Sarswati Nagar Bhitari me rajnarayan mastar ke ghar se janardan shrivastav v adarsh mishra ji ke ghar hote hue akhilesh ji ke ghar tak siwar ka karya

E/w in excavation in foundation in o/s including lift upto 1.50m and lead upto 30m and including filling watering and ramming of excavated earth into space between the building and sides of foundation trenches or into plingth and removal and disposal of suplus earth as directed by engineer in charge upto a distance of 30 m from the foundation trenches I/c T&P as per S.I no 251

Concrete with 4cm gauge approved stone ballast approved coarse sand and cement in proportion of 8:4:1 including supply of all materials labours and tools and plants etc. required for proper completion of the work I/c as per S.I no 281

Class M-150 Brick work in 1:4 Cement and Fine sand of 1.25FM.morter in foundation I/C all complete as per SI NO.(305)

12 mm Thick Plastering in 1:4 Cement and fine sand morter on rough surface I/C all complete as per S.I NO 584

P/L of 110 mm Ф P.V.C. pipe. With ISI marks I/c

Concrete with 20 mm gauge approved stone grite approved coarse sand and cement in the proportion of 4:2:1 i/c supply of all materials, labour & T & P etc. required for completion of work. SI No. 279(B).

Supply of informatory M.s sign board size 1.20*0.90 m made of 0.80mm M.s sheet fixed in ISA 40*40*5mm,frame supported in back side by 32*5mm flat iron on all four side along with two vertical post of 2.90m from bottom of frame of angle iron ISA 40*40*5mm with 0.25m long horizontal leg electrically welded and painted with one coat synthetic enamel paint I/c

Rcc work with cement approved coarse sand and 2cm gauge approved stone ballast in the proportion of 1:2:4 in slabs excluding its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work binding wire to be supplied by the contractor free of cost I/c as per S.I no 284

Mild steel or iron work in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage.Bend hooks and authorised overlapping shall be measured I/c as per S.I no 504

Supply of 350 mm dia of Rcc hume pipe NP-3 including collars/spigot & socketed type joints , confirming to BIS specification as per IS:458:2003 AS per uppwd S.I no 26