REPAIRS/RESURFACING OF ROADS FOR DOMESTIC AREA AT AF STN SURATGARH

Amount

M&L for Repair to pot holes exceeding 30mm not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in road, paths ets; cutting around edges to at least 25mm in depth, making good by applying tack coat at 5 Kg per 10 Sqm (using paving bitumen of grade VG-10) putting in premixed bituminous macadam using paving bitumen of grade VG-30) sealed 9.8 kg per/10sqm blinded with 0.09 Cum of stone chippings, 6.3mm size and again well rammed with power road roller of 8 to 12 ton capacity and consolidated (including supply of premixed macadam, binder and chipping),complete all as specified and as directed by the Engineer in Charge.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning with mechanical compressor the cleaned surface with gunny bags to remove all loose dirt and Applying evenly a priming/ tack coat @ 5 Kg. Per 10 Sqm using bitumen emulsion (RS-1) conforming to IS-8887 with mechnical sprayer ,operated by cold pressure mechnism ,complete all as specfied and as directed.

M&L for premix bitunimuous macadam from hot mix plant with 4 % binder content by weight of total mix using paving bitumen of grade VG-30 laid with mechnical paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required gradient and camber (consolidated thickness 75mm or less) ,omplete all as specfied and as directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning with mechanical compressor the cleaned surface with gunny bags to remove all loose dirt and Applying evenly a priming/ tack coat @ 5 Kg. Per 10 Sqm using bitumen emulsion (RS-1) conforming to IS-8887 with mechnical sprayer ,operated by cold pressure mechnism including laying of bituminous premixed semi dense asphalted concrete 30 mm consolidated thickness using paving bitumen of grade VG-30 @ 5.5% binder content by weight of total mix, spread by means of self propelled mechanical spread/pavers rolled and compacted to required camber and gradient by using mechanical power road roller 8 to 12 ton capacity complete all as specified and as directed by Engr in charge

M & L for preparing bituminous surfaces of road and marking good for road marking with reflective thermoplastic white road marking paint confirming to BS 3262-1989 laid through road marking machiene in layer of CRYSTALX (using 5 kg per sqm by incorpting 8 % white glass beads for reflectivity) and 2.0mm thick centre lines, stop lines, dashes, arrows etc as per IRC pattern laid at temperature 60degree centigrade including necessary traffic diversion arrangement, complete all as specified and directed.

Dismantling of aluminium road stud/ delinator of any typeand any size from bituminius road before road carpeting work, complete all as specfied and as directed.

S&F Aluminium Stud Alloy of Dimension 125x125 x 25 mm and PC Construction Solar powered by Mono Crystal Solar Panel having type of Battery : One high capacity Ni-Cd Rechargeable Battery, View Distance : App 1000 Metre, LED – O 10mm, 3 Pieces Each Side and Total 6 Pieces are used for high brightness of different Colours, Backup 12 Hours of Continuous Lighting at Night, Red Colour super quality Solar Stud and fixing/ sealed with Epoxy (as required) including taking down unserviceable one, complete all as specified and as directed.

Supply and fixing in repair metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

S&F speed bump 350mmx250mmx50mm height made of sturdy plastic, pre-coloured (Black/yellow) and UV stabilisers studded with reflectors on either side and installing by cleaning the surface, grouting the holes and applying epoxy adhesive on the road surface and bumps, placing the bumps on the fixing area and hammer the nails provided with the bump, including removal of existing damaged bumps of any description, complete all as specified and directed.

S & F in repair convex mirror 1000mm dia having clear and definitive mirror mirror image with 130 degree of viewing angle, provided with and including 50x50x4mm mild steel pipe square tube post of length 1.75m and embedded in post holes (size 450x450x600mm) in PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) with necessary bolts, nuts, base plate etc. and welding as required for fixing including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Supply and fixing informatory Sign board of size 1200 mm x 900 mm made of aluminium sheet 2 mm thick with stainless steel rectangular frame using 25 x 15 mm rectangular pipe with 35 mm dia stainless pipe in outer border all around retro reflective high intensity 400 micron thick blue/yellow colour sheet pasted with heating process on both bsides of the board including 75 mm to 100 mm high black colour letters cut to shape with special plotter and in proper manner incidating Shed No as directed by Engr in charge .02 Nos 75 mm dia stainless steel pipes of 304 grade glossy finish with MS plate 3 mm thick welded at bottom of pipes shall be provided the board shgall be fixed at height of 3.0 mm (top level of board) above GL and shall be embedded in ground using PCC 1:2:4 type B-1 of min size 300mmx300mmx600mm including necessary from work.excavartion and earthbwrk incl taking down,complete all as specified and directed.

M/S SHRI RAM CONSTRUCTIONS (BID ID -3389441)

Ankit Jindal And Company (BID ID -3380637)

Rudrashiv Enterprises (BID ID -3380021)