Construction of New Court Building At. Malshiras Tal. Malshiras, Dist.Solapur

Amount

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (including all leads and lifts) by Mechanical Means.

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (including all leads and lifts) by Mechanical Means.

Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (including all leads and lifts) by Mechanical Means.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 meters beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/ murum, ramming, watering including shoring and strutting etc. complete. (including all leads and lifts) by Mechanical Means.

Excavation for foundation in laterite rock (soft or hard) including trimming and levelling the bed for the foundation, removing the excavated material up to a distance of 50 metres beyond the building area, stacking as directed, dewatering and back filling with available murum, watering, ramming etc. complete, (including all leads and lifts) by Mechanical Means.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabledconcrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural sand.)

Providing and laying in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand.)

Providing and laying cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand) Stilt/Ground Floor

Providing and laying cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand) First Floor

Providing and laying cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand) Second Floor

Providing and laying cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand) Third Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand) Stilt/Ground Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand) First Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand) Second Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand) Third Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Stilt/Ground Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) First Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Second Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Third Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin ). Stilt/Ground Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin ). First Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin ). Second Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin ). Third Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Stilt/Ground Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) First Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Second Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Third Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Stilt/Ground Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) First Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Second Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Third Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Canopy as per detailed designs and drawings including centering, formwork, laying/ pumping, compacting and roughening the surface if special finish is to be provided and curing etc. complete (excluding reinforcement), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Stilt/Ground Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Canopy as per detailed designs and drawings including centering, formwork, laying/ pumping, compacting and roughening the surface if special finish is to be provided and curing etc. complete (excluding reinforcement), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Second Floor

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Canopy as per detailed designs and drawings including centering, formwork, laying/ pumping, compacting and roughening the surface if special finish is to be provided and curing etc. complete (excluding reinforcement), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Third Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap /granite / gneiss/ quartzite metal for Reinforced Cement Concrete Arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. Stilt/Ground Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap /granite / gneiss/ quartzite metal for Reinforced Cement Concrete Arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. First Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap /granite / gneiss/ quartzite metal for Reinforced Cement Concrete Arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. Second Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap /granite / gneiss/ quartzite metal for Reinforced Cement Concrete Arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. Third Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / granite /gneiss / quartzite metal for Reinforced Cement Concrete Fins of required thickness in position as shown on the drawings or as directed by Engineer-in-charge including steel centering, plywood / steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. Stilt/Ground Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / granite /gneiss / quartzite metal for Reinforced Cement Concrete Fins of required thickness in position as shown on the drawings or as directed by Engineer-in-charge including steel centering, plywood / steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.First Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / granite /gneiss / quartzite metal for Reinforced Cement Concrete Fins of required thickness in position as shown on the drawings or as directed by Engineer-in-charge including steel centering, plywood / steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. Second Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / granite /gneiss / quartzite metal for Reinforced Cement Concrete Fins of required thickness in position as shown on the drawings or as directed by Engineer-in-charge including steel centering, plywood / steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. Third Floor

Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Stilt/Ground Floor

Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. First Floor

Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Second Floor

Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Third Floor

Providing second class Burnt Brick masonry with conventional /Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering complete. ( Natural sand )

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.

Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etc. complete.

Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 centimetre to 20 centimetre including watering and compaction etc. complete.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etc. complete.

Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. ( Natural sand ) Stilt/Ground Floor

Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. ( Natural sand ) First Floor

Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. ( Natural sand ) Second Floor

Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. ( Natural sand ) Third Floor

Providing second class Burnt Brick masonry with conventional /I. S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 milimetre diameter / 2 hoop iron strips 25 milimetre x 1.6 milimetre at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering complete. ( Natural sand ) Stilt/Ground Floor

Providing second class Burnt Brick masonry with conventional /I. S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 milimetre diameter / 2 hoop iron strips 25 milimetre x 1.6 milimetre at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering complete. ( Natural sand ) First Floor

Providing second class Burnt Brick masonry with conventional /I. S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 milimetre diameter / 2 hoop iron strips 25 milimetre x 1.6 milimetre at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering complete. ( Natural sand )Second Floor

Providing second class Burnt Brick masonry with conventional /I. S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 milimetre diameter / 2 hoop iron strips 25 milimetre x 1.6 milimetre at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering complete. ( Natural sand ) Third Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/ pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) First Floor

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/ pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand) Third Floor

Providing internal cement plaster 20 mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. ( Natural sand ) Stilt/Ground Floor

Providing internal cement plaster 20 mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. ( Natural sand ) First Floor

Providing internal cement plaster 20 mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. ( Natural sand ) Second Floor

Providing internal cement plaster 20 mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. ( Natural sand ) Third Floor

Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. ( Natural sand ) Stilt/Ground Floor

Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. ( Natural sand ) First Floor

Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. ( Natural sand ) Second Floor

Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. ( Natural sand ) Third Floor

Providing and applying Two coats of wall care Putty of 2 milimetre thickness for plastered surface and 5-6 milimetre thickness finished concrete surface to Ceiling and Walls to prepare surface even and smooth of Brands BIRLA WHITE, BERGER, BISION, J.K., make, etc complete for plastered walls/ceiling 2 milimetre Stilt/Ground Floor

Providing and applying Two coats of wall care Putty of 2 milimetre thickness for plastered surface and 5-6 milimetre thickness finished concrete surface to Ceiling and Walls to prepare surface even and smooth of Brands BIRLA WHITE, BERGER, BISION, J.K., make, etc complete for plastered walls/ceiling 2 milimetre First Floor

Providing and applying Two coats of wall care Putty of 2 milimetre thickness for plastered surface and 5-6 milimetre thickness finished concrete surface to Ceiling and Walls to prepare surface even and smooth of Brands BIRLA WHITE, BERGER, BISION, J.K., make, etc complete for plastered walls/ceiling 2 milimetre Second Floor

Providing and applying Two coats of wall care Putty of 2 milimetre thickness for plastered surface and 5-6 milimetre thickness finished concrete surface to Ceiling and Walls to prepare surface even and smooth of Brands BIRLA WHITE, BERGER, BISION, J.K., make, etc complete for plastered walls/ceiling 2 milimetre Third Floor

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete . Stilt/Ground Floor

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete First Floor

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete . Second Floor

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. Third Floor

Providing fine cement finish 1.5 milimetre thick over green plaster surface including scaffolding curing etc. complete.. Stilt/Ground Floor

Providing fine cement finish 1.5 milimetre thick over green plaster surface including scaffolding curing etc. complete.. First Floor

Providing fine cement finish 1.5 milimetre thick over green plaster surface including scaffolding curing etc. complete.. Second Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. ( Natural sand ) Stilt/Ground Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. ( Natural sand ). First Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. ( Natural sand ). Second Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. ( Natural sand ). Third Floor

Providing and applying Texture plaster with finishing with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface, including Plaster Groove 6 milimetre thickness or Tape Grooves 35 to 45 milimetre thickness or as required, in all position including preparing the surface scaffolding etc.complete. ( Natural sand ) Stilt/Ground Floor

Providing and applying Texture plaster with finishing with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface, including Plaster Groove 6 milimetre thickness or Tape Grooves 35 to 45 milimetre thickness or as required, in all position including preparing the surface scaffolding etc.complete. ( Natural sand ) First Floor

Providing and applying Texture plaster with finishing with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface, including Plaster Groove 6 milimetre thickness or Tape Grooves 35 to 45 milimetre thickness or as required, in all position including preparing the surface scaffolding etc.complete. ( Natural sand ) Second Floor

Providing and applying Texture plaster with finishing with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface, including Plaster Groove 6 milimetre thickness or Tape Grooves 35 to 45 milimetre thickness or as required, in all position including preparing the surface scaffolding etc.complete. ( Natural sand ) Third Floor

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at 1 kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milimetre x 300 milimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. ( Natural sand ) Second Floor

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at 1 kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milimetre x 300 milimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. ( Natural sand ) Third Floor

Providing waterproofing in Water Closet and bath including brick bat coba in all position including providing and laying 12 milimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1kg/ per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. ( Natural sand ) Stilt/Ground Floor

Providing waterproofing in Water Closet and bath including brick bat coba in all position including providing and laying 12 milimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1kg/ per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. ( Natural sand ) First Floor

Providing waterproofing in Water Closet and bath including brick bat coba in all position including providing and laying 12 milimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1kg/ per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. ( Natural sand ) Second Floor

Providing waterproofing in Water Closet and bath including brick bat coba in all position including providing and laying 12 milimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1kg/ per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. ( Natural sand ) Third Floor

Providing waterproof plaster in water closet and bath 12 milimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kilogram per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) ( Natural sand ) Stilt/Ground Floor

Providing waterproof plaster in water closet and bath 12 milimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kilogram per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) ( Natural sand ) First Floor

Providing waterproof plaster in water closet and bath 12 milimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kilogram per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) ( Natural sand ) Second Floor

Providing waterproof plaster in water closet and bath 12 milimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kilogram per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) ( Natural sand ) Third Floor

Poviding and fixing frame with / without ventilator of size as specified with teak wood for doors and windows including chamferring, rounding, rebating, iron holdfast size 300 milimetre x 40 milimetre x 5 milimetre with oil painting complete. Stilt/Ground Floor

Poviding and fixing frame with / without ventilator of size as specified with teak wood for doors and windows including chamferring, rounding, rebating, iron holdfast size 300 milimetre x 40 milimetre x 5 milimetre with oil painting complete. First Floor

Poviding and fixing frame with / without ventilator of size as specified with teak wood for doors and windows including chamferring, rounding, rebating, iron holdfast size 300 milimetre x 40 milimetre x 5 milimetre with oil painting complete. Second Floor

Poviding and fixing frame with / without ventilator of size as specified with teak wood for doors and windows including chamferring, rounding, rebating, iron holdfast size 300 milimetre x 40 milimetre x 5 milimetre with oil painting complete. Third Floor

Providing and fixing the country cut teak wood double or single leaf second class fully pannelled door shutter with 35 milimetre thick style and rail with 25 milimetre thick pannels with openable fan light as per detailed drawings. Excluding the door frame 60 milimetre x 100 milimetre, including stainless steel fixtures and fastening and finishing the wood work with oil panting 3 coats. Stilt/Ground Floor

Providing and fixing the country cut teak wood double or single leaf second class fully pannelled door shutter with 35 milimetre thick style and rail with 25 milimetre thick pannels with openable fan light as per detailed drawings. Excluding the door frame 60 milimetre x 100 milimetre, including stainless steel fixtures and fastening and finishing the wood work with oil panting 3 coats. First Floor

Providing and fixing the country cut teak wood double or single leaf second class fully pannelled door shutter with 35 milimetre thick style and rail with 25 milimetre thick pannels with openable fan light as per detailed drawings. Excluding the door frame 60 milimetre x 100 milimetre, including stainless steel fixtures and fastening and finishing the wood work with oil panting 3 coats. Second Floor

Providing and fixing the country cut teak wood double or single leaf second class fully pannelled door shutter with 35 milimetre thick style and rail with 25 milimetre thick pannels with openable fan light as per detailed drawings. Excluding the door frame 60 milimetre x 100 milimetre, including stainless steel fixtures and fastening and finishing the wood work with oil panting 3 coats. Third Floor

Providing and fixing collapsible steel gate in one/ two leaves with hot rolled vertical channels of 18 x 9 x 3 milimetre minimum size, crossings of mild steel flats of size 18 x 5 milimetre T or E section for runner of minimum 40 x 6 milimetre size for flange, mild steel flat for top runner of minimum size 40 x 12 milimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 milimetre max. spacing of vertical channels be 100 milimetre enclosed gate position and clear space of 150 milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer & oil painting etc. complete. (I.S. 10521-1983).

