PROVISION OF TRADE PATTERN FURNITURE FOR CGOM AT FORT KOCHI

Amount

Bath Stool PVC/Bath Room Stool (Make- Nilkamal/ Brite/ Cello/ Supreme), Minimum size: 30 cm x 24 cm x 25 cm. The surface shall be non-slip and shall ensure stability on wet bathroom floors

Bed Hard Ply Top/particle board top (Adrina Single Bed Walnut) Make- Godrej, Size (LxWxH) 2060mm x 1131mm x 945 mm Bed Structure : Metal frames made of M.S. Channels in 1.0 mm Thickness. Horizontal plinths and bottom plinth shall be made of 25 mm Thick Prelaminated Particle Board. Head board : 18 mm thick Prelaminated Particle board with H.D.F. foil wrapped decorative trims. Tail board :18 mm thick Prelaminated Particle board with H.D.F. foil wrapped decorative trims. Side rail:18 mm thick Prelaminated Particle board with H.D.F. foil wrapped decorative trims. Mattress panels:18 mm thick Prelaminated Particle Board with all the exposed edges banded with 0.8 mm thick PVC edge banding. Construction :Knock Down construction Finish: Walnut shade. Metal frames shall be powder coated in shade Mat Black to the thickness of 50 microns(+10).

Chair Writing/Chair Visitor (Godrej Bravo Visitor Chair) Make-Godrej, (WxDxH) 61.4cm x 64.5cm x 89.5 cm Seat/Back Assembly: The seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat shall have extra thick foam on front edge to give comfort to popliteal area. Mid back size 47.5 cm. (W) x 58.0 cm. (H). Seat size: 47.0 cm. (W) x 48.0 cm. (D) High Resilience (HR) Polyurethane Foam: The HR polyurethane foam shall be moulded with density = 45 ± 2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. Arm rests :The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. Tubular frame : The powder coated ( DFT 40-60 microns ) tubular frame shall be cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. Seat height (SH): 46.5 CM.

Chair Revolving (Marvel Mid Back Chair) Make- Godrej, Size (HxWxD) 96.6 to 1140.0cm x 76.1cm x 76.1cm Seat/back assembly: The Cushioned seat shall be made of Injection molded Plastic outer & inner. Plastic Inner shall be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45 ± 2 kg/m3, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9 ± 0.03cm x 0.16 ± 0.0128cm. It upholstered with Leatherette. Seat size : 47.0 cm. (W) x 48.0 cm. (D), Mid back size: 47.7 cm. (W) x 60.1 cm. (D) Arm rests: The armrest top shall be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81 ± 0.03 cm x 0.2 ± 0.01 cm thick M.S. E.R.W tube having chrome plated finish. The armrest height adjustable up to 6.5 ± 0.5cm in 5 steps. Active Bio-Synchro Mechanism: The adjustable tilting mechanism should be designed with the following features: (i) 360' revolving type, (ii) Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort., (iii) Tilt tension adjustment can be operated in seating position., (iv) 5-position Tilt limiter giving option of variable tilt angle to the chair., (v) Seat/back tilting ratio of 1: 2 (vi) The mechanism housing should be made up of HPDC Aluminium black powder coated. Seat depth adjustment: Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be of 6.0 ± 0.5 cm. Adjustable back support: Back Frame should be connected to the Up/Down mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42 ± 0.5 cm for the comfortable back support to suit individual need. Pneumatic ht. Adjustment: The pneumatic ht adjustment has an adjustment stroke of 10.0 ± 0.3 cm. Pedestal assembly: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors) Twin wheel castors: The twin wheel castors should be injection moulded in black PP having 6.0 ± 0.1cm wheel Diameter.

