Supply and fixing of 4’- 18 W LED Tube Light Fitting including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers.
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification
Supplying, laying and jointing of 25mm dia PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality including Cost of material,labour and laying etc., complete complying with standard specification .
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
BOQ_766023.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .