WELCOME MAINT PERIODICAL SERVICES TO CERTAIN BLDGS OF MD/OTM/TECH AREA OF CG AND REPAIRS TO LEAKAGE, SEEPAGE, WATER PROOFING TREATMENT, JOINERY, ROOF SHEETING OF CERTAIN BLDGS UNDER AGE B/R-II AT GE HADDO, PORT BLAIR

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description, area exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in the same opening after easing and adjusting etc., complete all as specified and as directed.

S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as per specification & drawing, fixed in opening in repairs complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with particle board core, 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm plain colour PVC sheet on back face as per specification & drawing fixed to door frame complete all as specified and as directed.

M&L for mild steel hold fasts, bands, straps, supports or stays for rainwater, brackets/clamps for eaves and valley gutter and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in bed blocks for hold fasts, including weathering, slightly rounded or chamfered angles and throating including necessary form work, exposed surfaces of concrete finished even and smooth without using extra cement complete all as specified and as directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fixed to chowkats complete all as specified and as directed.

S&F flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and as directed.

M&L for second class hard wood (Hollock) plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm including taking down old unserviceable fillets complete all as specified and as directed.

M&L for anodised aluminium partition, window and door/ventilator with frame and shutters and grill fully or partly glazed, sliding/openable/fixed fully glazed and panels fixed with panels inserts 12 mm thick pre-laminated particle board/sheet glass including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodized aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts etc. The size of aluminium section shall be all as specified in relevant IS Code and SSR Part-I, fixed in repairs complete all as specified and as directed. NOTES: (i) Supply only floor spring, glass, Imax hinges, SS friction hinges, particle board, aluminium fly proof mesh will be measured and paid separately under relevant items of this BOQ. (ii) Weight of aluminium section only shall be accounted for the purpose of payment. However unit rate quoted shall be deemed to include for cost of rubber beading, neoprene packing, fittings such as handles, butt hinges, tower bolts, rollers for sliding windows, locking arrangement and fixing only of panel inserts of glass/ particle board/aluminium fly proof mesh etc. (iii) Weight of aluminium handle, butt hinges, tower bolts shall not be accounted for payment purpose.

Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.50mm graded stone aggregate) as in sub base of floors/levelling course/pavings etc., complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Roughening surfaces of old concrete floor surface by hammer, picking, sweeping clean and washing down with water to remove dust etc., complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in filling in sunken floors complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in roof padding/sunken floors and similar work duly mixed with water proofing compound @ 3% by weight of cement complete all as specified and as directed. NOTE: Water proofing compound will be measured and paid separately under relevant item of this schedule.

M&L for screed bed 10mm thick in CM (1:4) on RCC roof slab, surfaces finished even and smooth without using extra cement duly mixed with water proofing compound @ 3% by weight of cement complete all as specified and as directed. NOTE: Water proofing compound will be measured and paid separately under relevant item of this schedule.

M&L for preparing plastered surfaces and applying a coat of cold applied bituminous primer over cleaned roof/ sunken surface @ 0.30 Kg/sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg/Sqm over primer followed by 3 mm thick APP modified 5-layered polymeric water proofing membrane weighing not less than 3.0 Kg/sqm reinforced with polyester non-woven fabric weighing not less than 150 grams/sqm laid as per the manufacturer instructions with side over lap of 100mm & end over lap of 150mm & tucked into the chases on roof, sunken slabs, edges and vertical surfaces and finally finishing the APP membrane surface with bituminous aluminium paint @ 0.10 Kg/sqm complete all as specified and directed. MAKE: STP Limited/ PIDILITE INDUSTRIES LIMITED (Dr. FIXIT TORCHSHIELD P3160)/ IWL INDIA LTD

M&L for applying a coat of bituminous aluminium paint @ 0.15 Kg/sqm over bituminous surface complete all as specified and directed. MAKE: STP Limited/ PIDILITE INDUSTRIES LIMITED/ IWL INDIA LTD

M&L for 25mm dia or bore galvanised steel tubing, medium grade, with all fittings and fixed to walls and ceilings or laid in floors as spouts in sunken floor complete all as specified and as directed.

Demolition of PCC block masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry exceeding 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry not exceeding 10cm in width and setting in cement mortar (1:4) complete all as specified and directed.

Dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and grid complete all as specified and as directed.