Peg Table (Splenda Pro Corner Table Cappuccino), Make- Godrej Size (LxWxH)- 55 cm x 44.95 cm x 45.72 cm Table top gloss- finished with natural wood finish Understructure - Treated rubber wood

Receptacle /Dust Bin 20 liter (Dust bin 12" x 16") Make- Godrej, 20 Liter Capacity, Pedestal type bin Plain. Thickness - 0.40MM Material : SS 200 Series Material Thickness - 0.4mm sheet (Tolerance +/- 0.2 mm)

Sofa Single Seater (Hexa 1 Seater Sofa), Make- Godrej, Size (HxWxL)- 91cm x 88 cm x 83 cm Seat Height - 45CM. Quilted cushions with wooden accents under the armrests. Cushions - Recron-filled Upholstery - Easy-to-clean and water-proof.

Table Bed Side (Zurina Bedside Table Bed Wengo) Make- Godrej, Size (DxWxH) 461mm x 460mm x 510 mm Material : Body panels made of 18 mm thick Prelaminated Particle Board. All the exposed edges shall be banded with 0.8 mm thick PVC edge banding. Drawer front & Door - 18 mm thick Prelaminated Particle board with imported H.D.F foil wrapped decorative trim. Hardware : make Hettich. Construction : Knock Down Finish : Maple shade

Table Centre (Gayle Coffee Table Red) Make-Godrej, Size (WxHxD) 110cm x 39.9cm x 59.9cm Primary Material - Tempered Glass Finish Color - Red Net Weight (kg) - 23.3 Maximum Load Capacity (kg) - 40

Table Centre Two Tier with Glass Top (Alice Pro Coffee Table Walnut), Make-Godrej, Size (WxDxH)- 100 x 65 x 45cm Table top materials: 10 mm thick tempered Glass Material : Wood

Table Writing (Enzo Table 5026), Make-Godrej, Size (WxDxH) 1500mm x 750mm x 750mm Table top - pre-laminated particle board 18 mm thick and 15 mm thick understructure covered with PVC lipping. Locking arrangement - for top drawers only. It shall have one drawer (RHS) & HDU attachment on one side & 3 drawer unit on the other side (LHS of user)

Table Dressing Gents (Aero Dresser with Stool Valigny Oak), Make-Godrej, Size (WxDxH)- 900 x 600 x 1970 mm Pouf Dimensions-350 x 475 x 415 mm (W X D X H) . Carcass Body Panels-18 mm thick prelaminated particle board with 2 mm thick PVC edge banding. Drawer Bottom/Drawer Front-9 mm thick prelaminated particle board/18 mm thick PU Painted MDF Panels. Mirror Panel-18 mm thick prelaminated particle board with 4 mm thick mirror fixed with 3M tape. Internal (behind the mirror)- Shelves are provided with Shelf retainer . Pouf-12 mm ply structure with bottom skirting in prelaminated particle board and edge banding. 28 density 25mm thick foam around the ply structure. 28Density 75mm thick foam for seat. Complete pouf upholstered with Leatherite. FINISH-PU parts: Cream colour (NCS S 0505-Y40R).All prelaminated particle board Boards in Valigny Oak having matching 2mm thick PVC edge banding.

Almirah Med Steel (Minor Plain), Make-Godrej, Size (WxDxH)- 765mm x 440mm x 1270 mm with welded construction. Shelf thickness - 0.7mm, Back thickness - 0.8mm and all other components shall be 0.9mm thick. All components are made of CRCA ‘D’grade high yield strength as per IS:513. Locking mechanism - Three way with Shooting Bolts. Shelf mounting - 3 Nos height wise adjustable Load capacity - 40 Kg, Uniformly Distributed. Leveller - M10 Screw type with Hex plastic base. Finishing - Epoxy powder coated to the thickness of 50 microns (+/- 10).

Almirah Large Steel (Storwel Plain), Make- Godrej, Size (WxDxH)- 916mm x 486mm x 1981mm with welded construction. Shelf thickness - 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. Locking mechanism - Mazak handle and Three way locking mechanism with Shooting Bolts. Shelf mounting - Height wise adjustable shelf mounting (min 4 Nos) Load Capacity - 40 Kg Uniformly Distributed. Leveller - M10 Screw type with Hex plastic base. Finishing - Epoxy powder coated to the thickness of 50 microns (+/- 10).

