Repair and Maintenance work for 4 Nos Tank No -3,4, 7,8 Nos of Existing curing tanks by re plastering the inner surface of walls, replacing the Existing PCC Flooring into RCC Flooring and increasing the height of the existing curing tank allround SER

Repair and Maintenance work for 4 Nos (Tank No -3 & 4, 7 & 8) Nos of Existing curing tanks by re plastering the inner surface of walls, replacing the Existing PCC Flooring into RCC Flooring and increasing the height of the existing curing tank allround walls in Samayanallur PSC yard premises located at Samayanallur TNEB Campus

Dismantling and removal of existing brick masonry in Cement mortar walls cleaning the surface without any loose materials,clearing the debris away from the site including cost of materials, labour, lead, lift, etc, complete.

Dismantling of plain Cement concrete for curing tank flooring, cleaning the surface without any loose materials,clearing the debris away from the site including cost of materials, labour, lead, lift, etc., complete.

Clean removal of cement plaster from brick walls clearing the debris away from the site including cost of materials, labour, lead, lift, etc., complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for Curing tank flooring concrete for 100mm thickness with out formwork including cost of all (machine crushed) materials, lead, lift, etc., complete. but excluding cost of steel reinforcement (As instructed by the Engineer at site)

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Brick work in Cement Mortar 1:3 using best quality of II Class Ground Moulded Chamber Burnt Brick of size 9" x 4 3/8" x 2 3/4" for curing tank wall including cost of all material, lead, lift, labour, etc., complete.

Plastering with CM 1:5 mix using 12mm thick for inner walls with the best approved quality water proofing component confirming to the IS spec. by the departmental officer at 2% by the weight of cement used, finishing, curing etc., complete.

Remove the loose materials, Providing the V groove all along the edges of tanks and structural cracks in plaster filling with DR.Fixit Pidiseal 41G, Cleaning the surface and applying two coats heavy duty 2 part cementitious Acrylic water Proof coating with Dr.Fixit Pidifin2K.

White washing two coats with White cement approved quality over a primary coat with thorough scrapping of old plastered surface from walls including cost of all materials, lead, lift, etc., complete.

GST for bidders within Tamilnadu

GST for bidders outside Tamilnadu