PROVISION OF EXTERNAL FINISHES FOR BUILDINGS NO M, N, S AND T AT NARAINA BAGH, SPECIAL REPAIRS AND INTERNAL FINISHES FOR M BLOCK SAILORS MD ACCN AT NARAINA BAGH AND P10 BLOCK SAILORS MD ACCN AT PALAM BAGH IN THE AOR OF AGE BR NAVY UNDER GE NEW DELH

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises removing rubbish outside MOD land complete all as specified and as directed.

Material and labour for non skid joint free ceramic tiles 7-8 mm thick coloured(square /rectangular) area of each tile exc 0.11sqm but not exc 0.18 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles in vertical surfaces such as skirting and dados of size 300x450x7-8 mm thick, set and jointed in neat cement slurry and pointed with white or coloured cement laid over and including 10mm thick rendering of cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified.

Material and labour for providing cement concrete, type E-2, 1:5:10 (using 40mm graded stone aggregate) as in mass concrete and filling etc complete all as specified and as directed.

Material and labour for providing 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in sub floor/sub base for laying floor finishes/ tiles etc. complete all as specified and as directed.

Taking down cement plaster on brick walls, including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for Polymer modified cementious bonding coat , prepared and applied on the concrete/ masonry surfaces with I part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight complete all as specified and as directed. Note: Coverage of SBR latex-0.25Ltr / sqm for one coat.

Material and labour for 15 mm thick polymer modified plaster in cement mortar (1:4) on fair faces of brickwork or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and as directed. Note: SBR latex shall be measured and paid separately

Supply only Styrene Butadiene Rubber latex emulsion.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of Exterior Emulsion paint over one coat of primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint over one coat of primer and over and including one coat of putty complete all as specified and as directed.

Material and labour for preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper on walls over a coat of primer and over and including one coat of putty complete all as specified and as directed.

Supply and fix GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling, stachions, beams etc including all laps, cutting and waste complete all as specified and as directed.

Material and labour for 10 mm thick polymer modified plaster in cement mortar (1:4) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and as directed. Note: SBR latex shall be measured and paid separately

Material and labour for preparation of new plastered or un-plastered surface of ceiling and applying two coats of oil bound distemper over a coat of primer and over and including one coat of putty complete all as specified and as directed.

Material and labour for preparation of new plastered or un-plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

Dismantling of 100/75 mm cast iron or reinforced concrete drain pipes, jointed in cement mortar including all fittings and taking out of trenches, if required, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply and fix 110 mm PVC (SWR) pipes with wall thickness exceeding 5 mm, single socketed in any length with rubber ring joints fixed to walls or laid in floors, including cutting chases and making good and fixed complete all as specified and as directed.

Supply and fix 110 mm PVC (SWR) bends any radius with wall thickness exceeding 5 mm complete all as specified and as directed.

Supply and fix 110 mm PVC (SWR) bends any radius with wall thickness exceeding 5 mm with access door complete all as specified and as directed.

Supply and fix 110 mm PVC (SWR) branch piece single (single Y), with wall thickness exceeding 5 mm equal or unequal any radius including access door complete all as specified and as directed.

S & F PVC (SWR) floor trap for 100mm diameter of outlet, with wall thickness exceeding 5 mm with stainless steel grating of 100 mm including jointing with solvent cement complete all as specified and as directed.

Supply and fix 150mm PTMT Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry (minimum weight 100 gms) complete all as specified and as directed.

Supply and fix MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165

Material and labour for complete removal of existing treatment from old surfaces of wall and applying two coats of oil bound distemper over a coat of primer and over and including one coat of putty complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old surfaces of wall and applying two coats of Exterior Emulsion paint over one coat of primer over and including one coat of putty complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old surfaces of ceiling and applying two coats of oil bound distemper on walls over a coat of primer and over and including one coat of putty complete all as specified and as directed.

Material and labour for preparation of old wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old steel and iron surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

Material and labour for 18 mm thick granite (of any type) machine cut as in platforms, stage top etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed.

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick as in kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including PVC waste pipe and CP waste fitting, overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and as directed.

Supply and fix in repairs Stainless steel plate rack made of stainless steel 1mm thick 900mmx 600mm complete all as specified and as directed.

Supply and fix in repair stainless steel curtain rod 25 mm dia with two numbers stainless steel brackets and stainless steel end caps, fixed on wall with nylon sleeves and screws complete all as specified.

Taking up or down 15mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chauging in wall/floor or removal to store complete all as specified and as directed.

Taking up or down 20mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chauging in wall/floor or removal to store complete all as specified and as directed.

Supply and fix 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed.

Supply and fix 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed.

Supply and fix in repairs 15 mm dia brass chromium plated Bib tap fancy type chromium plated complete all as specified and as directed.

Supply and fix in repairs 15 mm dia cast copper alloy fancy type chromium plated stop cock long shank concealed type complete all as specified and as directed.

Supply and fix in repairs 15 mm dia cast copper alloy chromium plated angle cock with long shank and cup complete all as specified and as directed.

Supply and fix in repairs ball valve of PVC complete with aluminium rod with polyster ball for 20 mm dia iron pipe complete all as specified and as directed.

Supply and fix in repairs chromium plated brass shower rose 125 mm with swivel joint and shower Arm complete all as specified and as directed.

Supply and fix in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with cast iron 'P' or 'S' trap including provision of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and as directed. Make: CERA, Hind ware, Parryware

Supply and fix in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and as directed.

Supply and fix in repairs PVC connection 15 mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and as directed.

Material and labour for 20mm dia CP finish brass alloy towel rail, 600mm long complete all as specified and as directed.

Dismantling water tanks exc 250 ltr but n.exc 500 ltr and removal from site complete all as specified and as directed.

Dismantling water tanks exc 500 ltr but n.exc 1000 ltr and removal from site complete all as specified and as directed.

Supply and fix 500 litres capacity Rotational moulded polyethylene five layered water storage tanks (Cylindrical vertical with threaded top cover) white or blue in colour, pure anti bacterial film inside of tank, hoisted & fixed in position including Tank Nipple and with union (Two Nos each) , fittings complete all as specified and as directed. Make of tank :- Sintex/Rotex/Polywell

Supply and fix 1000 litres capacity Rotational moulded polyethylene five layered water storage tanks (Cylindrical vertical with threaded top cover) white or blue in colour, pure anti bacterial film inside of tank, hoisted & fixed in position including Tank Nipple and with union (Two Nos each) , fittings complete all as specified and as directed. Make of tank :- Sintex/Rotex/Polywell

Supply and fix in repairs 20mm bore gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description and any position not otherwise provided for complete all as specified and as directed.

Supply and fix mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply and fix 6.00 mm thick mild steel, plain, black sheet in water tank platform and similar work, cut to size, holes punched; including welding to steel framing with including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC Door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side as gap insert for top rails, bottom rail,panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supply & fixing in the frame at site as per specification and drg.

Taking down chowkhat with shutter (without taking off shutters from the frame) exc 1.5 sqm but nexc 4.00 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

All as per item no. 63.00 here-in-before but nexc 1.00 sqm each complete all as specified and as directed.

Supply and fix 35mm thick 2nd class glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a)

Supply and fix 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkats complete all as specified and as directed.

Supply and fix MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hook s and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, Fe 410-W (Gde-E-250) quality.

Material and labour for providing cement concrete type B-I,1:2:4 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 of SSR-I 2009 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Supply and fix 18 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including teak wood edging all round the shutter/shelves etc and polishing the edging as in cub boards shelves and shutter etc all as directed.

Supply and fix butt hinges100mm medium weight, cold rolled, mild steel complete all as specified and as directed.

Supply and fix Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps 40mm (when open) complete all as specified and as directed.

Supply and fix aluminium handles cast type anodised 150mm ISI Marked complete all as specified and as directed.

Supply and fix aluminium handles cast type anodised 100 mm size of handle complete all as specified and as directed.

Supply and fix 200mm aluminium anodised barrel tower bolts of extruded section ISI Marked complete all as specified and as directed.

Supply and fix floor door stopper of aluminium alloy body with double legs and 100mm long fixed with screws to shutters complete all as specified and as directed.

Supply and fix in repairs floor door stopper of aluminium alloy body with double legs and 100mm long fixed with screws to shutters complete all as specified and as directed.

Supply and fix aluminium anodized hasp & staple of 100 mm size safety type including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fix Alum anodised grill made of 6mm dia aluminium bars, size of mesh 100mm by 100mm fixed together with aluminium U channel thick all round the grill complete fixed in position

Supply and fix powder coated aluminium 3 track bombay sliding window 2 bays made out of hollow extruded aluminum section as mentioned below and glazed with 5 mm thick clear glass and stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed together with aluminium anodised mesh 10x10x1.0mm thick fixed with rubber beading/gasket and aluminium anodised beading all around and lock type handle of size 75mm, provision of rollers with track etc complete all as specified and directed make Jindal/Indel (a) Chowkat/frme - size 63.50mm x 38mm x 1.6mm thick (b) Shutter top and bottom rail - size 37.50 x 15 x 1.00 mm thick (3 set shutter) (c) Shutter inner rail - size 37.50 x 15 x 1.00 mm thick (for 3 set shutter)

Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed.

Supply and fix powder coated aluminium ventilators chowkhat made out of hollow extruded aluminum section 63.50 x 38.10 x 1.60 mm thick & shutter made of section 47.00 x 44.45 x 1.60 mm thick complete with 2 no 75 mm Aluminum Hinge 2 Nos 150 mm long Aluminum anodised tower bolt & Aluminium stay. One no 100mm Aluminum anodised D type alum Handle and 3 mm thick frosted glass and stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm including fixed together with aluminium anodised mesh 10x10x1.0mm thick in each shutter of vents. The make of glass Saint Gobain/Modiguard/Atul. The rate including rubber packing/Aluminum beading around glass complete with rubber packing Gasket & glazing clip . All section shall be of JINDAL or Equivalent in Hindalco/Indel.

(a) Material and labour cleaning the surface, remove dust dirt, loose particles and unsound substrate and providing 20mm thick cement screed (1:4) mixed with Dr Fixit STP tonic liquid 200 gram/Bag over Dr Fixit bonding coat MPB .(b) Applying primer coat with solvent based bitumen primer @ 3.50 ltr/XSqm.(c) Align Dr Fixit/STP torch shield water proofing 3mm thick membrane using gas burner to heat substrate, pressing firmly from lower end to upper end with 100mm over lap.(d) Heat both overlap with round trowel to seal over lap excess compound smoothened, pressed into seam using hot trowel.(e) Seal edges well into grooves & protect with cement mortar 1:2.

Material and labour for precast PCC plain tile 20mm thick and each tiles exc 0.02 sqm and n.exc 0.09 sqm machine made laid over & including cement mortar screed 15mm thick in cement mortar 1:6 mixed with water proofing compound and jointed pointed in cement mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and as directed.

Supply and fix PVC chhajja (factory made) exc 0.2 sqm and not exc 0.6 sqm and fastener 150mm long with complete set as per sample including demolition of old RCC chhajja complete all as specified and as directed. Note: Work has to be executed up to (G + 3 storey) building

Demolition cement concrete(reinforced) in ground floors and upto 4 storey of any description and in any position including MS pipes Scaffolding and making arrangements with hessian clothes for protection from falling of concrete & all other saftey precautions complete all as specified and as directed.

Removing building materials /old waste unwanted existing material of any description or any type etc. (other than spoil payable under items 03028 to 03031 in Section-3-Earthwork of SSR-2009 Part-I) to a distance of 5km or beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

Material and labour for expanded metal, cut to length, bent to shape required of mild steel wire mesh / welded mesh and tying with and including annealed mild steel wire not less than 0.9mm dia binding wire or galvanised wire staples complete to existing reinforcement or steel members. (mesh weight not exceeding 4.00 Kg/Sqm) complete all as specified and as directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & addl reinforcement if required measured and paid separately) Note :-Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to Four storey building.

M & L uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets and roof of buildings and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. Note: Work has to be executed up to (G + 3 storey) buildings Note for item No 01 to 92 :- The work described in these items shall be executed in buildings upto (G+3 floor) hence the contractor shall make arrangements with hessian clothes for protection from falling of concrete & all other saftey precautions and the rates are deemed to be included in the quoted unit rates.