Bar Stool 3' high, Stainless steel with cushioned seat, (Counter Chair (Bar/Pub) Make- V J Interior or eqivalent

4 Door Book Case having 4 Glass Doors and Metal Top. Make- Godrej, Size (WxDxH)- 914mm x 320mm x 1742 mm The Book Case shall be made from prime quality CRCA steel with anti-rusting treatment. It shall have a Rigid Knock Down Construction. The Top Panel, Back Panel and Side Panel shall be made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision which shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10).

Chair Dining (Pause Mahogany Dining Chair), Make- Godrej, Size (LxWxH)- 42 cm x 45 cm x 96 cm Seating Height : 46.8cm Material: Rubber wood + Fabric, Wood Colour: Mahogany

Chair Verandah (Unwind Café Chair-MS Powder Coated Understructure), Make-Godrej, Size (HxWxD)- 84.5cm x 52.5 x 55.8cm The Seat and Back should be made up of injection moulded indoor grade Polypropylene compound Seat size: 52.5 cm. (W) x 53.2 cm. (D) Back size: 51.6 cm. (W) x 40.5 cm. (H) Seat Height - 45.0 cm The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MS ERW tube. The shoes should be made of indoor grade Polypropylene compound and snap fitted with tubular frame.

Magazine Rack (All Steel Periodical Display Rack) Make-Godrej, Size (WxDxH) 900mm x 450mm x 1830mm) Construction shall be Rigid Knockdown type. Panels shall be made from CRCA 0.6 mm thick and front frame shall be made from CRCA 0.8 mm thick. CRCA D grade as per IS 513. There shall be 5 level racks, Display tray shall be suitable for fullscape size magazines, periodicals, aesthetically appealing metal tray at an angle for easy viewing. Receding facility to access the storage behind. Sliding- on plastic rollers Behind storage shelving- each of 5 level has a behind storage shelf. Uniformly Distributed Load capacity per each shelf is 40 kg. Leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns.

Wall mounted premium Stainless Steel Kitchen Rack of Minimum size (WxDxH)- 48 x 36 x 8 inch, weighing not less than 6.8 kg to 7kg. Tier design with separate section for plates, bowls, container and cups Make: Charmy/ Nirali/ Prayag Polymers/ Jaquar (Bathing)

Recepticle Large PVC (Recepticle large PVC 120 liter) (Make- Nilkamal/ Brite/ Cello/ Supreme), Capacity 120 Liter HDPE It shall have following features: (i) 100% HDPE Virgin And Heavy Duty Plastic with solid rubberized wheels for smooth operation. (ii)Specially designed bottom for minimizing the breakage. (iii) Strong Lid With Smooth Curved Upper Surface for Perfect fit to ensure preventing unwanted smells to escape and Rain Water to seep through. (iv)Body made from shock absorbent high-destiny UV stabilized polyethylene to avoid degradation due to ultra violet radiation. (v) good resistance to common chemicals & acids and withstand in low and high temperature. (vi) Wheel Waste Bin shall have suitable support for easy and convenient transportation of waste from workstation to the main garbage area. (vii) Durable castor wheel support for easy movement. (viii) Colour- Blue (ix) Opening Mechanism Manual- Lift (x) Material- Plastic

Side Board Large (Expo Large Display), Make- Godrej, (LxDxH) 140 cm x 40cm x 78.6 cm It shall be durable and made from quality materials with excellent fit and finish, in a classic design with contemporary aesthetics. All carcass panels shall be made of PLT, fitted with Hettich overlay hinges, metal handles, and tempered glass shutters.

Sofa Set 5 Seater (3+1+1) (Hexa Sofa 1 Seater & 3 Seater), Make-Godrej, Size of 01 Seater HxWxL=91 cm x 88 cm x 83 cm and 03 Seater HxWxL= 91 cm x 88 cm x 181 cm Seat Height: 45CM It shall have quilted cushions with wooden accents under the armrests. Recron-filled cushions to provide a comfortable sink in feel with lumbar support. Curved, slender armrests with waterfall edges to support leaning. Easy-to-clean, water-proof upholstery and withstand daily use.