M&L for anodised aluminium snap grid frame work for false ceiling with size of grid 605mm x 605mm all as specified in SSR Part-I 2009, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat iron 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including cutting, drilling, jointing etc., 6mm thick non-asbestos fibre cement building design boards (E-boards) fixed or laid/ inserted to aluminium frame work with screws and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for 18/19mm thick HDF boarding (fire & water proof) as in cup boards, cabinets, shelves and the like fixed independently or to existing frame work and finally applying two coats of synthetic enamel spray painting (glossy finish) over a coat of primer including removal of old damaged boarding complete all as specified and as directed.

S&F automatic hinges, stainless steel suitable for kitchen cabinets complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, for work on vertical surfaces such as skirting, dados and risers to steps etc., including 10mm thick backing coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile not exceeding 0.11 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar

M&L for machine cut polished cudappah stone slab 40mm thick as in verticals and horizontals supports for shelves, cooking platform and the like including necessary jointing and pointing with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and making good disturbed surfaces to match with surroundings complete all as specified and as directed.

M&L for 16 to 18mm thick granite work (of any type and shade as approved) table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms, wash basin counters and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick cement mortar (1:4) bedding and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and mirror polishing, rounding (chamfering) the edges complete all as specified and directed.

Drilling holes with drilling machine for bolts, gas pipes, etc., not exceeding 25mm dia, each hole of 10cm depth complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removal of debris to outside MD land complete all as specified and as directed.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in two coats 5mm thick in CM (1:4) mixed with integral water proofing compound @ 3% by weight of cement over 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished fair and even complete all as specified and as directed. NOTE: Water proofing compound will be measured and paid separately under relevant item of this schedule.

M&L for rendering 5mm thick in CM (1:3) on fair faces of concrete as in ceilings, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound.

Taking down of damaged, loosened cement concrete/cement mortar in walls and similar structural members up to depth of 20 mm, cleaning the dismantled portion with wire brush etc remove dust , dirt and other foregin particals etc., and washing with water with pressure and applying bonding agent on old concrete surfaces all as specified and as per manufacturers instructions, Over prepared surfaces provide 20mm thick high build polymer modified cement sand mortar (1:2½) mixed with 5 litres (minimum) Nitobond SBR per 50 kilograms of cement of M/s FOSROC Chemical (India ) Pvt Ltd or equivalent in Dr. Fixit or Harjas Coatings & Polymers including necessary scaffolding up to 15 m and including match the existing shade of suface complete all as specified and directed

M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint of first quality complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of distemper oil emulsion after filling the cracks with filler complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement based paint complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat of distemper oil emulsion after filling the cracks with filler complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat of white wash after filling the cracks with filler complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceilings of any description and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment by scraping, washing, cleaning etc., and applying two coats of distemper oil emulsion, acrylic type over a coat of alkali resistant primer after filling the cracks and levelling the undulations if any with cement putty complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of weather proof antifungal (exterior grade) acrylic emulsion after filling the cracks with filler complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of external walls of any description and applying two coats of weather proof antifungal (exterior grade) acrylic emulsion over a coat of primer from the same manufacturer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of distemper oil emulsion over a coat of primer including 3mm thick wall care putty for smooth surface by grinding etc., complete all as specified and as directed.

S&F aluminium grill of approved pattern, anodised powder coated, cut to required size and shape, fixed in postion with aluminium beading & frame made of aluminium F-section fixed to aluminium windows/ ventilators complete all as specified and as directed.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 75mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F sliding door bolt, 300mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and as directed.

SUPPLY ONLY 4.0 mm thick sheet glass, ordinary quality and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

SUPPLY ONLY 4.0 mm thick figured glass, pin head type and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed.

S&F 300mm size, brass, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

SUPPLY ONLY aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

M&L for PVC connections 15mm size with PTMT nuts of length 600mm, fixed in repairs complete all as specified and as directed.

S&F corner glass shelf with brackets, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BEA-44 or equivalent in JAQUAR/PARRYWARE

Dismantling PVC (SWR)/ cast iron pipes of 110mm dia in any position alongwith all fittings and fixtures by removing at joints complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches/fixed to walls using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F PVC (SWR) bends any radius, diameter of outlet 110mm complete all as specified and as directed.

S&F PVC (SWR) bends with oval access door, any radius, diameter of outlet 110mm complete all as specified and as directed.

S&F PVC (SWR) branch piece with oval access door, single (single Y) equal or unequal, diameter of outlet 110mm complete all as specified and as directed.

S&F PVC (SWR) vent cowl of diameter 110mm complete all as specified and as directed.

Dismantling PVC (SWR)/ cast iron pipes of 75mm dia in any position alongwith all fittings and fixtures by removing at joints complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches/fixed to walls using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F PVC (SWR) bends any radius, diameter of outlet 75mm complete all as specified and as directed.

