Construction of PPGL roofing shed with platform, ramp facilities, water supply arrangements, sewage arrangements and allied works for the newly constructed South Gobi Sub division office at sub store premises, Gobi.

Providing Plain Cement Concrete in 1:3:6, using OPC 53 grade cement (DALMIA/ ULTRATECH/RAMCO) ,M sand , 40mm HBG metal- (Approved quarry) including cost of cement, all materials, labour charges, curing, all leads, lifts, as per standard specification etc., complete as directed by the Engineer in charge.

Brick work in CM 1:5 using IInd class chamber burnt bricks (230x110x75mm),OPC 53 grade cement (DALMIA/ULTRATECH/RAMCO),M sand for super structure and other structures including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete as directed by the Engineer in charge.

Providing Plain cement concrete (PCC) in 1:2:4 mix using OPC 53 grade cement (DALMIA/ULTRATECH/ RAMCO) ,M sand , 6 to 10mm (machine crushed) metal (Approved quarry) for granolithic concrete over roof top including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete.

Plastering in CM 1:5, 12mm thick using OPC 53 grade cement (DALMIA/ ULTRATECH/RAMCO),P sand approved quarry for all wall surfaces,etc., including cost of all materials, scaffolding charges, Labour charges, curing, lead, lift, T&P etc., complete as directed by the Engineer in charge.

Dadooding walls with approved quality of glazed tiles, size and design (Kajaria/Johnson or its equivalent), laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joint sand pointing flush with the tile surface , including cost of all materials, labour, lead, lift, etc. complete as directed by the Engineer in charge.

Providing floor finish with stain free nano polished Vitrified tiles of approved size, make(Kajaria/Johnson or its equivalent), colour and pattern over 10mm thick Cement mortar 1:3 for bedding and pointing same coloured cement in all floors , including cutting chase in walls wherever required, cost of all materials labour charges lead, lift, curing T&P etc., complete as directed by the Engineer in charge.

Flooring with available sizes of approved quality,design & colour (Johnson or equivalent make) of non-slippery anti skid tiles laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete as directed by the Engineer in charge.

Fabricating Supplying and fixing in position of Aluminium anodised powder coated finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the Engineer incharge. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.

Supplying and fixing PVC panelled door shutters hollow type with PVC frames including cost of necessary aluminium hinges and other furniture fittings, leads, lifts, labour charges etc, complete as per specification.

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.700 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/ mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.