Stool Dressing (Hexa Ottoman Dressing Stool), Make-Godrej, Size (LxWxH)- 50 cm x 45 cm x 38 cm It shall have Solid wood frame with fab leather upholstery and suitable for low maintenance and multi usage.

Table Centre (Pisa Centre Table), Make Godrej, Size (WxDxH) 112.0 cm x 60.0 cm x 34.9 cm Center table glass: 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. Center table understructure: welded Assembly made in SS202 grade

Table Dining (Feast Dining Table 8 Str Wood Brown) Make-Godrej, Size (LxWxH) 1800 x 1065 x 764 mm The solid rubber wood shall assure a sturdy frame and is made to last long. It shall have natural wood colour. All items should have undergone various tests and abide by Godrej quality standards. It shall not require heavy maintenance. Table specifications: (i) Length – 1800 mm x Width – 1065 mm x Height – 764 mm (ii) Material- Tabletop – 19 mm thick MDF board, E1 grade + rubber wood veneer (iii) Table legs – Solid rubber wood (iv) Construction- Knock Down Construction (v) Packets- 1 Table in 1 Packet (vi) Tabletop Thickness – 20 mm

Table Dressing Ladies (Aero Dresser with Stool Valigny Oak), Make-Godrej, Size (WxDxH) 900 x 600 x 1970 mm Pouf Dimensions-350 x 475 x 415 mm (W X D X H) without leveller. Carcass Body Panels-18 mm thick PLT board with 2 mm thick PVC edge banding. Drawer Bottom/Drawer Front-9 mm thick PLT/18 mm thick PU Painted MDF Panels. Mirror Panel-18 mm thick PLT with 4 mm thick mirror fixed with 3M tape. Internal (behind the mirror)- Shelves provided with Shelf retainer in addition to two bangle holders, a socket and switch. Pouf-12 mm ply structure with bottom skirting in PLT and edge banding. 28 density 25mm thick foam around the ply structure. 28 Density 75mm thick foam for seat. Complete pouf upholstered with Leatherite. FINISH-PU parts: Cream colour (NCS S 0505-Y40R). All PLT Boards in Valigny Oak having matching 2mm thick PVC edge banding.

Table Office Officer (Aristo Table 1800 LH RU 1200 PDL), Make-Godrej, Size (1800 x 1950 x 750 mm) It shall have following specifications. (i) Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box which shall be provided on work surface for wire management (ii) Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS14587:1998 with 0.4mm PVC membrane pressed on to top. (iii) Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. (iv) Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. (v) Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. (vi) Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top (vii) Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. (viii) Drawer extension is 325 MM. (ix) Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. (x) Pedestals are provided with lock for security. (xi) This product should be certified by GREENGUARD, Indoor Advantage GOLD & GREEN PRO.

Teapoy (Meraki Corner Table Brown), Make- Godrej, Size (WxDxH) 60 cm x 60 cm x 49.8 cm) Materials: All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Drawer bottom is made of 9 mm thick prelaminated particle board. Drawer front is made of 18 mm thick PU painted MDF. Legs: Rubber wood Hardware: Hettich Construction: Knock down Finish: All 18 mm prelaminated particle board panels are Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade

Table Card with 4 Chair per Table (Estana Dining Set 4 Str Wood Ind), Make-Godrej, Size (LxWxH) 110 cm x 75 cm x 73.8 cm It shall have very minimal, small, and compact design that suits both small corners and large Indian spaces equally having Mahogany finish.

4 Door Filing Cabinet (4 Drawer Filling Cabinets), Make-Godrej, Size (HxWxD) 710 x 470 x 620 mm for 2 drawer) It shall be vertical Filing Cabinets which use less floor space. All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10).