Providing and fixing the country cut teak wood second class fully glazed openable fanlight rectangular in shape as per detailed drawing excluding the frame, including stainless steel fixtures and fastenings and finishing the wood work with three coats of oil painting. Stilt/Ground Floor

Providing and fixing the country cut teak wood second class fully glazed openable fanlight rectangular in shape as per detailed drawing excluding the frame, including stainless steel fixtures and fastenings and finishing the wood work with three coats of oil painting. First Floor

Providing and fixing the country cut teak wood second class fully glazed openable fanlight rectangular in shape as per detailed drawing excluding the frame, including stainless steel fixtures and fastenings and finishing the wood work with three coats of oil painting. Second Floor

Providing and fixing the country cut teak wood second class fully glazed openable fanlight rectangular in shape as per detailed drawing excluding the frame, including stainless steel fixtures and fastenings and finishing the wood work with three coats of oil painting. Third Floor

Providing and laying telephone black/ Ameter.ba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 milimeter thick for door frame / dado/ window boxing etc. on cemet mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete Stilt/Ground Floor

Providing and laying telephone black/ Ameter.ba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 milimeter thick for door frame / dado/ window boxing etc. on cemet mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete First Floor

Providing and laying telephone black/ Ameter.ba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 milimeter thick for door frame / dado/ window boxing etc. on cemet mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete Second Floor

Providing and laying telephone black/ Ameter.ba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 milimeter thick for door frame / dado/ window boxing etc. on cemet mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete Third Floor

Providing and fixing solid core flush door shutter in single leaf 32 milimeter thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimeter thick on both faces or as directed, all necessary beads, meter.ouldings and lipping, wrought iron hold fasts, chromiume plated fixtures and fastenings, with brass meter.ortise lock, chromiume plated handles on both sides, and finishing with French Polish etc. complete Stilt/Ground Floor

Providing and fixing solid core flush door shutter in single leaf 32 milimeter thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimeter thick on both faces or as directed, all necessary beads, meter.ouldings and lipping, wrought iron hold fasts, chromiume plated fixtures and fastenings, with brass meter.ortise lock, chromiume plated handles on both sides, and finishing with French Polish etc. complete First Floor

Providing and fixing solid core flush door shutter in single leaf 32 milimeter thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimeter thick on both faces or as directed, all necessary beads, meter.ouldings and lipping, wrought iron hold fasts, chromiume plated fixtures and fastenings, with brass meter.ortise lock, chromiume plated handles on both sides, and finishing with French Polish etc. complete Second Floor

Providing and fixing solid core flush door shutter in single leaf 32 milimeter thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimeter thick on both faces or as directed, all necessary beads, meter.ouldings and lipping, wrought iron hold fasts, chromiume plated fixtures and fastenings, with brass meter.ortise lock, chromiume plated handles on both sides, and finishing with French Polish etc. complete Third Floor

Providing and fixing 50milimeter x50milimeter Mild Steel square pipe framed steel windows of various sizes as per details with welded square bars12milimeter at 10centimeter. center to center without hot dip zinc coating without/with ventilator including fabrication,glazing with plain/obscured glass panes 5milimeter thick of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete Stilt/Ground Floor

Providing and fixing 50milimeter x50milimeter Mild Steel square pipe framed steel windows of various sizes as per details with welded square bars12milimeter at 10centimeter. center to center without hot dip zinc coating without/with ventilator including fabrication,glazing with plain/obscured glass panes 5milimeter thick of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete First Floor

Providing and fixing 50milimeter x50milimeter Mild Steel square pipe framed steel windows of various sizes as per details with welded square bars12milimeter at 10centimeter. center to center without hot dip zinc coating without/with ventilator including fabrication,glazing with plain/obscured glass panes 5milimeter thick of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete Second Floor

Providing and fixing 50milimeter x50milimeter Mild Steel square pipe framed steel windows of various sizes as per details with welded square bars12milimeter at 10centimeter. center to center without hot dip zinc coating without/with ventilator including fabrication,glazing with plain/obscured glass panes 5milimeter thick of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete Third Floor

Providing and fixing mild steel grill work for windows, ventilators 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Stilt/Ground Floor

Providing and fixing mild steel grill work for windows, ventilators 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. First Floor

Providing and fixing mild steel grill work for windows, ventilators 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Second Floor

Providing and fixing mild steel grill work for windows, ventilators 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Third Floor

Providing and fixing fibre glass reinforced polyster door shutter 35 milimetre thick as per IS 14856 (2000) (reaffirmed 2006 ) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, complete. Stilt/Ground Floor

Providing and fixing fibre glass reinforced polyster door shutter 35 milimetre thick as per IS 14856 (2000) (reaffirmed 2006 ) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, complete. First Floor

Providing and fixing fibre glass reinforced polyster door shutter 35 milimetre thick as per IS 14856 (2000) (reaffirmed 2006 ) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, complete. Second Floor

Providing and fixing fibre glass reinforced polyster door shutter 35 milimetre thick as per IS 14856 (2000) (reaffirmed 2006 ) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, complete. Third Floor

Providing and fixing in position (as per 1868:1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 kilogram per running metre . Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 kilogram per running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per running metre. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete with colour Anodising with box. Stilt/Ground Floor

Providing and fixing in position (as per 1868:1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 kilogram per running metre . Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 kilogram per running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per running metre. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete with colour Anodising with box. First Floor

Providing and fixing in position (as per 1868:1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 kilogram per running metre . Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 kilogram per running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per running metre. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete with colour Anodising with box. Second Floor

Providing and fixing in position (as per 1868:1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 kilogram per running metre . Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 kilogram per running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per running metre. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete with colour Anodising with box. Third Floor

Supplying and fixing in position Colour Anodized Aluminium four track sliding windows with outer frame made from section of over all size 122 mm x 45 mm, bottom section with drain section track weighing 1.83 kg per metre and top and side section of size 122 x 31.75 mm weighing 1.15 kg per running metre with shutter sections made of 18 mm x 40 mm size having average weight of 0.6 kg per running metre (or as required size) with change in proportionate weight, with 6 mm float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete.Stilt/Ground Floor

Supplying and fixing in position Colour Anodized Aluminium four track sliding windows with outer frame made from section of over all size 122 mm x 45 mm, bottom section with drain section track weighing 1.83 kg per metre and top and side section of size 122 x 31.75 mm weighing 1.15 kg per running metre with shutter sections made of 18 mm x 40 mm size having average weight of 0.6 kg per running metre (or as required size) with change in proportionate weight, with 6 mm float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. First Floor

Supplying and fixing in position Colour Anodized Aluminium four track sliding windows with outer frame made from section of over all size 122 mm x 45 mm, bottom section with drain section track weighing 1.83 kg per metre and top and side section of size 122 x 31.75 mm weighing 1.15 kg per running metre with shutter sections made of 18 mm x 40 mm size having average weight of 0.6 kg per running metre (or as required size) with change in proportionate weight, with 6 mm float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. Second Floor

Supplying and fixing in position Colour Anodized Aluminium four track sliding windows with outer frame made from section of over all size 122 mm x 45 mm, bottom section with drain section track weighing 1.83 kg per metre and top and side section of size 122 x 31.75 mm weighing 1.15 kg per running metre with shutter sections made of 18 mm x 40 mm size having average weight of 0.6 kg per running metre (or as required size) with change in proportionate weight, with 6 mm float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. Third Floor

Providing and fixing black kadappa stone as shelves 25 milimetre thick machine polished, extending the polish upto 20 centimetre width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc. complete. Stilt/Ground Floor

Providing and fixing black kadappa stone as shelves 25 milimetre thick machine polished, extending the polish upto 20 centimetre width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc. complete. First Floor

Providing and fixing black kadappa stone as shelves 25 milimetre thick machine polished, extending the polish upto 20 centimetre width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc. complete. Second Floor

Providing and fixing black kadappa stone as shelves 25 milimetre thick machine polished, extending the polish upto 20 centimetre width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc. complete.Third Floor

Providing and Fixing 900 mm high S.S. 304 Grade Stainless steel railing witjh 40 mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical support spaced at 1.5 m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete. Stilt/Ground Floor

Providing and Fixing 900 mm high S.S. 304 Grade Stainless steel railing witjh 40 mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical support spaced at 1.5 m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete. First Floor

Providing and Fixing 900 mm high S.S. 304 Grade Stainless steel railing witjh 40 mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical support spaced at 1.5 m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete. Second Floor

Providing and Fixing 900 mm high S.S. 304 Grade Stainless steel railing witjh 40 mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical support spaced at 1.5 m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete. Third Floor

Providing and applying impression 24carrat Luxury paint of approved make&approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including subsurface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). Stilt/Ground Floor

Providing and applying impression 24carrat Luxury paint of approved make&approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including subsurface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). First Floor

Providing and applying impression 24carrat Luxury paint of approved make&approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including subsurface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). Second Floor

Providing and applying impression 24carrat Luxury paint of approved make&approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including subsurface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). Third Floor

Providing and applying two coats of appex Ace white exterior paint of approved meter.anufacture and of approved colour to the plastered surfaces including cleaning, prepairing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days complete Stilt/Ground Floor

Providing and applying two coats of appex Ace white exterior paint of approved meter.anufacture and of approved colour to the plastered surfaces including cleaning, prepairing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days complete First Floor

Providing and applying two coats of appex Ace white exterior paint of approved meter.anufacture and of approved colour to the plastered surfaces including cleaning, prepairing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days complete Second Floor

Providing and applying two coats of appex Ace white exterior paint of approved meter.anufacture and of approved colour to the plastered surfaces including cleaning, prepairing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days complete Third Floor

Providing and applying two coats of synthetic enamal paint of approved colour to new/ old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete Stilt/Ground Floor

Providing and applying two coats of synthetic enamal paint of approved colour to new/ old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete First Floor

Providing and applying two coats of synthetic enamal paint of approved colour to new/ old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete Second Floor

Providing and applying two coats of synthetic enamal paint of approved colour to new/ old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete Third Floor

Providing and fixing machine cut machine polished 18milimeter to 20milimeter thick telephone black/ Ameter.ba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded meter.oulding and three grooved line for the treads on bed of 1:4 cemet mortar including float filling joints with neat cemet mortar slurry curing polishing and cleaning etc. complete Stilt/Ground Floor

Providing and fixing machine cut machine polished 18milimeter to 20milimeter thick telephone black/ Ameter.ba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded meter.oulding and three grooved line for the treads on bed of 1:4 cemet mortar including float filling joints with neat cemet mortar slurry curing polishing and cleaning etc. complete First Floor

Providing and fixing machine cut machine polished 18milimeter to 20milimeter thick telephone black/ Ameter.ba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded meter.oulding and three grooved line for the treads on bed of 1:4 cemet mortar including float filling joints with neat cemet mortar slurry curing polishing and cleaning etc. complete Second Floor

Providing and fixing machine cut machine polished 18milimeter to 20milimeter thick telephone black/ Ameter.ba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded meter.oulding and three grooved line for the treads on bed of 1:4 cemet mortar including float filling joints with neat cemet mortar slurry curing polishing and cleaning etc. complete Third Floor

Providing and laying in position flooring of telephone black/ Ameter.ba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18milimeter to 20milimeter thick on bed 1:6 cemet mortar including cemet mortar floats striking joints, pointing in cemet mortar 1:3 curing and cleaning etc. complete Stilt/Ground Floor

Providing and laying in position flooring of telephone black/ Ameter.ba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18milimeter to 20milimeter thick on bed 1:6 cemet mortar including cemet mortar floats striking joints, pointing in cemet mortar 1:3 curing and cleaning etc. complete First Floor

Providing and laying in position flooring of telephone black/ Ameter.ba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18milimeter to 20milimeter thick on bed 1:6 cemet mortar including cemet mortar floats striking joints, pointing in cemet mortar 1:3 curing and cleaning etc. complete Second Floor

Providing and laying in position flooring of telephone black/ Ameter.ba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18milimeter to 20milimeter thick on bed 1:6 cemet mortar including cemet mortar floats striking joints, pointing in cemet mortar 1:3 curing and cleaning etc. complete Third Floor

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 milimetre x 450 milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 milimetre thick supports with kadappah top 35 to 40 milimetre thick and polished granite 16 to 20 milimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite etc. complete.

