Amrut 2.O Scheme 2022-2023

Amount

Earth work excavation for foundation and depositing on bank for refilling within an initial lead of 10.00 m and an initial lift of 2.00 in hard stiff clay. Stiff black cotton soil, hard red earth, sales, murrams, gravel, stoney earth, earth mixed with small sized boulders and hard gravelly soil and except hard rock requiring blasting including shoring, strutting, bailing water wherever necessary and all other incidental charges etc., complete as directed by departmental officers as per S.S.20B

First depth

Second depth

Supplying and filling with good Stone Dust from approved quarry including cost and conveyance of all materials and all labour charges for filling, watering & consolidation etc., complete as per standard specification

Plain Cement Concrete 1:4:8 mix, (one part of cement, four part of M.sand and eight part of aggregate) mix using 40mm ISS HBG metal from approved Quarry including cost and conveyance of all materials and all labour charges for mixing, laying, compacting and curing the concrete and other incidental charges etc., complete. as per standard specification 28 V,VI S25

Cement Concrete M30 design mix concrete (Approximately for one cum of concrete 400 kg of cment, 0.47 cum of sand with bulkage and wastage, 0.57 cum of HBG ston of 20 mm size ,0.28 cum of HBG stone of 10 mm size are to be used ) for the following members (excluding the cost of RTS grills for reinforcement, centering and shuttering, strutting,) but including cost of mixing, laying of concrete, vibrating with mechanical vibrators, ramming consolidating finishing, curing etc., complete complying with relevent standard specification and as directed by Departmental Officers.

1) Up to 1.50 M Below GL

2) Beyond 1.50M to 4.50 M Below GL

3)0.0 M to 4.50M Above GL

4) 4.50M to 7.32M Above GL

5) 7.32M to 10.98M Above GL

6) 10.98M to 14.64M Above GL

7) 14.64M to 18.30M Above GL

8)18.30M to 21.96M Above GL

Supply and erection of steel centering, shuttering for soffits and sides including necessary support strutting for all RCC works using MS sheets of suitable size of BG 10 stiffened with MS angle of size 25x25x3mm for boarding laid over Silver Oak joists of size 10cmx6.5cm space at 10cm c/cand supported by Casurino Prop 10cm-13cm spaced at 75cm c/c etc., complete and as directed by Departmental Officers.

1) Steel centering for 0 to 3.30 m (Plane surface)

2) Steel centering plane surface 3.30 m to 4.30m

2) Steel centering plane surface 5.30 m to 6.30m

3)Steel centering plane surface 6.30 m to 7.30m

3)Steel centering plane surface 8.30 m to 9.30m

3)Steel centering plane surface 10.30 m to 11.30m

4)Steel centering plane surface 11.30 m to 12.30m

4)Steel centering plane surface 15.30 m to 16.30m

5)Steel centering square column 0 m to 3.30m

6)Steel centering square column 3.30 m to 4.30m

7)Steel centering square column 4.30 m to 5.30m

8)Steel centering square column 5.30 m to 6.30m

9)Steel centering square column 6.30 m to 7.30m

10)Steel centering square column 7.30 m to 8.30m

11)Steel centering square column 8.30 m to 9.30m

12)Steel centering square column 9.30 m to 10.30m

13)Steel centering square column 10.30 m to 11.30m

14)Steel centering square column 11.30 m to 12.30m

15)Steel centering square column 12.30 m to 13.30m

16)Steel centering square column 13.30 m to 14.30m

17)Steel centering square column 14.30 m to 15.30m

18)Steel centering up to I LL Curved surface 0 m to 3.30m

18)Steel centering up to I LL Curved surface 3.30 m to 4.30m

19)Steel centering Round column 0 m to 3.30m

20)Steel centering Round column 3.30 m to 4.30m

21)Steel centering Round column 4.30 m to 5.30m

22)Steel centering Round column 5.30 m to 6.30m

23)Steel centering Round column 6.30 m to 7.30m

24)Steel centering Round column 7.30 m to 8.30m

25)Steel centering Round column 8.30 m to 9.30m

26)Steel centering Round column 9.30 m to 10.30m

27)Steel centering Round column 10.30 m to 11.30m

28)Steel centering Round column 11.30 m to 12.30m

29)Steel centering Round column 12.30 m to 13.30m

30)Steel centering Round column 13.30 m to 14.30m

31)Steel centering Round column 14.30 m to 15.30m

Supply and fabrication of steel using TMT rods for all Reinforced cement concrete works including cost and conveyance of all materials and all labour charges for cutting, bending and placing the rod in position and tying up the rods with binding wire and other incidental charges etc., complete. as per standard specification SS 86 & 86A V,VI, VII (S6) 7,3

Supplying and Fixing in Position of Cut Stone set in Cm 1:3 using well dressed cut stone supporting inlet pipe inside the tank and as directed by the officers

Provision for pipe connection arrangements for inlet outlet, scour and overflow etc., includeing cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc., complete as detailed below.