Chair CBA Steel (Classic Cane Chair with Arm Rest), Make-Godrej, Size (HxWxD) 88.0 cm x 58.0 cm x 57.5 cm) Seat/back assembly: The seat and back should be made from seasoned wood, knitted with cane and finished with synthetic paint (black). Back size: 45.7 cm. (W) X 39.0cm. (H). Seat size: 45.7 cm. (W) X 42.4cm. (D). Cane for seat/back: Cane should be produced from blends of High and Low density Polyethylene. The Cane high tensile strength at break = 1400 Kg/cm2 (min.) & Elongation at break = 54% maximum. Armrest tube: The armrest tube should be made of 0 2.54 ± 0.03cm. x 0.2 ± 0.016cm.thk. M.S. E.R.W. tube and welded to the understructure assy. Arm rest: The armrest should be injection moulded from black Polypropylene. Understructure assembly: The understructure assembly should be a cantilever type frame made of 0 2.54 ± 0.03cm. x 0.2 ± 0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-60 microns). Seat Height - 45.0 cm.

Stand for Magazine/News Paper, Make- Crystal or equivalent , (Crystal News Paper Reading Stand Double sided) Size (HxWxD) 1410mm x 900mm x 870 mm) & size of each reading surface 760 mm x 660 mm

Table Office Clerk Steel (Table T-9), Make-Godrej, Size (WxDxH) 1365 x 680 x 735 mm The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides. Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube. Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic.

TV Stand (Meraki Media Unit Brn/Beige), Make-Godrej, Size (WxDxH) 180.4 cm x 49.5 cm x 50.4 cm) Material: All carcass panel shall be made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Drawer bottom shall be made of .9 mm thick prelaminated particle board. Drawer front shall be made of 18 mm thick PU painted MDF. Middle doors shall be made of 4mm thick toughened glass with PU paint in black. All drawers shall be fitted with knobs. Legs : Rubber wood Hardware : Hettich Construction : Knock down Finish : All 18 mm prelaminated particle board panels shall be Versaillies with walnut edge band. PU lamination shall be high gloss in Ecru shade.

Door Mat (Door Mat 4' x 2'), Material of construction- polypropylene fibre with anti-slip backing. Minimum pile height 20mm, premium quality, easy to clean. Colour and design as approved by GE.

Stainless Steel Serving Table with warming facility, Make- Life Star SS Works or equivalent, Size (LxWxH) 5.5' x 25" x 4',2 tier with container bowl- 6 Nos., with twin wheel castors 6 cm dia for legs, SS sheet- 1.5 mm thick minimum , Under structure- 1.5mm thick SS tube

Stool Steel (Height Adj SS Top Round Stool), Make- Godrej, Size (Diagonal Leg dia 538 mm, H 470 mm to 655 mm Top plate shall be of SS 304 sheet with spin section of thickness 1mm & non corrosive. It shall have diameter of 305mm, seat base of MS ring and rectangular tube. EN8 Screw having dia of 22 mm to be used for height adjustment of the seat base. The round hub made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub shall be welded with the legs and it accommodate and cover the lead screw mechanism. The under-structure consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg shall give a round & clean look. All the legs shall be Provided with 4 nos of Nylon-6 bush. All metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating. Safe working load shall be 135kg

Chair CBA/Chair Visitor (Kareena NXT Visitor), Make-Godrej, Size (HxWxD) 93.0 cm x 66.5 cm x 61.6 cm Seat/back assembly: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should be designed with contoured lumber support for comfortable seating posture. Mid back size: 48.0cm.(W) X 64.5cm.(H) Seat size: 51.0cm.(W) X 48.0cm.(D) High Resilience (HR) Polyurethane Foam: The HR polyurethane foam for seat and back should be moulded with density = 45±2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression. Armrests:The armrest top should be made of moulded polyurethane (P.U) and mounted on to a fixed type tubular armrest support which should be chrome plated Finish. Fixed Backrest: The backrest consshould be ts of a fixed type mechanism i.e. no back up/down adjustment. Fixed spine : The seat and backare arrested together with fixed type spine i.e no backup/down adjustment ;made of 0.8 ± 0.05cm thk HR steel ans id back power-coated (DFT 40-60 micros). Tubular visitor frame: The tubular frame is cantilever structure & made of Dia 2.54 ± 0.03cm. X 0.2 ± 0.016cm.thk . M.S. E.R.W. tube with a M.S. Spine mounting bracket welded to it. Back spine is fitted to the assembly. The frame finish is Nickel Chrome plated (15-20 microns). Seat Height - 47.7cm.