Providing and laying vitrified matt finish tiles for Flooring of decorative type having size 590milimeter to 605milimeter x 590milimeter to 605milimeter of 8 to 10milimeter thickness and confirming to I.S. 15622: 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cemet mortar including neat cemet mortar float, filling joints, curing and clearing etc. complete Stilt/Ground Floor

Providing and laying vitrified matt finish tiles for Flooring of decorative type having size 590milimeter to 605milimeter x 590milimeter to 605milimeter of 8 to 10milimeter thickness and confirming to I.S. 15622: 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cemet mortar including neat cemet mortar float, filling joints, curing and clearing etc. complete First Floor

Providing and laying vitrified matt finish tiles for Flooring of decorative type having size 590milimeter to 605milimeter x 590milimeter to 605milimeter of 8 to 10milimeter thickness and confirming to I.S. 15622: 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cemet mortar including neat cemet mortar float, filling joints, curing and clearing etc. complete Second Floor

Providing and laying vitrified matt finish tiles for Flooring of decorative type having size 590milimeter to 605milimeter x 590milimeter to 605milimeter of 8 to 10milimeter thickness and confirming to I.S. 15622: 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cemet mortar including neat cemet mortar float, filling joints, curing and clearing etc. complete Third Floor

Providing and laying vitrified mirror / glossy finish tiles for Skirting having size 590 milimeter to 605milimeter x 590milimeter to 605milimeter of 8 to 10milimeter thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cemet mortar including neat cemet mortar float, filling joints, curing and clearing etc. complete Stilt/Ground Floor

Providing and laying vitrified mirror / glossy finish tiles for Skirting having size 590 milimeter to 605milimeter x 590milimeter to 605milimeter of 8 to 10milimeter thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cemet mortar including neat cemet mortar float, filling joints, curing and clearing etc. complete First Floor

Providing and laying vitrified mirror / glossy finish tiles for Skirting having size 590 milimeter to 605milimeter x 590milimeter to 605milimeter of 8 to 10milimeter thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cemet mortar including neat cemet mortar float, filling joints, curing and clearing etc. complete Second Floor

Providing and laying vitrified mirror / glossy finish tiles for Skirting having size 590 milimeter to 605milimeter x 590milimeter to 605milimeter of 8 to 10milimeter thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cemet mortar including neat cemet mortar float, filling joints, curing and clearing etc. complete Third Floor

Providing and laying polished Kotah stone flooring 25milimeter to 30milimeter thick & of reqd. width in plain/ dimond pattern on a bed of 1:6 cemet mortar including cemet mortar float,filling joints with neat cemet mortar slurry,curing,polishing and cleaning complete Stilt/Ground Floor

Providing and laying polished Kotah stone flooring 25milimeter to 30milimeter thick & of reqd. width in plain/ dimond pattern on a bed of 1:6 cemet mortar including cemet mortar float,filling joints with neat cemet mortar slurry,curing,polishing and cleaning complete First Floor

Providing and laying polished Kotah stone flooring 25milimeter to 30milimeter thick & of reqd. width in plain/ dimond pattern on a bed of 1:6 cemet mortar including cemet mortar float,filling joints with neat cemet mortar slurry,curing,polishing and cleaning complete Second Floor

Providing and laying Polished Kota stone flooring with Hand-Cut Polished Kota Stones 25 milimeter to 30 milimeter thick and required width in plain/ dimond pattern on bed of 1:6 cemet mortar including cemet mortar float, filling joints with neat cemet mortarslurry, curing, cleaning and meter.irror Polishing etc. complete Note- Water absorption for Kota stone should not exceed 0.05 percent. ( Iteam to be used with prior permeter.ission of Superintending Engineer) Stilt/Ground Floor

Providing and laying Polished Kota stone flooring with Hand-Cut Polished Kota Stones 25 milimeter to 30 milimeter thick and required width in plain/ dimond pattern on bed of 1:6 cemet mortar including cemet mortar float, filling joints with neat cemet mortarslurry, curing, cleaning and meter.irror Polishing etc. complete Note- Water absorption for Kota stone should not exceed 0.05 percent. ( Iteam to be used with prior permeter.ission of Superintending Engineer) First Floor

Providing and laying Polished Kota stone flooring with Hand-Cut Polished Kota Stones 25 milimeter to 30 milimeter thick and required width in plain/ dimond pattern on bed of 1:6 cemet mortar including cemet mortar float, filling joints with neat cemet mortarslurry, curing, cleaning and meter.irror Polishing etc. complete Note- Water absorption for Kota stone should not exceed 0.05 percent. ( Iteam to be used with prior permeter.ission of Superintending Engineer) Second Floor

Providing and laying Polished Kota stone flooring with Hand-Cut Polished Kota Stones 25 milimeter to 30 milimeter thick and required width in plain/ dimond pattern on bed of 1:6 cemet mortar including cemet mortar float, filling joints with neat cemet mortarslurry, curing, cleaning and meter.irror Polishing etc. complete Note- Water absorption for Kota stone should not exceed 0.05 percent. ( Iteam to be used with prior permeter.ission of Superintending Engineer) Third Floor

Providing sills of Granite 20milimeter to 25milimeter thick, on a bed of 1:4 cemet mortar including cemet mortar float, filling joints with neat cemet mortarslurry, curing, polishing, rounding edges and cleaning complete Stilt/Ground Floor

Providing sills of Granite 20milimeter to 25milimeter thick, on a bed of 1:4 cemet mortar including cemet mortar float, filling joints with neat cemet mortarslurry, curing, polishing, rounding edges and cleaning complete. First Floor

Providing sills of Granite 20milimeter to 25milimeter thick, on a bed of 1:4 cemet mortar including cemet mortar float, filling joints with neat cemet mortarslurry, curing, polishing, rounding edges and cleaning complete. Second Floor

Providing sills of Granite 20milimeter to 25milimeter thick, on a bed of 1:4 cemet mortar including cemet mortar float, filling joints with neat cemet mortarslurry, curing, polishing, rounding edges and cleaning complete Third Floor

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 Centimeter x 30 Centimeter and conforming to I.S.15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cemet mortar including cemet mortar float, filling joint with cemet mortarslurry cleaning curing etc. complete Stilt/Ground Floor

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 Centimeter x 30 Centimeter and conforming to I.S.15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cemet mortar including cemet mortar float, filling joint with cemet mortarslurry cleaning curing etc. complete First Floor

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 Centimeter x 30 Centimeter and conforming to I.S.15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cemet mortar including cemet mortar float, filling joint with cemet mortarslurry cleaning curing etc. complete.Second Floor

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 Centimeter x 30 Centimeter and conforming to I.S.15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cemet mortar including cemet mortar float, filling joint with cemet mortarslurry cleaning curing etc. complete. Third Floor

Providing and laying Ceramic tiles of RAK/ Kajaria/ Nitco/Asian or equivalent make having size 30 Centimeter x 45 Centimeter for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cemet mortar including joint filling with white/ colour cemet mortarslurry cleaning curing etc. complete. Stilt/Ground Floor

Providing and laying Ceramic tiles of RAK/ Kajaria/ Nitco/Asian or equivalent make having size 30 Centimeter x 45 Centimeter for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cemet mortar including joint filling with white/ colour cemet mortarslurry cleaning curing etc. complete. First Floor

Providing and laying Ceramic tiles of RAK/ Kajaria/ Nitco/Asian or equivalent make having size 30 Centimeter x 45 Centimeter for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cemet mortar including joint filling with white/ colour cemet mortarslurry cleaning curing etc. complete. Second Floor

Providing and laying Ceramic tiles of RAK/ Kajaria/ Nitco/Asian or equivalent make having size 30 Centimeter x 45 Centimeter for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cemet mortar including joint filling with white/ colour cemet mortarslurry cleaning curing etc. complete. Third Floor

Providing groove to required size at specified location as directed by Engineer, at junction of Brick masonary wall and Ready mix cement concrete beam or column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete. Stilt/Ground Floor

Providing groove to required size at specified location as directed by Engineer, at junction of Brick masonary wall and Ready mix cement concrete beam or column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete. First Floor

Providing groove to required size at specified location as directed by Engineer, at junction of Brick masonary wall and Ready mix cement concrete beam or column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete. Second Floor

Providing groove to required size at specified location as directed by Engineer, at junction of Brick masonary wall and Ready mix cement concrete beam or column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete. Third Floor

Providing and fixing chickenmesh of 22 gauge, with about 30 Centimeter width at the junction of R.C.C meter.emeter.bers and brick work, of approved quality including fixingmesh in position by necessary drilling in concrete/ Brick masonary and or tying by binding wire etc. complete. Stilt/Ground Floor

Providing and fixing chickenmesh of 22 gauge, with about 30 Centimeter width at the junction of R.C.C meter.emeter.bers and brick work, of approved quality including fixingmesh in position by necessary drilling in concrete/ Brick masonary and or tying by binding wire etc. complete. First Floor

Providing and fixing chickenmesh of 22 gauge, with about 30 Centimeter width at the junction of R.C.C meter.emeter.bers and brick work, of approved quality including fixingmesh in position by necessary drilling in concrete/ Brick masonary and or tying by binding wire etc. complete. Second Floor

Providing and fixing chickenmesh of 22 gauge, with about 30 Centimeter width at the junction of R.C.C meter.emeter.bers and brick work, of approved quality including fixingmesh in position by necessary drilling in concrete/ Brick masonary and or tying by binding wire etc. complete. Third Floor

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position meter.aking riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete

Providing and fixing plain zinc sheeting of 0.80 milimeter thick (22 B.W.G.) over the ridge hip or velley to galvanised iron sheet roofing including all fastening and bolt galvanised iron screws and bolts and lead and BITUMEN washers complete ( Weight of 6.8 Kg/Sq.meter)

Providing and fixing sky light in Ready mix cement concrete roof including frame made of mild steel angle 50 x 50 x 6 milimeter with hold fast, sheet glass 12 milimeter thick , Chickenmesh 24 gauge with all acement concrete essories and required fixtures and fastening fitting including painting etc. complete

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 milimetre with lock plate of 3.15 milimetre thickness reinforced with 35 x 35 x 5 milimetre angle section fitted with sliding bolts and handles for both sides, deep Mild Steel channel section of depth and thickness not less than 65 milimetre and 3.15 milimetre respectively with hold fast arrangments, Mild Steel Bracket plate 300 x 300 x 3.15 milimetre minimum size and shape with square bar suspension shaft of minimum 32 milimetre diameter, hood cover of Mild Steel sheet not less than 0.9 milimetre thickness and of any size at top and safety devices including mechanical gear operation arrangementconsisting of worm gear whwwls and worms of high grade cast iron or mild steel and one coat of red lead primer complete. (I. S. 6248 - 1979) with mechanical gear.

Providing and fixing 20 to 25 milimetre thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimetre thick Cement mortar 1:3 with conceal, setcrete (RMW), Algaeproof or other alike water proofing liquids, raking of joints upto 35 milimetre depth,filling the joints with 6 milimetre size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete).

Providing and fixing 20 to 25 milimetre thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 milimetre between rough shahabad and Reinforced Cement concrete walls with cement grout mixed with water proofing liquid Algaeproof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 milimetre and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrtete 1:3:6 base concrete).

Providing and fixing in position Gypsum board false ceiling with 12.5 milimetre thick Gypsum boards, screwed/ fixed to the under structure of suspended galvanised iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 milimetre maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.. Stilt/Ground Floor

Providing and fixing in position Gypsum board false ceiling with 12.5 milimetre thick Gypsum boards, screwed/ fixed to the under structure of suspended galvanised iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 milimetre maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete..First Floor

Providing and fixing in position Gypsum board false ceiling with 12.5 milimetre thick Gypsum boards, screwed/ fixed to the under structure of suspended galvanised iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 milimetre maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete..Second Floor

Providing and fixing in position Gypsum board false ceiling with 12.5 milimetre thick Gypsum boards, screwed/ fixed to the under structure of suspended galvanised iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 milimetre maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete..Third Floor

Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain/ obscured glass panes 5 milimeter thick and approved type quality and iron oxidized fixtures and fastening with guard square bars 12milimeter, 10 Centimeter center to center and oil painting 2 coats etc. complete.Stilt/Ground Floor

Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain/ obscured glass panes 5 milimeter thick and approved type quality and iron oxidized fixtures and fastening with guard square bars 12milimeter, 10 Centimeter center to center and oil painting 2 coats etc. complete.First Floor

Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain/ obscured glass panes 5 milimeter thick and approved type quality and iron oxidized fixtures and fastening with guard square bars 12milimeter, 10 Centimeter center to center and oil painting 2 coats etc. complete.Second Floor

Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain/ obscured glass panes 5 milimeter thick and approved type quality and iron oxidized fixtures and fastening with guard square bars 12milimeter, 10 Centimeter center to center and oil painting 2 coats etc. complete . Third Floor

Providing and fixing on walls / ceiling / floor 15 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete.

Providing and fixing on walls /ceiling /floor 20 milimeter diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing on walls /ceiling /floor 25 milimeter diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing on walls /ceiling /floor 32 milimeter diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing on walls /ceiling /floor 40 milimeter diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing on walls /ceiling /floor 50 milimeter diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete

Providing and laying in trenches 15 milimeter diameter Chlorinated Poly Venyl Chloride pipe with necessary excavation, fittings, refilling trenches. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and laying in trenches 20 milimeter diameter Chlorinated Poly Venyl Chloride pipe with necessary excavation, fittings, refilling trenches. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and laying in trenches 25 milimeter diameter Chlorinated Poly Venyl Chloride pipe with necessary excavation, fittings, refilling trenches. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and laying in trenches 32 milimeter diameter Chlorinated Poly Venyl Chloride pipe with necessary excavation, fittings, refilling trenches. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and laying in trenches 40 milimeter diameter Chlorinated Poly Venyl Chloride pipe with necessary excavation, fittings, refilling trenches. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and laying in trenches 50 milimeter diameter Chlorinated Poly Venyl Chloride pipe with necessary excavation, fittings, refilling trenches. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing 15 milimeter diameter screw down bib/stop tap of brass including necessary socket union nut complete

Providing and fixing 20 milimeter diameter screw down bib/ stop tap of brass including necessary socket union nut complete

Providing and fixing 25 milimeter diameter screw down bib/ stop tap of brass including necessary socket union nut complete

Providing and fixing screw down 15 milimeter diameter wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing screw down for 20 milimeter diameter wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing screw down for 25 milimeter diameter wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing 15 milimeter diameter concussion push button type brass/gun meter.etal self-closing tap including necessary socket complete

Providing and fixing 25 milimeter diameter concussion push button type brass/gun meter.etal self-closing tap including necessary socket complete

Providing and fixing High Density Polymer container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of acement concrete essories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 1000 to 20000 liters.