80mm Gipipe

80mm GI Coupling

80mm GI Bend

80mm GI Flange Set

80mm GM Gate Valve

65mm GM Gate Valve

150mm GI Pipes

150mm GI Coupling

150mm GI Bend

100mm GI Pipes

100mm GI Coupling

100mm GI Bend

100mm GI Flange Set

150 mm GM Gate Valve

100 mm GM Gate Valve

Construction of Sprial Staircase (Separate Sheet Enclosed)

Supply and delivery and fixing position of CI man hole cover and frame of Size 60x60cm on roof slab and as directed by the officers The manhole frame and cover should be of light duty and conforming to ISI 1726/1974

Supply and Delivery and Fixing in Position of 150mm dia AC Ventilators on the roof Slab and as directed by the officers

Refilling the Foundation for Service reservoir with excavated earth (other than sand) in layers of 15cm thick well rammed,watering and consoildating etc Complete complying with standard Specification as directed by the officers

Providing and fixing RCC inside access ladder of approved pattern and design in RCC 1:1.5:3 design mix of ISS gauge 0.40m width, 0.10m thickness, 0.12m breadth for side post, 0.05m thickness 0.12m breadth for steps with suitable inclination including cost of cement, reinforcement centering, finishing, curing etc., complete and as directed by dept Officers.

Providing RCC Handrails of approved quality including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification

Painting two coats with Emulsion paint of approved colour and quality including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification

Supply of DI. HDPE pipe & Specials including cost and conveyance of all materials and labour charges etc complete as per standard specification as per IS 4985 / 2000 , 10124/1982 Part-II and 1239/PART I/90

90 mm HDPE Pipe line PIN 6

110 mm HDPE Pipe line PIN 6

160 mm HDPE Pipe line PIN 6

100 mm DI Pipe K7

150 mm DI Pipe K7

90 mm HDPE Bend 90 Deg

110 mm HDPE Bend 90 Deg

160 mm HDPE Bend 90 Deg

90 mm HDPE TEE

110 mm HDPE TEE

160 mm HDPE TEE

100 mm DI Sluice Valve

100 mm GM Gate Valve

80mm CI Double Air Valve

80 mm GI Flange Set

90 mm MJ Collor

100 mm DI D/F Gate Valves

Construction of Valve Pit of approved size in all respects including cost and conveyance of all materials and labour charges to site etc., complete

Sluice Valve

Scour Valve

Air Release Valve

Construction of DMA Chamber of approved size in all respects including cost and conveyance of all materials and labour charges to site etc., complete

Lowering of HDPE Pipe with specials into trench to require slope, gradient, alignment and testing to required pressure including cost and conveyance of all materials and labour charges to site etc., complete

90 mm HDPE Pipe line PIN 6

110 mm HDPE Pipe line PIN 6

160 mm HDPE Pipe line PIN 6

Lowering of DI Pipe with specials into trench to require slope, gradient, alignment and testing to required pressure including cost and conveyance of all materials and labour charges to site etc., complete

100 mm DI Pipe K7

150 mm DI Pipe K7

Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by Departmental Officers.

90 mm HDPE Pipe line PIN 6

110 mm HDPE Pipe line PIN 6

160 mm HDPE Pipe line PIN 6

Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials) etc., complete as per directed by Departmental Officers.

100 mm DI Pipe K7

150 mm DI Pipe K7

Testing of HDPE/ DI pipes with hydraulic testing equipment by filling with water (including cost of water) and testing to recommended pressure in convenient stetches and attending the bursts if any occurred during the test, excluding the cost of pipes, including other incidental and operational charges etc. complete

90 mm HDPE Pipe line PIN 6

110 mm HDPE Pipe line PIN 6

160 mm HDPE Pipe line PIN 6

100 mm DI Pipe K7

150 mm DI Pipe K7

Barricading work (Where, there is less traffic areas and broader roads etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia and 1.80m height) vertical with horizontal poles in three rowsincluding painting the vertical poles in the roadfacing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including fixing charges and fixing 75mm dia reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete Pg.no:302 TWAD

Barricading work (Where the lines are in narrow width of municipality area, busy streets like Market, Bus-stand and in the Highways etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia. and 1.80m height) vertical with horizontal poles in two rows, painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including supplying, delivery and fixing of GI sheet (0.90m x 0.8mm thick) in the horizontal poles and fixing 75mm dia. reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete Pg.no:302 TWAD

Labour for cutting CC roads for laying pipes and specials etc., complete as per standard specifications and as directed by the Departmental Engineer.

Labour for cutting BT roads for laying pipes and specials etc., complete as per standard specifications and as directed by the Departmental Engineer.

Pilot valve system having Stainless Steel / Brass fittings with spring of stainless steel 304 as per standard parts according to DIN EN 12 266-1 and Stainless steel 316 orifice plate shall be as per the set point of flow rate, all the external control tubing of SS 304 / Copper/ reinforced plastic rated PN16, Tightness to DIN EN 12 266-1, leakage rate A (or) equivalent and the needle valve/ speed control device should be provided to vary opening speed of the main diaphragm with self-cleaning filter to avoid possibility of dirt build up inside the control tubing.

Installation and commissioning of the Pressure/Flow Control Valve along with control interface UNIT with commissioning accessories as per the technical specification.

Supply and fixing for steel lader..,

Installation and commissioning of the Pressure/Flow Control Valve along with control interface UNIT with commissioning accessories as per the technical specification.

Plain Cement Concrete 1:2:4 mix, (one part of cement, two part of M.sand and four part of aggregate) mix using 40mm ISS HBG metal from approved Quarry including cost and conveyance of all materials and all labour charges for mixing, laying, compacting and curing the concrete and other incidental charges etc., complete. as per standard specification 28 V,VI S25

Provision for HSC BT Road

Provision for HSC CC Road

RAGHURAM HUME PIPES PRIVATE LIMITED