Locker Bed Side (Adriana 2Dr Wardrobe Wall), Make-Godrej, Size (WxDxH) 946.0 mm x 598.0 mm x 1941.0 mm Material: Body panels shall be made of 18 mm thick Prelaminated Particle Board. All the exposed edges shall be edge banded with 0.8 mm thick PVC edge banding. Door shall be made of 18 mm thick Prelaminated Particle board with all the exposed edges to be edge banded with 0.8 mm thick PVC edge banding. Side panel shall be made of 18 mm thick Prelaminated Particle board with all the exposed edges edge banded with 0.8 mm thick PVC edge banding and with H.D.F. foil wrapped decorative trim fixed on to it. Drawer components shall be made of 18 mm thick Prelaminated Particle Board. All the exposed edges shall be edge banded with 0.8 mm thick PVC edge banding. Body back and drawer bottom shall be made of 8 mm thick Prelaminated particle board. Top cornice shall be made of H.D.F. foil wrapped decorative Trim. Hardware : The high quality hardware used like Roller slides, Hinges, minifix, wooden dowels is of make Hettich. Lock used for main door shall be 3 way lock and lock used for drawer shall be cam lock Construction : Knock Down construction. Finish : 18 mm thick Prelaminated Particle Board shall be in Walnut shade.

Chair Revolving High Back (La Sede High Back Chair), Make- Godrej, Size (HxDxD) 114.0 cm to 131.5 cm x 76.1 cm x 76.1 cm (Seat Height- 44.5-55.5 cm) Seat/back assembly : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3, and hardness load 16 ± 2 kgf for 25% compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat size: 47.6 cm. (W) x 49.2 cm. (D), Back size: 47.5 cm. (W) x 77 cm. (D) Armrests: The armrest top should be moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81 ± 0.03 cm x 0.2 ± 0.01 cm thick M.S E.R.W tube having chrome plated finish. The armrest height adjustable up to 6.5 ± 0.5cm in 5 steps. Active Bio-Synchro Mechanism: The adjustable tilting mechanism should be designed with the following features: (i) 360° revolving type., (ii) Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort., (iii) Tilt tension adjustment can be operated in seating position. (iv) 5-position Tilt limiter giving option of variable tilt angle to the chair., (v) Seat/back tilting ratio of 1:2, (vi) The mechanism housing should be made up of HPDC Aluminium black powder coated. Seat depth adjustment: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0 ± 0.5 cm. Adjustable back support: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42 ± 0.5 cm for the comfortable back support to suit individual need. Pneumatic ht. Adjustment: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. Pedestal assembly: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) Twin wheel castors: The twin wheel castors should be injection moulded in Black Polypropylene.

Drugget (3m x 2m), woven type, patterned, anti-skid backing, minimum thickness 5mm, material of construction- Jute/wool. Durable, easy to clean. Colour and pattern as approved by GE

Sofa Set 2 Seater (Hexa 2 Seater Sofa), Make-Godrej, Size (HxWxL) 91cm x 88 cm x 132 cm Seat Height 45CM. Cushions shall be Quilted with wooden accents under the armrests. Recron-filled cushions shall provide a comfortable sink in feel with lumbar support. Curved, slender armrests with waterfall edges shall support leaning. It shall be Easy-to-clean and water-proof upholstery withstands daily usage

Aluminium single sided A shape platform step Ladder, Make-Liberti ladders/ Allied ladders/ Bathla/ Plantex/ Prime. Heavy duty, slip resistant with end caps, Capacity 110 Kgs, Size- Height 5.8', Step Width 2.5"

P K ENTERPRISES (BID ID -3393385)

M/S SRIKSHTI SALES CORPORATION (BID ID -3386454)