Providing and fixing European type Colour glazed earthenware water closet pan with Unplasticised Poly Venyl Chloride seat and lid with chromium plated brass hinges and rubber buffers including Unplasticised Poly Venyl Chloride and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 milimetre diameter Unplasticised Poly Venyl Chloride flush pipe with fittings and clamps, 20 milimetre diameter Unplasticised Poly Venyl Chloride overflow pipe, mosquito proof couplings Galvanised Iron chain and pulley, with water Jet and fitting including cutting and making good to the walls and floors testing complete. ( prior approval of sample and brand by Ex. Engineer is necessary before use).

Providing and fixing 1st class white glazed earthenware 'Orisa Type' Water Closet Pan 580 milimetre diameter including 'P' or 'S' trap cast iron soil and vent pipe upto the outside face of the wall (1:5:10) cement concrfete bedding 15 milimetre thick 10 litre Poly Venyl Chloride flushing cistern with all necessary pipe connection complete.

Providing and fixing white glazed earthenware lipped flat back/ corner type Urinal with Poly venyl chloride . flushing cistern of 5 litre capacity with fittings, inlet pipes and stop tap, brackets for fixing the cistern, 32milimeterdiameter Poly venyl chloride . flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap and soil pipe connection up to the outside face of the wall.

Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with Poly venyl chloride . flushing cistern of 5 litres capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 milimeter dimeter Poly venyl chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall.

Providing and fixing white glazed earthenware Wash Hand Basin of 55 Centimeter x 40 Centimeter size including cold water piller tap/cold and hot water piller tap brackets, rubber plugs and brass chain,stop tap and necessary pipe connections including Poly venyl chloride . waste pipe and trap upto the outside face of the wall.

Providing and fixing coloured glazed earthenware Wash Hand Basin of 55 centimeter x 40 centimeter including cold water piller tap/cold and hot water piller tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including Poly Venyl Chloride waste pipe and trap up to the outside face of the wall.

Providing and fixing 10 cenTime ter PVC nahani trap with grating etc. complete

Providing, laying & fixing Poly venyl chloride . pipe of 110milimeter diameter with fittings such as bends, tees, reducers, clameter.ps etc. including necessary excavation, trench filling etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing 100 milimeter diameter stabiliser pipe/ Poly venyl chloride . soil vent/ waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clameter.ps etc. complete

Providing and laying 150 milimeter diameter salt glazed stoneware pipe including fitings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete

Providing and fixing 15 centimeter x 10 centimeter salt glazed stoneware gully trap in cemet concrete 1:4:8 out side the building including cast iron grating in the sink, connecting glazed stonewre pipe Brick masonary chamberwith cast iron lid and cast iron grating for the gully trap.

Providing and laying concrete pipe of I.S.NP. class of 300 milimeter diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cemet mortar1:1 and refilling the trench complete

Providing & constructing Brick masonary Inspection chamber60 centimeter . x 45 centimeter . x 90 centimeter . including 1:4:8 cemet concrete foundation 1:2:4 cemet concrete channels half round Glazed Stone Ware pipes, Brick masonary , plastering frometer. inside and airtight C. I. cover of 75 Kg with lid and frame fixed in cemet concrete etc. complete

Providing & constructing Brick masonary Inspection chamber90 centimeter . x 45 centimeter . x 90 centimeter . including 1:4:8 cemet concrete foundation 1:2:4 cemet concrete channels half round Glazed Stone Ware Brick masonary ,plastering from inside and C.I. lid 75 Kilogram with lid and frame fixed in cemet concrete etc. complete.

Providing & constructing Brick masonary Inspection chamber90 centimeter . x 45 centimeter . x 90 centimeter . including 1:4:8 cemet concrete foundation 1:2:4 cemet concrete channels half round Glazed Stone Ware interceptng trap with rodding pipe set in 1:4:8 cement concrete block, Brick masonary ,plastering inside and C.I. lid 75 Kilogram with frame fixed in cemet concrete etc. complete.

Providing and fixing chromiume plated towel rod 16milimeter diameter and 75 Centimeter in length including all acement concrete essories complete

Providing and fixing half turn 25 milimeter diameter gunmetal flushing cock including all acement concrete essories complete

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 milimeter thickness of having a strength of 300 kg/Sq.Centimeter of approved quality and shape on a bed of crushed sand of 25 to 30 milimeter thick including skirting joints and cleaning etc. complete

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 milimetre thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60 milimetre thick CC paver block of M-35 grade concrete with approved colour and design & pattern.

Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete of make Hindware(Matrix series 70002)/ Cera or equivalent as per the direction of Engineer-In-charge.

Providing and fixing ISI marked double swing flush door shutters conforming to IS :2202 (Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel L- hinges with necessary screws Fittings & Fixtures per leafSS kick plates on both sides of the door of 300mm heightHeavy Duty satin finish butt SS Hinges (100mm x 75mm x 3mm in size) -4 nos. SS finished lever handle with mortise lock- 1 no.Floor spring- 1 No. 100mm x 100mm safety glass at the specified locationn

Providing patti/band 150 milimeter wide on plastered surface 12milimeter to 15milimeter thick in Cement mortar 1:3 line and level including neat finishing scaffolding curing etc. Complete

Providing and applying laying Aggregate plaster in granite/ marble stones, as decorative finish to give granite/ marble like appearance to concrete, brick or block surfaces in all position including preparation of surface smoothly, evenly by racking of joints in case of Brick or block work including backing layer of 12 milimetre thick with cement mortar 1:3 with 2 percent integral cement water proofing compound, roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar into a proportion 1:4 preparing the surface for three coat of marble finish plaster giving a thin coat of white cement and two parts of course calcite powder, applying the mortar with steel float on the surface in proper evenness applying at coat of white cement and lime to set a smooth finish then applying a thin coat of slurry made of white cement and black oxide colour in required proportion by the steel float to get black streaks on the surface and curing the surface for two days including all materials and labour etc. complete.

Providing and fixing of Bituflex Close Cell Foam of size 30 milimetre x 30 milimetre in double layer in the expansion joints in Reinforced Cement Concrete framed structure (at floor level/at terrace level/interior columns) for overlapping of closed cellfoam joints, applying TP-40 PRIMER on both the sides of concrete surface, filling the 25 milimetre x 25 milimetre gap with the POLYDEE-41 on both sides of concrete surface, filling the 25 milimetre x 25 milimetre gap with the POLDEE-41 highly flexible sealent and covering the joint with Poydee- LM, 150 milimetre width in 2 coats etc complete as per the direction of Enigneer-in-charge.

Providing and Fixiing Godrej or Equivalent Make Door for Strong RoomClassII defender with Green gate with necessary fittingas per standaered etc.complete.

Providing and fixing 90 centimeter . x 60 centimeter . Granite plate engraving 10 Centimeter height letter, figures including painting the lefters/figures with approved colour and shade complete

Providing and fixing 450 milimetre x 550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod complete.

Providing and applying top coat exterior paint to terrace of approved make, shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by throughly cleaning of oil, grease, dirt and other material and fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) preparing as required, etc. complete.

Providing and fixing in position aluminium openable window of any sizes as per detailed drawing and as directed by Engineer in Charge with all necessary aluminium sections including necessary fixtures and fastening with 5 milimetre thick clear float glass etc. complete.a) Without powder coating.Stilt/Ground Floor

Providing and fixing in position aluminium openable window of any sizes as per detailed drawing and as directed by Engineer in Charge with all necessary aluminium sections including necessary fixtures and fastening with 5 milimetre thick clear float glass etc. complete.a) Without powder coating.First Floor

Providing and fixing in position aluminium openable window of any sizes as per detailed drawing and as directed by Engineer in Charge with all necessary aluminium sections including necessary fixtures and fastening with 5 milimetre thick clear float glass etc. complete.a) Without powder coating..Second Floor

Providing and fixing in position aluminium openable window of any sizes as per detailed drawing and as directed by Engineer in Charge with all necessary aluminium sections including necessary fixtures and fastening with 5 milimetre thick clear float glass etc. complete.a) Without powder coating..Third Floor

Providing and laying in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand)

Providing and laying cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Natural Sand.)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand)

Providing and laying vitrified mirror/ glossy finish tiles for Flooring of decorative type having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to Indian Standard 15622: 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-15 of trap/ granite/ quartzite/ gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed). With fine aggregate (Natural sand)

Providing and fixing mild steel grill gate with angle iron frame 65 milimetre x 65 milimetre x 10 milimetre with iron bars at 150 milimetre centre to center and diagonal flats as per the detailed drawing including hinges, pivot blocks locking arrangement welding, revetting with oil painting in three coats of approved colour shade. Weight of gate 35 kilogram per square metre.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means- Grading I, using Screening Type-A(13.2 milimetre Aggregate).

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means Grading-II (Using Screening Type-B (11.2 milimetre Aggregate).

Providing and constructing 75 milimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 milimetre stone metal layers 30 percent crusher broken metal and 70 percent Hand broken metal (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 grade at 2 kilogram per square metre, spreading 12 milimetre size chips compacting with three wheel static roller having weight 8 to 10 metric tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete including picking of existing WBM surface.

Providing and applying tack coat on the prepared surface heating by flames in boiler and spraying bitumen with sprayer on dry/hungry Black Top surface at 3.00 kilogram per 10 Square Metre using VG-30 grade bulk bitumen.

Providing and Laying Open Graded premix surfacing 20 milimetre thickness composed of 13.2 milimetre to 5.6 milimetre aggregates premixed with bituminous binder transported to site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired compaction, using VG-30 bulk bitumen, Drum Mix type hot mix plant with Superwisery Control and Data Acquisition, Paver and Vibratory roller over Modified Penetration Macadam surface.

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials & bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen at the rate 0.98 kilogram per square metre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 metric tonne etc. complete.

Supplying hard murum at the road site including conveying and stacking complete

Spreading hard murum / soft murum / gravel or kankar for side width complete

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering complete

Providing and casting in situ or precast tapering Reinforced Cement Concrete Mix-20 Barrier type Kerb with gutter (as per IRC:86-1983) embedded 125 milimetre below ground level over Mix-10 Plain Cement Concrete finished neatly with Cement Mortar 1:2, setting the same in Cement Mortar 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant.

Providing cast in situ / ready mix Mix-20 grade cement concrete for head walls of Cross Drainage work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with concrete batch mix plant (pan mixer) with Superwisery Control and Data Acquisition, with Natural Sand.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade,camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed complete.

Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts complete.

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts, complete.

Dismantling the R.Cement Concrete work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed.

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts, complete.

Removing ventilators and small windows with frame and stacking the materials with all leads lifts, complete.

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand)

Providing and fixing in position Unplasticised Poly Venyl Chloride ultra violet stabilized 110 milimetre outer diameter cowl dome confirming to Indian Standard - 4985 including making joints with solvent cement complete.

Providing and fixing 25 milimetre diameter water meter with non return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock.

Providing and fixing Poly venyl chloride . Rain water pipes of 160 milimeter outer diameter and having wall thickness of 2.2 to 2.7 milimeter confirming to I.S. 13592-1992 including proper rainwater receiving recess with Poly venyl chloride . plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25milimeter to 40milimeter from face of wall a fixing with clips of approved quality and Number filing the joint using rubber gasket with solvent cemet mortar and properly resting the shoe of pipes on C.C. or Masonry blocks, including necessary scaffolding and Maintenance for 3 yrs for any leakages or dislocations of pipes. All the Poly venyl chloride . fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete (The contractor shall give 3 yrs guarantee bond for payment)

Providing and fixing on walls/ ceiling/ floors, 25 milimeter dimeter heavy grade having embossed as ISI meter.ark galvanised iron pipes weight of 3.01 Kg/meter.eter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding andremoving existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and filling in the foundation with sand of approved quality including watering, Compacting etc. complete

Providing and fixing reinforced cemet concrete cover of size 90 centimeter . x 45 centimeter . with frame over inspection chamber etc. complete Heavy duty (225 kg)

Providing and laying in trenches 100 milimetre diameter medium grade having embossed as Indian Standard Institute mark galvanised iron pipes of 12.43 kilogram per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti-corrosive primer oil paint two coats complete.

Providing and laying in trenches 80 milimetre diameter medium grade having embossed as Indian Standard Institute Mark galvanised iron pipes of 8.57 kilogram per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti-corrosive primer oil paint two coats complete.

Providing and laying in trenches 50 milimetre diameter medium grade having embossed as Indian Standard Institute mark galvanised iron pipes of 5.17 kilogram per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti-corrosive primer oil paint two coats complete.