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and as directed.

Material and labour for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories, provision of new galvanised MS sunken box and new hylum sheet 3 mm thick of suitable size, ISI marked for housing the switches and sockets, for the following as mentioned in item no. 94.01 to 94.05 :-

One light/fan/exhaust fan point controlled by one nos, one way switch.

One light point controlled by one nos of two way switch.

One bell/buzzer point controlled by one bell push

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board

All as per item No. 94.00 here-in-before but with 2.5 sqmm (for phase, neutral) and 1.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket outlet point on independent board complete all as specified and as directed.

All as per item No. 94.00 here-in-before but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable on independent circuit complete all as specified and as directed.

Supply and fix in replacement of following switch, piano type,flush mounted 230/250 volts grade, on top covers (catered in point wiring above) as mentioned in item no. 97.01 to 97.04 beolw :-

Single pole, one way piano type,flush mounted switch, 5 Amp rating make:-Anchor/Cona/Havells

Supply and fix bell push 6A with Neon flush type 240 volts all as specified.make:-Anchor/Cona/Havells

Single pole, two way,piano type, flush mounted switch,5 Amp rating make:-Anchor/Cona/Havells

Single pole, one way,piano type,flush mounted switch,15 Amp rating make:-Anchor/Cona/Havells

Supply and fix in replacement of socket outlet, multipurpose type, non-shuttered, non-interlocking, flush mounting type, 230/250 volts grade on top covers (catered in point wiring above) :-

3 Pin 5 Amp socket outlet (with 2 pin outlet also) make:-Anchor/Cona/Havells

5 Pin 15 Amp & 5 Amp multipurpose socket outlet make:-Anchor/Cona/Havells

Supply and fix metal clad single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 20 Amp, 230 volts complete all as specified MAKE:-product code-5078 11 of Legrand/Havells/Indoasian.

Supply and fix in replacment of ceiling rose 3 terminal / PVC/ Polycarbonate, insulated body ISI Marked.

Disconnecting mains connection and taking out old distribution board 8/12 way SPN with 200 amp rated bus bar.

Supply and fix in replacment of factory made, sheet steel distribution boards,SPN 12 ways. double door, suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar make-product code-5076 11 of Legrand/Havells/Indoasian.

Supply and fix in replacment of MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :- Note : Make of the MCB should be the same as that of DB

MCB SP 10 to 32 Amps MAKE:-product code-4085 90 of Legrand/Havells/Indoasian.

MCB SP 40 to 63 Amps MAKE:-product code-4085 90 of Legrand/Havells/Indoasian.

MCB SPN 40 to 63 Amps MAKE:-product code-4086 18 of Legrand/Havells/Indoasian.

Supply and fix in replacement LED Tube light fitting 9 watt ( 2 ft ) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductorr cable all as specified make CG Cat Part No LCTL-9-CDL, Halonix cat part No-HLB-E41-03-10-CW-AL,Havells cat part No-LHEXBQP7IN1W009

Supply and fix LED Tube Light of 18 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified.Make-CG cat part no.-LCTL-18-CDL,Havells cat aprt No-LHWEBP7IN1W020,Halonix cat part No-HLB-03-40-CW-AL

Supply and fix LED Mirror light of 3.6 Watt 230Volt ,chrome colour complete with E14 lamp base & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified.Make-Philips cat part no.-34034/14/86 or equivalent in CG/HAVELLS .

Supply and fix LED Bulkhead fitting of 10Watt 230Volt , complete with LED e Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified.Make-CG cat part no.-LBHP-10-CDL, equivalent in Havells/Philips.

Material and labour for taking down of ceiling fan/exhaust fan of any size and servicing complete, greesing, painting ,changing of ball bearing of any type,Copper rewinding (if required)and marking of MES No. etc at site and refixing complete all as directed by Engr- in -charge.

Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc. as required make:-Anchor/Cona/Havells

S&F electric bell AC 230 Volt comlete all as specified and directed by Engr - in - Charge all as specified.make:-Anchor/Cona/Havells

G M CONSTRUCTION COMPANY

Ex Serviceman Enterprises