PROVN OF BOUNDARY WALL WITH MS GRILL AROUND SEWAGE TREATMENT PLANT AND PROVN OF ROAD FURNITURE AT RS COLABA AND PROVN OF WASH BASIN IN R3 BLDG AT RASHI AREA AND PROVN OF DEFICIENT PREPAID ELECTRIC METERS FOR SHOPS IN NAVY NAGAR UNDER GE NW NAVY NAGAR

Amount

Excavation in trenches n. exc 1.5m wide and n.exc 1.5m in depth and getting out in soft and loose soil.

M&L for Cement concrete type C-2 1:3:6 (40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M& L for RCC Type B-1 (1:2:4) using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete

M& L for RCC Type B-1 (1:2:4) using 20 mm graded aggregate in columns, piers, posts

M&L Formwork flat rough finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter

M&L Formwork square, rectangular or polygonal flat rough finished to sides of concrete of pillars, posts, struts, piers, columns and stanchions

S &F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F Mild steel TMT bars 6 to 8mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1: 4 complete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair face of brick work or concrete surface in CM 1:4 finished even and smooth (with out using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of white wash.

S&F for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed or bedding in cement mortar 1:6 and rubbing and polishing complete.

M&L for Cement concrete type B-1 1:2:4 ( 20 mm graded stone aggregate) as in coping, cills, steps; seismic and other similar bands, plinth courses, string courses paarapets and railings upto 60 cm in height,etc complete all as specified and directed.

S&F including fabrication framed work in MS iron such as grills, gratings gate fencing , etc with end of bars shouldered and/ or riveted or bolted with nuts and bolts framework conforming to Fe.290. Gde-E-165 complete all as specified and directed.

M&L for Preparation of New steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of antirush paint/Red oxide primer complete all as specified and directed.

Supply and Fixing tube light sign as per following specification : (a) Shape - Rectangle (b) Body Meterial - Acrylic (c) Lighting Type - LED (d) Height - 0.60 mtr (e) Length - 3.00 mtr (f) Inside Framing - Mild Steel (g) All sides and backside should have composite panel. (h) All side should be fitted with aluminium frame. (j) front side should have clear sheet on flex sheet. Board to be fitted on stainless steel frame of dia 50mm, description on board to be as described by Engineer-in-Charge complete all as specified.

Removing excavated materials/soil outside MD land to a distance exc 1.5Km but n exc 5 Km.

S&F side slanting double sided sign board of size 1.80 M x 1.20 M. Frame of board shall be made of stainless steel Gde - 202 of dia 50mm . Board shall be of 2mm thick aluminium sheet having high intensity prismatic tape in base and font duly fixed. Letters to be laser cut and fixed on sheet complete all as specified and directed. Note : For Item No 20.00 to 23.00 Stainless steel Frame of boards is included in unit rate quoted. Vertical Posts shall be measured and paid seperately.

S&F side slanting double sided sign board of size 1.20 M x 0.90 M. Frame of board shall be made of stainless steel Gde - 202 of dia 50mm . Board shall be of 2mm thick aluminium sheet having high intensity prismatic tape in base and font duly fixed. Letters to be laser cut and fixed on sheet complete all as specified and directed.

S&F side Speed limit/School sign board of size 1.20 M x 0.90 M single side. Frame of board shall be made of stainless steel Gde - 202 of dia 50mm . Board shall be of 2mm thick aluminium sheet having high intensity prismatic tape in base and font duly fixed. Letters to be laser cut and fixed on sheet complete all as specified and directed.

S&F side slanting single sided sign board of size 1.20 M x 0.90 M. Frame of board shall be made of stainless steel Gde - 202 of dia 50mm . Board shall be of 2mm thick aluminium sheet having high intensity prismatic tape in base and font duly fixed. Letters to be laser cut and fixed on sheet complete all as specified and directed.

S&F LED Solar chevron arrow sign Voltage-230 V, IP Rating-IP65 Operating Temperature-10 to 40 Degree C, Wattage - 30 W, Length-700mm, Width-600mm, Shape-Rectangle, fixed on stainless steel frame complete all as specified and directed.

S&F Stainless steel post of Gde-202 suitable for above sign board duly welded to boards from both side complete all as specified and directed.

S & F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand.

S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S & F pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F 32mm dia Corrugated Waste Pipe complete all as specified and directed.

M&L Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified.

M&L non-skid coloured Ceramic tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 20 mm thick screed bed in CM 1:6 all as specified.

M&L for rendering 12mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed.

M & L Coloured glazed ceramic tiles 300 x 200 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment all as specified and as directed.

S&F Steel water Tubing 15 mm dia medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors as specified and directed.

S&F Stop valves, 15mm dia fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm

S&F High density polyethylene pipes (HDPE) 40mm bore of pressure rating 6 kgf/ cm2 fixed complete to walls, ceilings or in floors etc including cutting holes to brick wall, dismantling of tiles/pcc and connecting the pipe upto the nahni/floor trap of bathroom and making good dismantled surface by fixing of tiles/pcc incl bends etc. as specified and directed.

Cutting holes in bricks or RCC walls exce half brick built in cement mortar including making goor after inserting and setting spouts pipes all as specified.

S&F CP grating with hole over Nahani trap and floor trap of 100mm Dia with cement

Cutting existing steel tubing for alterations or additions (Each cut measured) for 15mm bore pipe

Supply and Installation of Single Phase Smart Meter with the following specifications including taking out old one :- (a) AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10-60A anti-tamper features, (b) Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy, cumulative apparent energy and frequency, (c) Meter should have connect / disconnect functionality operable from prepaid billing software (d) Meter should have internal or external GPRS Modem or RF Modem to provide connectivity with the billing software. Make: L&T, Schneider, Secure

Supply and Installation of Three Phase Smart Meter with the following specifications including taking out old one : (a) AC Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 415 V, 50 Hz, 10-60A anti-tamper features. (b) Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy, cumulative apparent energy and frequency, (c) Meter should have connect / disconnect functionality operable from prepaid billing software (d) Meter should have internal or external GPRS Modem or RF Modem to provide connectivity with the billing software. Make: L&T, Schneider, Secure

Hosting and Configuration of the Web based Software with following modules: (a) Meter Data Management Module The meter data management module would be responsible for collecting the data from the concentrator and make the data available to the billing system. The meter data management system would capture and provide the following data: (i) 30 min instantaneous data from all the meters for seven parameters – Cumulative Energy, Cumulative Apparent Energy, Power, Current, Voltage, Power Factor and Frequency (ii) Monthly and quarterly billing survey data for cumulative energy and max demand (b) Prepaid Billing Module. The billing module would collect the data from the meter data management module, calculate the energy consumption, calculate billing determinant and make energy data / billing data available to admin and end users. Make: Innologix, Schneider, L&T

BOB ENTERPRISES

AGRAWAL ASSOCIATES