Providing and laying in trenches 40 milimetre diameter medium grade having embossed as Indian Standard Institute Mark galvanised iron pipes of 3.68 kilogram per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti-corrosive primer oil paint two coats complete.

Providing and Fixing matt finish stainless steel (of 302 grade ) railing with top pipe of 50 milimeter dimeter and vertical pipe of 38 milimeter dia at 0.60 meter. c/c or as required and horizontal pipes of 25 milimeter dia in three rows, all pipes of 2 milimeter thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 milimeter dia above newel post of 75 milimeter diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)

Preparing Edging or Border : Excavating the ground to required depth of 20 centimeter .In the required area,Removing & conveying unwanted stuff,rubbish to a required distance as directed.Filling the excavated part with fresh soil & manure in in 3:1 proportion to a height of 20 Centimeter mixing, leveling,watering the same .Planting rooted edging /border plants at distance of 20 Centimeter apart by watering weeding,stirring of soil replacing casualties,pruning if necessary etc.complete

Preparing Lawan: (20Centimeter Depth)Excavating the ground to required depth of 20 centimeter.Removing & conveying unwanted stuff to a require distance as directed.Filling fresh garden soil/silt & manure in excavated area in 3:1 prportion to a height of 20Centimeter mixing garden soil and manure thoroughly,well,leveling,watering on previous night.Planting required varity of lawan grass as directed and meter.aintaiing till well established by watering,weeding,clipping,rolling,etc.complete

Preparing Flower Bed: Excavating the ground to required depth of 30 centimeter . .In the required area,Removing & conveying unwanted stuff,rubbish to a required distance as directed.Filling the excavated part with fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30 Centimeter mixing garden soil and manure thoroughly,well,,leveling,watering on previous night.Planting seedings of required annuals 25 Centimeterapart meter.aintaining till well established by watering weeding,stirring of soil replacing of casualties, etc.complete

Providing and fixing CI hinged cover with frame etc. complete

Providing and laying Rough Shahabad Stone Flooring 25milimeter to 30milimeter thick and of required width in plain/ dimond pattern on a bed of 1:6 C.meter including cemet mortar float, striking joints, pointing in cemet mortar1:3 curing and cleaning etc. complete

Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chameter.fering, rounding, rebating, iron holdfast of size 300milimeter x 40milimeter x 5milimeterwith oil painting, etc. complete

Providing and fixing in position factory made box type fully glazed window consisting of cold rolled section of 105milimeterx 60milimeterx 1.25milimeter thick frame section filled with cemet concrete (1:2:4) and steel section F4B as per detailed drawing and design including meter.ild steel 12milimeter square bars at 10centimeter . center to center, required F7B section, section T6, section for shutter frame (Louvered clips in case of Louvered window portion) and 3milimeter thick glass of approved quality of necessaryfixtures and fastening, finishing with one coat of anticorrosive paint etc. complete .

Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cemet mortarsheets including scaffolding and preparing the surface by brushing and brooming down etc. complete

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete

Providing and applying two coats of water proof cemet mortarpaint of approved meter.anufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete

Drilling surface bore well 150milimeter dimeter etc. complete Spec.No: As directed by Engineer-in-charge

Providing and fixing unplastisized poly venyl chloride casing pipe 180milimeter dimeter Etc.complete Spec.No: As directed by Engineer-in-charge

Yeild testing by V noteches etc.complete Spec.No: As directed by Engineer-in-charge

Providing and fixing Poly venyl chloride Cap 180milimeter dimeter casing pipe etc.complete Spec.No: As directed by Engineer-in-charge

Providing and supplying in standard lengths Polyethelene Pipes conforming to IS4984/14151/12786/13488 with necessary jointing material like mechanical connectors, i.e. thread/insert joint/quickrelease coupler joint/compression fitting join to r flanged joint, including all taxes (Central and local), transportation and freight charges , inspection charges, loading/unloading charges, conveyance to the departmental stores/site and stacking the same inclosed shade duly protecting frometer. sunrays and rains, etc. complete

Lowering laying and jointing HDPE/meter.DPEpipes in properposition including all specials by compression fitting/Electrofusion and But fusion jointing procedure including hydraulic testing as per relevent ISCode complete with all materials for jointing procedres like Electrofusion machine ,Electric mirror/heater/But fusion welding meter.achine with hydraulic jack, toplaodingc lamp etc Pump Houseand acement concrete essories for hydraulic testing and all labours as directe by engineer in charge as perIS-7634Part II.

Providing double flanged shortbody pattern type meter.anually operated butterfly valves having body,disc and end covering radedcastironto IS-210 Gr. CF200 generally conforming in IS-13095/1991, synthetic rubber faced ring secured on disc by retaining ring with stainless steel screws tub shaft of stainless steel riding inteflonbearing excludng C.C.foundation/structuralsteelsupport..

Lowering,laying and jointing in position following C.I.D/FR eflux valves,Butterfly valves and Sluice valve including cost of all labour, jointing matt erial,including nut bolts and giving satisfactory hydraulic testing, etc. complete

Supplying and erecting submeter.ersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 milimeterdimeter borewellsuitable for 20 to 80 LPM discharge at 221 to 101 meter. head & (Max. efficiency at 163 meter. head & 50 litre per meter .) discharge &delivery pipe of necessary diameter with a necessary H type clamp

Providing & Fixing galvanised iron . sheet 1.6milimeter(16 gauge) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. and painting withone coat of red lead paint and 2 coats of enamal paint.

Supplying PVC insulated PVC round sheathed 2.5 sq.milimeter(50no. x 0.25 milimeter dimeter ) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Testing Charges for conducting BASIC TEST OF CEMENT.Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength and Soundness test.

Testing Charges for conducting BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity,Imeter.pact Value Crushing Value test.

Testing Charges for conducting BASIC TEST OF AGGREGATE. Sieve Analysis test.

Testing Charges for conducting BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index test.

Testing Charges for conducting FINE AGGREGATES. Fineness meter.odulus (Sieve Analysis),Silt & Clay Content test.

Testing Charges for conducting BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength ( Set of 5 Bricks), Efflorescence (Set of 5 Bricks) test.

Testing Charges for Natural stone.Determination of Water Absorption, Specific Gravity test.

Testing Charges for conducting Ceramic TILES / VITRIFIED TILES Water Absorption,moduls of Rapture (Set of 6 Tiles) test.

Testing Charges for conducting CONCRETE Compressive Strength OF cemet concrete Cube (Set of 3 cubes) test.

Testing Charges for conducting Concrete mix Design (With all Tests on basic materials ).

Testing Charges for conducting CONCRETE PAVING BLOCKS Compressive Strength,Water Absorption test (Set of 8 Blocks).

Testing Charges for conducting meter.ORTAR Compressive Strength( Set of 3 Cubes) test.

Testing Charges for conducting STONE/ RUBBLE Crushing Value/Compressive Strength,Water Absorption & Specific Gravity test.

Testing Charges for conducting SOIL / murum Sieve Analysis test.

Testing Charges for conducting SOIL / murum Liquid limeter.it & plastic Limeter.it test.

Testing Charges for conducting SOIL / murum compaction Test (Proctor Density).

Testing Charges for conducting SOIL / murum C.B.R. Test (Lab) Excluding compaction test.

Testing Charges for conducting SOIL / murum Field Density test by Sand Replacemet mortarmeter.ethod.

Testing Charges for conducting BITUMEN Penetration, Softening Point, Flash & Fire Point and Specific Gravity test.

Testing Charges for conducting BITUMEN Viscosity test.

Testing Charges for conducting BITUMEN Extraction Test.

Testing Charges for conducting WOOD Density, moisture Content test.

Testing Charges for conducting FLUSH DOOR Knife Test, Adhesion Test, End I milimeter ersion Test.

Testing Charges for conducting aluminiume SECTION Test for Thickness, meter.ass Per Running meter

Testing Charges for conducting aluminiume SECTION Test on Powder Coating.

Testing Charges for conducting Poly venyl chloride . PIPES (NONPLASTISIZED) Test for Weight per running meter.eter,diameter of pipe & wall thickness of pipe.

Testing Charges for conducting STEEL BAR TESTING Upto 16 milimeter (Set of 3 Bars)

Testing Charges for conducting STEEL BAR TESTING Above 16 milimeter(Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per meter.eter, Bend / Rebend Test, Proof Stress).

Testing Charges for conducting PAINT / THERmeter.O-PLASTIC PAINT Reflectance & yellowness index Test.

Testing Charges for conducting PAINT / THERmeter.O-PLASTIC PAINT Flowability (Percentage residue) Test.

Testing Charges for conducting PAINT / THERmeter.O-PLASTIC PAINT Softening Point (Ring & ball meter.ethod) Test.

Testing Charges for conducting PAINT / THERmeter.O-PLASTIC PAINT Drying Time Test.

Additional Royalty Charges for Natural Sand.

Additional Royalty Charges for Hard murum /Earth/Rubble etc.

Sub Work no. 1 Est no.132007 A/2021-21 :Providing EI in the for the New Court Building at Malshiras Dist Solapur

Supplying and erecting HMS P.V.C. conduit 25 MM. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit 25 MM dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS P.V.C. conduit 32 MM. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit 32 MM dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting green colour earthing with 1x 1.5 sq.MM F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG- MA/BW

Supplying and erecting green colour earthing with 1x 2.5 sq.MM F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting Mains with 2x2.5 sq.MM F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting Mains with 4x 4 sq.MM F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting Mains with 2x4 sq.MM F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW( 525 ac Mains +4050 Mtr suppy Mains)

Supplying and erecting ISI Mark Modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections coMplete.

Supplying and erecting ISI Mark Modular type (two Module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections coMplete. Note: Add Rs 57/- for additional two Module box with double Mounting plate if required

Supplying and erecting unbreakable concealed type Modular switch box with double Mounting plate for 2 Module duly erected flush to wall with required chiselling and finishing with ceMent Mortar / POP as per required to Match the bacKground.( for AC)

Supplying and erecting unbreakable concealed type Modular switch box with double Mounting plate for 3 Module duly erected flush to wall with required chiselling and finishing with ceMent Mortar / POP as per required to Match the bacKground.

Supplying and erecting unbreakable concealed type Modular switch box with double Mounting plate for 6 Module duly erected flush to wall with required chiselling and finishing with ceMent Mortar / POP as per required to Match the bacKground.( 7 water cooler +18 lift 3 nos)

Supplying and erecting unbreakable concealed type Modular switch box with double Mounting plate for 12 Module duly erected flush to wall with required chiselling and finishing with ceMent Mortar / POP as per required to Match the bacKground.

Pt wiring for light/fan/bell concealed type in Min 20 MM ISI Marked HMS PVC conduit with 1.5 sq.MM. (2+1E) FR grade copper wires, Modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with Modular accessories as per specification No: WG-PW/CW

Pt wiring for light/fan/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in Min 20 MM PVC conduit / casing n capping with 1.5 sq.MM. (2+1E) FR grade copper wires, Modular type switch, earthing and required accessories as per specification No: WG- PW/HW

Supplying and erecting square shaped CRCA /die-cast aluMiniuM powder coated housing LED panel light (sliM edge-lit) suitable for 9 W - 12 W with provision for plane front fraMe with translucent cover fixed to the housing coMplete.( 101+95)

Supplying and erecting square / round shaped CRCA /die-cast aluMiniuM powder coated housing LED panel ( sliM edge-lit) light suitable for 13W to18W with provision for plane front fraMe with translucent cover fixed to the housing coMplete.

Supplying and erecting CRCA /die-cast aluMiniuM powder coated housing LED panel light (sliM edge-lit) square / round shape suitable for 19 to 24 W with provision for plane front fraMe with translucent cover fixed to the housing coMplete.

Supplying and erecting square shaped CRCA /die-cast aluMiniuM powder coated housing LED panel light (sliM edge-lit) 600x600MM suitable for 36 W-40W with provision for plane front fraMe with translucent cover fixed to the housing coMplete.

Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no. FG-IDF/BHF)(6 per lift x 3 nos )

Supplying and erecting ding dong / electronic Musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunMica block of suitable size

Supplying and erecting 10-12W, 230V integral type LED LaMp suitable for B-22/E-27 base.

Supplying and erecting fresh air Cum exhaust fan of light duty250 V A.C. 50 cycles 225MM. 1400 RPM rust proof body & blades, wire Mesh, duly erected in an approved Manner.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 MM coMplete erected in position as per specification no. FG-FN/CF

Supplying and fixing anchor type fastener fan hook, with 2 nos. of 10 MM dia x 75 MM long with necessary Materials for ceiling fan.

Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan coMplete erected with PVC three core flexible cable 1 sq. MM copper PVC wire.