S&F PVC (SWR) bends with oval access door, any radius, diameter of outlet 75mm complete all as specified and as directed.

S&F PVC (SWR) branch piece with oval access door, single (single Y) equal or unequal, diameter of outlet 75mm complete all as specified and as directed.

S&F PVC (SWR) vent cowl of diameter 75mm complete all as specified and as directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement, diameter of outlet 75mm complete all as specified and as directed.

S&F wall mixer 3-in-1 system with provision of both hand shower and over head shower composite with 115mm long bend pipe connecting legs & wall flanges with and including hand shower with 8mm dia shower tube, 450mm long shower arm and over head shower, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-80H for wall mixer PRAYAG Cat part No. BHS-87 for hand shower PRAYAG Cat part No. BOS-90 for shower arm & over head shower

S&F angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-10H or equivalent in JAQUAR/PARRYWARE

S&F pillar tap, brass, 15mm dia, chromium plated, fancy type with capstan heads, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-50H or equivalent in JAQUAR/PARRYWARE

S&F bib tap, brass, 15mm dia, chromium plated, fancy type, long body with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-08H or equivalent in JAQUAR/PARRYWARE

S&F two way bib cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-12H or equivalent in JAQUAR/PARRYWARE

S&F toilet paper holder, brass, chromium plated, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BA-38 or equivalent in JAQUAR/PARRYWARE

S&F towel ring (square), brass, chromium plated with round flange, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BA-11 or equivalent in JAQUAR/PARRYWARE

S&F tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BA-70 or equivalent in JAQUAR/PARRYWARE

S&F soap dish holder, brass, chromium plated, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BA-45 or equivalent in JAQUAR/PARRYWARE

S&F health faucet, brass, chromium plated with 8mm dia, 1.0 m long flexible tube with wall hook, screwed for iron pipe or for brass ferrule 15mm dia or bore, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BEA-41 or equivalent in JAQUAR/PARRYWARE

M&L for Cutting chases in PCC block masonry walls, for concealed water tubing etc., and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 25mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 20mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² including fittings, fixed complete to walls, ceilings or in floors etc., and to any type of pipe complete all as specified and as directed.

S&F 25mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² including fittings, fixed complete to walls, ceilings or in floors etc., and to any type of pipe complete all as specified and as directed.

S&F 50mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceilings or in floors etc., fixed in repairs complete all as specified and as directed.

M&L for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests, P or S trap including provision of lime concrete bedding and connecting to existing flushing cistern and making good disturbed surfaces to match with suroundings, fixed in repairs complete all as specified and as directed.

M&L for vitreous China, wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and connecting to drain pipe and flush pipe, fixed in repairs complete all as specified and as directed.

M&L for vitreous China wash hand basin, white, flat back, size 630mm x 450mm, rectangular shape, fixed in repairs complete all as specified and as directed.

M&L for PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets and connecting to WC, fixed in repairs complete all as specified and as directed.

S&F kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repairs complete all as specified and as directed.

S&F plate rack of stainless steel of size 31"x36"x10" with steel shelves, partitions & hanging arrangements for utensils, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. P-348 or equivalent in JAQUAR/PARRYWARE

Dismantling water tanks of capacity exceeding 500 litres and not exceeding 1000 litres and removing to store complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top), 1000 litres capacity, hoisted and fixed in position all as specified in SSR Part I, 2009 including 25mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball (minimum weight 455gms) screwed for iron pipe, provision of 40mm/25mm spouts for connecting inlet, outlet, over flow and washout pipes including taking down old unserviceable tank with fixtures complete all as specified and as directed.

S&F 25mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron or CPVC pipe, fixed in repairs complete all as specified and as directed.

S&F 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron or CPVC pipe, fixed in repairs complete all as specified and as directed.

S&F PVC cabinet of size 610mm x 410mm x 100 mm having mirror of 4mm thick and size 600mm x 400mm with built-in rack and CP towel rail with PVC plugs etc., fixed in repairs complete all as specified and as directed. MAKE: SUPREME/PRAYAG

S&F curtain rails, 20 to 25mm dia, anodised aluminium, with coloured fancy type designed fixing brackets, fixed in repairs complete all as specified and as directed.

S&F aluminium wardrobe hooks (single) 50mm to 60mm, fixed in repairs complete all as specified and as directed.

RELIANCE SALES AGENCY

M/s Saina Enterprises

Sree Tirumala Enterprises

M/s K Moorthi

M/s Ramesh Lal

kakolil trade agencies

M/S VISHAL CONSTRUCTION