Supplying, installing, testing and coMMissioning of split type variable speed inverter technology rooM Air conditioning unit 2 TR capacity having ISEER MiniMuM 4.50 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor Mounting type coMplete with Refrigerants R410 A /R32 and copper condenser at position. specification no. APAC/ SAC

Supplying and erecting soft drawn copper pipe suitable for refrigeration systeM having 22 SWG thickness and inner dia / size 16 MM coMplete.

Supplying and erecting soft drawn copper pipe suitable for refrigeration systeM having 22 SWG thickness and inner dia / size 22 MM coMplete.

Supplying, erecting, testing and coMMissioning of self- contained water cooler 230/250 V 50 cycles noMinal cooling capacity of 80 liters/hr and storage capacity 120 liters with partially stainless steel body coMplete. specification no. AP-WCR/WC

Supplying and erecting ultra voilet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV gerMicidal tube of 8W capacity choke Made of copper wire and two indicator laMps, storage capacity of purified water 7 to 8 litre with activated carbon filter and softener operating on 230V single phase AC supply.

Supplying and erecting 16/20 MM (ID/OD) polyethylene coMposite pipe duly joined by coMpression/criMp fitted accessories, with internal as well as external end sealing arrangeMent for solar water heater systeM coMplete. Specification no. (ESD- HWP/PCP)

Supplying and erecting 20/25 MM (ID/OD) polyethylene coMposite pipe duly joined by coMpression/criMp fitted accessories, with internal as well as external end sealing arrangeMent for solar water heater systeM coMplete. Specification no. (ESD- HWP/PCP)

Supplying, erecting and Marking SPMCB 0.5A to 5A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and Marking SPMCB 6A to 32A, C-series (for Motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and Marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW- SWR/MCB

Supplying, erecting and Marking DPMCB 6A to 32A, C- series (for Motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and Marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and Marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush Mounted SPMCB of 12 ways, on iron /GI fraMe (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush Mounted with 2 ways for incoMing and 10 ways for outgoing SP MCB’s on iron/ GI fraMe as per specification no. SW-SWR/MCBDB

Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush Mounted suitable for 3 pole MCCB as incoMer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) , on iron/ GI fraMe. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing and erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable therMal (overload) setting and fixed Magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarM contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI fraMe as per specification no. SW-SWR/MCCB

Providing and erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable therMal (overload) setting and fixed Magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarM contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI fraMe as per specification no. SW-SWR/MCCB

Providing and erecting 4 Pole MCCB of 250A,415V capacity with short circuit rating 36 kA (Ics=100% of Icu) adjustable therMal (overload) setting and fixed Magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarM contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI fraMe as per specification no. SW-SWR/MCCB

Providing and erecting 4 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable therMal (overload) setting and fixed Magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarM contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI fraMe as per specification no. SW-SWR/MCCB

Supplying and fixing CRCA sheet Box with earthing terMinals for housing 2 Pole RCCB on iron fraMe/laMinated board coMplete.

Supplying and fixing CRCA sheet Box with earthing terMinals for housing 4 Pole RCCB on iron fraMe/laMinated board coMplete.

Supplying, fixing and coMMissioning of 2 pole,RCBO (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 MA sensitivity and having capacity of 6/10/16/20/25A, as per specification no SW- RCCB/RCBO

Supplying, fixing and coMMissioning of 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 MA sensitivity and having capacity of 6A/10A/16A/20A/25/A as per specification no SW- RCCB/RCBO

Providing and erecting floor / wall Mounting, MCCB panel board with door suitable for four pole incoMing 250A, 6 ways four pole outgoing upto 100 A MCCB's on iron fraMe, as per specification no SW-SWR/MCCBPB. (Excluding MCCB'S)

Providing and erecting incoMing and outgoing cable alleys suitable for MCCB panel board with door of 250A incoMing and 6 way outgoing or 400A incoMing and 4 way outgoing Made froM CRCA sheet 1.6 MM thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB coMplete.

Supplying and erecting porcelain/epoxy bus bar support coMplete erected in provided MS box for 100A coMplete.

Supplying and erecting porcelain/epoxy bus bar support coMplete erected in provided MS box for 200/300A coMplete.

Supplying and erecting porcelain/epoxy bus bar support coMplete erected in provided MS box for 400A coMplete.

Supplying and erecting Metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatMent and duly powder coated or painted with one coat of red lead paint and 2 coats of enaMel paint coMplete.

Supplying and erecting iron, sheet Metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding coMplete erected at the position with necessary Materials duly painted with one coat of red oxide and two coats of enaMel paint to Match the switchgears or as per directions by the authority. 10 lg per AC outdoor unit =25 x10 Kg =250 Kg +( 1.89 x2 =3.78 M,0.5 x2=1 M,0.15 x4=0.6 M total 5.38 Mtr for 50x505x5 MM --3.8 Kg/M total 20.44 Kg for panel stand)

Supplying and erecting of any size electrolyte aluMiniuM patti or bar in bus bar chaMber / in panel or any other purpose, 500 V with require capacity with 99.9% aluMiniuM purity with fixing arrangeMent (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve coMplete as per specification no. BCP- ( for 400 A 50 x5 MM --0.673 Kg/Mtr total (1.75 x4 +1*4=11 Mtr x 0.673=7.40 Kg,for 250 A 30 x MM --0.40 Kg/Mtr total (2 x4 =8 Mtr x 00.40=3.20 Kg,for 100 A 15 x3 MM --0.120Kg/Mtr total (4 x4 =16 Mtr x 0.120=1.92 Kg)

Supplying and erecting Intelligent flush Mounted panel Meter three phase four wire (IPM) input voltage MeasureMent range 50- 550 V AC (P-P) 415V, aux. supply 90-300 V AC/DC, flush Mounting 96 x 96 MM, flush Mounted (96 x 96 MM) Meter constant Wh viewing in LCD Multifunction Meters in auto scroll Mode with voltage, current, frequency, power factor kW, kVA, kVAR, kWh, kVAh, kVARh, phase angle, interrupts, THD, coMplete with RS 485 coMMunication protocol, class 1 accuracy and wiring connections and Mounting hardware on provided panels coMplete with calibration certificate froM Manufacturer.

Supplying and erecting LED type indicating pilot laMp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary Material, wiring & connections etc.

Supplying and erecting LED type indicating pilot laMp with LED colour blue, 230 / 250 V on provided box / panel with necessary Material, wiring & connections etc.

Supplying, erecting & terMinating XLPE arMoured cable 3½ core 70 sq. MM. aluMiniuM conductor with continuous 8.35 sq. MM. (10 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terMinating XLPE arMoured cable 3½ core 150 sq. MM. aluMiniuM conductor with continuous 12.97 sq. MM. (8 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terMinating XLPE arMoured cable 1100 V 3½ core 185 sq. MM. aluMiniuM conductor with continuous 12.97 sq. MM. (8 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terMinating XLPE arMoured cable 4 core 6 sq. MM. aluMiniuM conductor with continuous 5.48 sq. MM. (12 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terMinating XLPE arMoured cable 4 core 10 sq. MM. aluMiniuM conductor with continuous 5.48 sq. MM. (12 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terMinating XLPE arMoured cable 4 core 25 sq. MM. aluMiniuM conductor with continuous 5.48 sq. MM. (12 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cM coMplete with all Materials, testing & recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 30 x 30 x 0.315 cM coMplete with all Materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI claMps fixed on wall painted with bituMinous paint in an approved Manner with joints required. As per specification no EA-EP.( 14.58 Mtr 25 x3 MM-0.59 Kg/Mtr total 8.60 Kg)

Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper claMps fixed on wall/cable/conduit with screws in an approved Manner.) (8 swg --wire --0.670 Kg/M total for one lift 20.6 M single run double run 41.2 Mtr =41.2 Mtr x 3 lift=123.6 Mr)

Supplying and erecting on line UPS pure sine wave of 10 kVA capacity coMplete with standard features, along with necessary SMF batteries for 30 Mins battery backup, as per specification no. AP-UPS

Supplying and erecting ISI Mark Modular type switch 16A duly erected on provided plate and box with wiring connections coMplete.(46 PPS+7 water cooler)

Supplying and erecting ISI Mark Modular type 3 pin 6 / 16A Multi socket with safety shutter, duly erected on provided plate and box with wiring connections coMplete.(46 PPS+25AC+7 water cooler)

Supplying and erecting ISI Mark Modular type switch 6A / 10A duly erected on provided plate and box with wiring connections coMplete.( 804 4S4P+7 water cooler+36 lift)

Supplying and erecting ISI Mark Modular type 3 pin 6A Multi sockets with safety shutter, duly erected on provided plate and box with wiring connections coMplete.( 804 4S4P+7 water cooler+36 lift)

131041B. of 2021-2022 Providing 320 KVA DG set with AMF Panel for New Dist. Court Malshiras Dist,Solapur

Providing and erecting 4 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable therMal (overload) setting and fixed Magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarM contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI fraMe as per specification no. SW-SWR/MCCB

Supplying and erecting Metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatMent and duly powder coated or painted with one coat of red lead paint and 2 coats of enaMel paint coMplete.( 0.8 x 0.5 x0.3 M x 1 nos)

Supplying, erecting & terMinating XLPE arMoured cable 1100 V 3½ core 185 sq. MM. aluMiniuM conductor with continuous 12.97 sq. MM. (8 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL( double run)

Supplying and erecting G.I. pipe ‘A’ class 75 MM dia. erected for enclosing XLPE arMoured cable on wall/pole as per specification no. CB-CE

Supplying and laying (including excavation of suitable width & depth up to 90 cM) 75 MM outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth coMplete.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cM coMplete with all Materials, testing & recording the results as per specification no. EA-EP( DG neutral --2 nos DG body--2 nos AMF panel-2 nos)

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI claMps fixed on wall painted with bituMinous paint in an approved Manner with joints required. As per specification no EA-EP.(15 M 25 x 3 MM)

Supplying, erecting, testing and coMMissioning of diesel generating set with alternator of 320 kVA output continuous rating, 3 phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled Multi-cylinder diesel engine developing suitable BHP at 1500 rpM with 10% overload for 1 hour in 12 hours, alongwith standard accessories, self-excited, self-regulated, screen protected alternator with static excitation systeM running at 1500 RPM as per IS 4722- 2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a coMMon fabricated steel base fraMe and Mounted on anti-vibrating pads with Provided AMF control panel coMprising Meters, switchgears, indicators connected with suitable wires/cables, the coMplete set enclosed in coMposite Acoustic enclosure as fully asseMbled integral unit Made of 16 SWG CRCA Sheet, sound absorbing Material to restrict sound level upto 75 dB at 1.0 M, provided with first filling of oil, diesel etc. and obtaining necessary approval froM Electrical Inspector as per specification no. GEN- DG

Supplying, erecting, testing and coMMissioning of Microprocessor based AMF panel suitable for diesel generating set of above 250 kVA upto 320 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

Excavating hard Rock or bituMinous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by reMoving debris & Making the site as required coMplete..( 6 x 2.3 x 0.5M)

Making ceMent concrete foundation in 1:3:6 ceMent concrete, (20 to 25) MM. stone Metal duly plastered with necessary curing for coMplete. (pole Muffing or any other purpose).(5.9 x 2.2x 1M)

131041C of 2021-2022 Providing 04 Passenger Lift G+3 (2 nos) and 16 Passenger Lift G+3( 1 no.) in the Additional Dist. Court,Malshiras Dist Solapur

SITC of Electric Traction Passenger Lift with • Rated capacity :- 4 Passenger/272Kg • Floors :- G+3 floor (4Stops/4 Landings) • Travel :- 9 to 12.6Mtrs • Location of Lift Machine:- MR/MRL • Rated speed :- 1.0Mps VS • Doors type :- COPO/TOPO Doors with fraMe having clear opening of 700/800 MM wide x 2000 MM high Made froM SS 304 grade sheet of 1.5MM, thick in hairline finish for car and all landing doors with SS door architraves/fraMes • Lift car enclosure Made froM SS 304 grade sheet of 1.5MM, thick with hairline finish with fraMe Made froM MS girders, bracing of adequate size with MiniMuM safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, Mirror, eMergency light etc. • COP with SS face plate having Metallic push buttons with Braille Code & luMinous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarM, VAS in Marathi, Hindi & English with intercoM systeM with telephone instruMent in Lift car, LMR & FCC/ground floor • Clear Car size of 1100MM wide x 700MM deep x 2130.MM high • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having Metallic push buttons with Braille Code & luMinous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on Microprocessor/ PLC with VVVF Drive having closed loop control systeM, with IBMS coMpatible having necessary port, control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5MM CRCA sheet with powder coating with IP54 Protection class • ARD coMplete with necessary SMF VRLA batteries • FireMan controller having fireMan switch at fire Landing. • CCTV surveillance systeM coMprises of 2nos MiniMuM 2.0MP FHD IP based vandal proof DoMe caMera in lift car & in LMR/inside lift shaft top aiMed on Lift Machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18” FHD TV Monitor, to be kept in FCC/LMR as directed by Engineer In Charge. • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electroMagnetic brakes, entire asseMbly Mounted on adequate size girders duly fixed on LMR floor/ shaft walls coMplete with Main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength • Other Mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight fraMe with necessary blocks, buffers with necessary support arrangeMent, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door fraMes and accessories, erection buffers, erection of lift Machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for Mounting lift Machine etc. coMplete as per specification no. LFT. • Lift shaft available having clear size of 2400MM wide x1500.MM deep,1500MM Pit depth, 4500MM Overhead. Note:1) General: - Job includes entire procedure of obtaining all necessary erection perMissions & "License to Work the Lift" froM Electrical Inspector(Lifts) with subMission to the Engineer In Charge. 2) Warrantee: - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the Maintenance schedule. Total as per Add on Note 1) For Additional 2 floors Rs 155611 x2 = Rs 311222.00 2) for Full collective control systeM Rs 31974.00 Total As per Add On Note Rs 343196.00 Basic rate of lift Rs 1146931.00 + add rate Rs 343196.00 for taluka place add 5 % in total Rate Rs 1564633.35)

SITC of Electric Traction Passenger Lift with • Rated capacity :- 16 Passenger/1088Kg • Floors :- G+3 floor (4Stops/4 Landings) • Travel :- 9 to 12.6 Mtrs • Location of Lift Machine:- MR/MRL • Rated speed :- 1.0Mps VS • Doors type :- COPO/TOPO Doors with fraMe having clear opening of 1000MM wide x 2000 MM high Made froM SS 304 grade sheet of 1.5MM, thick in hairline finish for car and all landing doors with SS door architraves/fraMes • Lift car enclosure Made froM SS 304 grade sheet of 1.5MM, thick with hairline finish with fraMe Made froM MS girders, bracing of adequate size with MiniMuM safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, Mirror, eMergency light etc. • COP with SS face plate having Metallic push buttons with Braille Code & luMinous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarM, VAS in Marathi, Hindi & English with intercoM systeM with telephone instruMent in Lift car, LMR & FCC/ground floor • Clear Car size of 2000MM wide x 1300MM deep x 2130.MM high • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having Metallic push buttons with Braille Code & luMinous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on Microprocessor/ PLC with VVVF Drive having closed loop control systeM, with IBMS coMpatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5MM CRCA sheet with powder coating with IP54 Protection class • ARD coMplete with necessary SMF VRLA batteries • FireMan controller having fireMan switch at fire Landing, • CCTV surveillance systeM coMprises of 2nos MiniMuM 2.0MP FHD IP based vandal proof DoMe caMera in lift car & in LMR/inside lift shaft top aiMed on Lift Machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV Monitor, to be kept in FCC/LMR as directed by Engineer In Charge. • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electroMagnetic brakes, entire asseMbly Mounted on adequate size girders duly fixed on LMR floor/ shaft walls coMplete with Main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength • Other Mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight fraMe with necessary blocks, buffers with necessary support arrangeMent, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door fraMes and accessories, erection buffers, erection of lift Machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for Mounting lift Machine etc. coMplete as per specification no. LFT.. • Lift shaft available having clear size of 2500MM wide x 3600.MM deep, 1500.MM Pit depth, 4500MM Overhead. Note:1) General: - Job includes entire procedure of obtaining all necessary erection perMissions & "License to Work the Lift" froM Electrical Inspector(Lifts) with subMission to the Engineer In Charge 2) Warrantee: - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the Maintenance schedule. Total as per Add on Note 1) For Additional 2 floors Rs 170885 x2 = Rs 341770.00 2) for Full collective control systeM Rs 31974.00 Total As per Add On Note Rs 373744.00 Basic rate of lift Rs 1948376.00 + add rate Rs 373744.00 for taluka place add 5 % in total Rate Rs 2438226)

131041D of 2021-2022 Providing SubMersible PuMps (2 nos) for openwell and SubMersible PuMp for New Dist Court,Malshiras Dist Solapur

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.MM (50 no. x 0.25 MM dia.) 3 core flexible Multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting four pole Metal clad ON LOAD change over switch 415V, 40A erected on angle iron / GI fraMe coMplete.

Supplying, erecting and Marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and Marking FPMCB 6A to 32A in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting CRCA sheet Metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI fraMe coMplete.

Supplying and erecting Marine plywood 18/19 MM thick fixed to wall or on provided panel board with necessary Materials such as screws, wall fasteners, supports, nut bolts etc. coMplete.

Supplying and erecting iron, sheet Metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding coMplete erected at the position with necessary Materials duly painted with one coat of red oxide and two coats of enaMel paint to Match the switchgears or as per directions by the authority.(40x40x4 MM--2.4Kg/M---4.6M)

Supplying and erecting bus bar chaMber triple pole with neutral with four aluMiniuM bars, 500V, 100A coMplete as per specification no. CP-BB

Supplying and erecting 525 V 3 phase, 50 Hz., MPP type capacitor having MiniMuM overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and MiniMuM life 150000 hours kVAr bank of Metalised polypropylene condensers (MPP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terMinals and built on angle iron or channel iron fraMe work and provided with terMinal cover box coMplete erected on provided iron bracket or on floor duly tested by licensee.

Supplying, erecting & terMinating XLPE arMoured cable 3 core 6 sq. MM. aluMiniuM conductor with continuous 5.48 sq. MM. (12 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terMinating XLPE arMoured cable 4 core 6 sq. MM. aluMiniuM conductor with continuous 5.48 sq. MM. (12 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting G.I. pipe ‘A’ class 40 MM dia. erected for enclosing XLPE arMoured cable on wall/pole as per specification no. CB-CE

Supplying and laying (including excavation of suitable width & depth up to 90 cM) 50 MM outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth coMplete.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cM coMplete with all Materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting subMersible puMpset of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 150 MM dia. borewell suitable for 70 to 250 LPM discharge at 44 to 24 M head & (Max. efficiency at 38 M head & 160 lpM) discharge & delivery Pipe of Size-50MM diaMeter with a necessary H type claMps as per specification no. WP-SMP

Supplying and erecting Centrifugal water puMp (Monoblock), 415 V, three phase 50 cycles A.C. supply of 7.5 KW/10 HP with discharge 9.6/21.6 Litres per second (LPS) for head of 18/40 M and 80 MM suction/ 65 MM delivery pipe of size or with discharge of 4.3/7.8 Litres per second (LPS) for head of 40/64 M and 65MM suction/ 50MM delivery pipe of size, on provided C.C. foundation as per specification no. WP-CGP

Supplying and erecting flat flexible 3 core 4 sq MM PVC sheathed subMersible type copper cable suitably claMped at fixed intervals with coluMn pipe asseMbly coMplete.

Supplying and erecting autoMatic control panel for 3 Ph, 415 volt, A.c. SubMersible/centrifugal puMp set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., CoMbined aMMeter/voltMeter, phase indicating laMp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase iMbalance etc

Supplying and erecting ISI Mark GI pipe 65 MM. dia. ‘B’ class at position with accessories coMplete. Specification no. CW-PLB/GP.

Supplying and erecting high density polythene pipe ISI Mark 40 MM dia. suitable for pressure of 6 Kg/cM2 connected to jet/subMersible puMp with required Material coMplete.

Supplying and erecting 65 MM dia. gun Metal sluice valve at position with necessary Materials coMplete.

Supplying and erecting non return valve 65 MM dia in position Made of gun Metal coMplete.

Supplying and erecting CI flange 50 MM.dia with necessary nuts bolts and washers with rubber seal in position coMplete.

Supplying and erecting autoMatic control panel for 3 Ph, 415 volt, a.c. SubMersible/centrifugal puMp set for 7.5 to 10 HP consisting of DOL starter having relay range 13-21 AMP,S.P.P., CoMbined aMMeter/voltMeter, phase indicating laMp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase iMbalance etc

Supplying and erecting ISI Mark GI pipe 75/80 MM dia. ‘B’ class at position with accessories coMplete. Specification no. CW-PLB/GP.

Supplying and erecting cast iron foot valve ball type/flap type of size 80 MM dia with strainer for negative suction coMplete as per specification no. FF-VL/FV

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI claMps fixed on wall painted with bituMinous paint in an approved Manner with joints required. As per specification no EA-EP.( 25 x 3 MM--0.59 Kg/Mt total 7.29 Mtr )

131041E. of 2021-2022 Providing 315 KVA ,11/0.433 KV TransforMer with 11 kV Underground Supply Cable and allied work for New Dist Court Malshiras,Dist Solapur

Providing and erecting 4 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable therMal (overload) setting and fixed Magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarM contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI fraMe as per specification no. SW-SWR/MCCB

Supplying and erecting Metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatMent and duly powder coated or painted with one coat of red lead paint and 2 coats of enaMel paint coMplete.( 0.8 x 0.6 x 0.3 M)

Supplying, erecting, testing and coMMissioning of 11 KV HT Metering cubical (coMpact type) approved by MSEDCL/licensee fabricated with 2 MM (14 SWG) M.S. sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25 x 6 MM electronic security lock and heavy duty Mechanical lock, with counter Meter for Measuring no of tiMes the opening of doors, top side cover ( CT, PT cover) interlock with Meter doors, epoxy coated 3 nos CT having required ratio between 5/5A to 50/5A, VA10,Class0.5S, 11000/V3/110/V3 VA 50, class 0.5 epoxy terMinal block suitable for provided trivector Meter, and provision for incoMing and outgoing cables etc. coMplete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation

Supplying, erecting & terMinating XLPE arMoured cable 1 core 120 sq. MM. aluMiniuM conductor with continuous 12.97 sq. MM. (8 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL( per phase =10 Mtr x 3 phase =30 Mtr froM DTC bushing to DB box)

Supplying, erecting & terMinating XLPE arMoured cable 1100 V 3½ core 185 sq. MM. aluMiniuM conductor with continuous 12.97 sq. MM. (8 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( double run)

Supplying, erecting & terMinating 3 x 95 sq. MM. aluMiniuM 11 kV(E), XLPE arMoured cable on wall/ceiling or laid in provided trench / pipe in an approved Manner as per specification no. CB- HT ( double run)

Providing and erecting Heat shrinkable indoor terMination kit for 11 kV ( E ) XLPE HT cable 3x up to 95 sq. MM. with necessary Material as per specification no. CB-JT/HT

Providing and erecting Heat shrinkable out door terMination kit for 11 kV ( E ) XLPE HT cable 3 x up to 95 sq. MM. with necessary Material as per specification No. CB-JT/HT

Supplying and erecting G.I. pipe ‘A’ class 75 MM dia. erected for enclosing XLPE arMoured cable on wall/pole as per specification no. CB-CE

Supplying and laying (including excavation) 15 cM dia half round RCC HuMe pipe of standard thickness at required depth up to 90 cMs. below road / ground surface, for enclosing provided cable & necessary back filling with light raMMing to Make the road/ground surface as it was (Except bituMen carpet).

Supplying and laying (including excavation of suitable width & depth up to 90 cM) 75 MM outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth coMplete.

Supplying and erecting rolled steel joist (girder) pole 100 x 116 MM (23 Kg/M) with provided base plate in provided foundation as per specification no. OH-PL/RSJ( 9M x 2 nos)

Supplying and erecting 100 x 50x6 MM with 4.7 MM thick web and 7.5 MM thick flange channel iron cross arM of suitable length for 2.4M wide DP structure and erecting on DP with 50x6 MM claMp as per approved Method of construction and coMplete as per specification no. OH-PL/BKT.

Supplying and erecting ACSR conductor of size 6/1-3.60 MM coMplete. (Ferret) (171.3 Kg/kM) as per specification no. OH-CON/ACSR

Supplying and erecting porcelain disc type insulator with necessary hardware suitable for 11kV line, coMplete as per specification no. OH-INS/DI

Supplying and erecting porcelain pin type insulator with G.I. pin suitable for 11kV line, coMplete as per specification no. OH-INS/PN

Supplying and erecting porcelain post type insulator with nut bolts suitable for 11kV line, coMplete as per specification no. OH-INS/PST

Supplying and erecting distribution class, 11 kV thyrite type lightning arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA

Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height coMplete with anchor plate 300 x 300 x 6 MM., straining screws, G.I. stay wire 7/8 SWG, G.l. stay rod 20 MM x 1.8 M length and pole claMps duly erected in provided ceMent concrete foundation.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cM coMplete with all Materials, testing & recording the results as per specification no. EA-EP( LA 1 no AB 1 no. DO 1 no TF 2 no TF N 2 nos , Kiosk-6 nos)

Providing pipe type earthing with 40MM. dia. G.l. pipe or 20 MM dia. G.l. Rod coMplete with all Materials as per specification no. EA- EP( 2 nos of pole --2 nos )

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI claMps fixed on wall painted with bituMinous paint in an approved Manner with joints required. As per specification no EA-EP. (total for LA 15 M for DO 13 M for AB 11 M for TF B 10 M and TF N 11 M and kiosk 6 nos 15 Mtr total 75 Mt 25 x 3 M 0.590 Kg /M)

Supplying, installing, testing and coMMissioning of 3 phase, 11/0.433 kV, 50 Hz., 315 kVA, oil iMMersed and naturally cooled outdoor type, copper wound transforMer, delta/star connected with additional neutral brought out on load side, teMperature rise should not exceed 40oC by therMoMeter in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories coMplete with test certificate with losses below 1025 Watts at 50% load, 3100 Watts at 100% load as per IS:1180 - 2014 energy efficiency level II with necessary perMissions of Electrical Inspector, as per specification no SS- TR.

Supplying and erecting approved Make 11 kV outdoor type gang operated air break, triple pole switch 400 A capacity with 3 post pin type insulator per phase, Mounted in horizontal or vertical position with necessary channels on provided cross arM with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height froM ground level with necessary claMp.

Supplying and erecting approved Make, 11 kV outdoor type drop out fuse with insulator coMplete with fuse holders, fuse barrel with Metal fitting, fuse eleMent Mounted on M.S. channel with working current of 15A capacity coMplete erected on provided cross arM.

Supplying and erecting fencing of section having size 2450 MM in height froM ground level and 1200 MM width with angle iron fraMe work erected in CC foundation and painted coMplete as per specification no SS-AS/FSG

Supplying and erecting fencing of section having size 2450 MM in height froM ground level and 600 MM width with angle iron fraMe work erected in CC foundation and painted coMplete as per specification no SS-AS/FSG

Supplying and erecting fencing of section having size 2450 MM in height froM ground level and 700 MM width with angle iron fraMe work erected in CC foundation and painted coMplete as per specification no SS-AS/FSG

Supplying and erecting 50 x 50 x 6 MM angle iron as corner support 2M long fixed at the Middle of the fencing fraMe and the other side inclined at 30 degree angle, in ceMent concrete foundation of 15 x 15 x 40 cM coMplete duly painted with one coat of red oxide and two coats aluMinuM paint coMplete.

Supplying and erecting double leaf hinged door Each 1500 MM in width x 1850 MM in height using B class, GI pipe with angle iron supports, chain link wire Mesh (jali) coMplete supported on channel iron, erected in foundation, and painted coMplete as per specification no SS-AS/DLD

Excavating hard MuruM / Metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by reMoving debris & Making the site as required coMplete.(2 x1.5 x0.5)

Supplying and spreading stone Metal 25 MM size for 100 MM depth above the ground level coMplete.(49.5-3-2.25=44.25sqMM)

Making transforMer plinth (1.5 x 1.5 x 1.5) M in size with necessary excavation in ground with 150 MM. thick M- 10 PCC at the bottoM and top and 250 MM. thick, burnt brick wall constructed at periphery and reMaining hollow portion shall be filled with 40MM hard broken aggregate. External surface duly plastered by 12 MM thick including watering etc coMplete.

Making ceMent concrete foundation including excavation (60 x 60 x 150) cM deep in 1:3:6 ceMent concrete 20 x 25 MM stone Metal, (45 x 45 x 45) cM /45 cM dia. x 45 cM height plinth duly plastered, with necessary curing and finishing coMplete. (above 6 M to 9 M poles)

Making ceMent concrete foundation including excavation (60 x 60 x 150) cM deep in 1:3:6 ceMent concrete, (20 to 25) MM stone Metal with necessary curing and finishing coMplete.(for stay).

Making ceMent concrete foundation in 1:3:6 ceMent concrete, (20 to 25) MM. stone Metal duly plastered with necessary curing for coMplete. (pole Muffing or any other purpose).(2 x 1.5 x1)

131041F of 2021-2022Providing Street light in the CaMpus of New Dist Court,Malshiras Dist Solapur

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.MM (30 no. x 0.25 MM dia.) 3 core flexible Multi stranded copper Industrial cable for voltage grade up to 1.1 kV( 12x 20 nos+6 x 4 nos)

Supplying and erecting LED Street light fitting suitable for above 40W to 48W laMp, including laMp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluMiniuM alloy and heat sink extruded aluMiniuM coMplete per specification No . FG- ODF/FLS2.

Supplying and erecting Gate/garden light fitting with 200MM dia. glass bowl suitable for upto 12W LED laMp on provided pipe as per specification No. FG-ODF/GLT

Supplying and erecting 10-12W, 230V integral type LED LaMp suitable for B-22/E-27 base.

Supplying, erecting and Marking SPMCB 0.5A to 5A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and Marking FPMCB 6A to 32A in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting CRCA sheet Metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI fraMe coMplete.

Supplying, erecting & terMinating XLPE arMoured cable 4 core 4 sq. MM. aluMiniuM conductor with continuous 5.48 sq. MM. (12 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting G.I. pipe ‘A’ class 40 MM dia. erected for enclosing XLPE arMoured cable on wall/pole as per specification no. CB-CE

Supplying and laying (including excavation of suitable width & depth up to 90 cM) 50 MM outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth coMplete.

Supplying and erecting FRP box of size 150 x 125 x 100 MM, 2.7 MM thick coMplete on pole/wall as per specification no. CB-SB

Providing and erecting 6 M high (clear height) galvanised octagonal pole with foundation bolts having bottoM of 130 MM A/F, top 70 MM A/F on provided foundation as per specification no. OH- PL/OPL

Providing and erecting galvanised 1000MM single arM sword type bracket with FRP doMe and ball as per specification no. OH- PL/PBKT

Providing and erecting galvanised 1000MM double arM sword type bracket with FRP doMe and ball as per specification no. OH- PL/PBKT

Providing pipe type earthing with 40MM. dia. G.l. pipe or 20 MM dia. G.l. Rod coMplete with all Materials as per specification no. EA- EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI claMps fixed on wall painted with bituMinous paint in an approved Manner with joints required. As per specification no EA-EP.( 1.5 M x 25 nos =37.5 M x0.59 Kg/M)

Making M- 20 grade reinforced ceMent concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.M at 1.5 M depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of teMplate, duly plastered as per design coMplete (for 6M to 8M high octagonal /conical GI pole).

131041H of 2021-2022 Providing Fire Fighting and Fire AlarM SysteM for New District Court Building at Malshiras Dist Solapur

Supplying, installing, testing and coMMissioning of of Support coMprising of threaded suspension rod with bullet fastener, threaded at both ends, flexible sleeve with supporting arrangeMent for sprinkler piping of various diaMeters , coMplete in all respect. ( NON CSR)

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting Machine in proper Manner and finishing the site as original.

Supplying and fixing auto glow ( viewing upto 15 Mtr length) fire signages viz Fire hydrant, Fire Extinguisher, Fire exit, Fire Door, Fire Hose box etc size of 600 x 200 MM( NON CSR)

Supplying and erecting iron, sheet Metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding coMplete erected at the position with necessary Materials duly painted with one coat of red oxide and two coats of enaMel paint to Match the switchgears or as per directions by the authority.

Supplying, erecting & terMinating XLPE arMoured cable 3½ core 50 sq. MM. aluMiniuM conductor with continuous 5.48 sq. MM. (12 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terMinating XLPE arMoured cable 4 core 6 sq. MM. aluMiniuM conductor with continuous 5.48 sq. MM. (12 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terMinating XLPE arMoured cable 4 core 10 sq. MM. aluMiniuM conductor with continuous 5.48 sq. MM. (12 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing and erecting Hot dipped galvanized perforated type cable tray Manufactured froM 16 swg (1.6 MM thick) GI sheet of 150 MM width & 75 MM height coMplete with necessary coupler plates & hardware in approved Manner.

Providing earthing with copper earth plate size 30 x 30 x 0.315 cM coMplete with all Materials, testing & recording the results as per specification no. EA-EP

Providing pipe type earthing with 40MM. dia. G.l. pipe or 20 MM dia. G.l. Rod coMplete with all Materials as per specification no. EA- EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI claMps fixed on wall painted with bituMinous paint in an approved Manner with joints required. As per specification no EA-EP.

Providing Round bottoM fire bucket of 9 Litres capacity as per IS : 2546 Made out of 24 gauge G.I. sheet with extra handle at bottoM duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook coMplete.

Providing Floor Mounting stand for keeping 4 Nos. of FIRE buckets 1500MM in length, 900MM in height fraMe Made out of 30x30x4 MM angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint coMplete.

Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 Kg. capacity cartridge type conforM to IS 2878 /15683 coMplete erected with necessary claMp Made froM 50 x 6 MM. M. S. flat with nut & bolts grouted in wall coMplete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 Kg capacity with necessary claMp for erection on wall.

Supplying and erecting autoMatic control panel for 3 Ph, 415 volt, a.c. SubMersible/centrifugal puMp set upto 20 HP consisting of Star Delta starter having relay range 13-21AMp,S.P.P., CoMbined aMMeter/ voltMeter, phase indicating laMp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase iMbalance etc .

Supplying, installing, testing and coMMissioning of with perfect aligning, proper levelling of fire service Main single stage puMp, of 1800 LPM at 76 M head centrifugal type, 50 HP (37 kW), 3 phase, 415 volt, 50Hz or of suitable HP coMplete as per specification no. FF-MFP/SSC

Supplying, installing, testing and coMMissioning of with perfect aligning, proper levelling of jockey puMp of 240 LPM at 56 M head, 15 HP (11 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/JP

Supplying, installing, testing and coMMissioning of with perfect aligning, proper levelling of booster puMp of 900 LPM at 40 M Head, 12.5 HP (10 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/BP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 MM dia with necessary fittings coMplete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 MM dia with necessary fittings coMplete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 MM dia with necessary fittings coMplete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 MM dia with necessary fittings coMplete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 MM dia with necessary fittings coMplete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 MM dia with necessary fittings coMplete as per specification no. FF-PP

Providing coating of bituMen paint & 4MM thick wrapping for underground 100 MM ring Main of fire fighting systeM.

Providing coating of bituMen paint & 4MM thick wrapping for underground 150 MM ring Main of fire fighting systeM.

Supplying and erecting cast iron foot valve ball type/flap type of size 100 MM dia with strainer for negative suction coMplete as per specification no. FF-VL/FV

Supplying and erecting cast iron foot valve ball type/flap type of size 150 MM dia with strainer for negative suction coMplete as per specification no. FF-VL/FV

Supplying and erecting 100 MM dia end line strainer for positive suction coMplete as per specification no. FF-VL/ELS

Supplying and erecting cast iron double flange butterfly valve of size 50 MM dia. coMplete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange butterfly valve of size 75/80 MM dia. coMplete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange butterfly valve of size 100 MM dia. coMplete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange butterfly valve of size 150 MM dia. coMplete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange NRV of size 75/80 MM dia coMplete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 100 MM dia coMplete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 150 MM dia coMplete as per specification no. FF-VL/NRV

Supplying and erecting gun Metal gate valve of size 25 MM dia coMplete as per specification no. FF-VL/GV

Supplying and erecting gun Metal single outlet hydrant valve fitted with necessary accessories coMplete as per specification no. FF-VL/HV

Supplying and installing one piece Moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories coMplete as per specification no. FF-FFA/PT

Supplying and installing wall Mounting swinging Hose reel druM fitted with 19 MM dia. 30M long high pressure polypropylene (Polyhose) fitted with necessary accessories coMplete as per specification no. FF-FFA/HV

Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63MM dia, 15M in length, fitted with necessary accessories coMplete as per specification no. FF-FFA/RRL

Supplying and erecting gun Metal branch pipe of 63 MM dia fitted with 20 MM dia detachable hexagonal nozzle coMplete as per specification no. FF-FFA/NZ

Supplying and erecting fire brigade header of 150 MM dia, for supplying water in fire tank coMplete as per specification no. FF- FA/FBC

Supplying and erecting fire brigade header (SiaMese connection) of 150 MM dia for supplying water to wet riser systeM coMplete as per specification no. FF-FFA/SMC

Supplying and installing air vessel of 300 MM dia 1.5M in height M.S. tank installed inside puMp house / on terrace coMplete as per specification no. FF-FFA/ACT

Supplying and erecting 20/25MM dia gun Metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser coMplete as per specification no. FF-FFA/ARV

Supplying and installing pressure gauge of 100 MM dia., 0-300 PSI or 0-14 Kg per cM square fitted with 12/15 MM dia. pad cock valve, and G.I. pipe, elbow etc. coMplete as per specification no. FF- FFA/PG

Supplying and installing pressure switch with 12/15 MM dia isolation valve, G.I. nipple, elbow, etc coMplete as per specification no. FF-FFA/PS

Supplying and erecting one no. brass orifice plate having 6 MM. thickness, 140 MM outer dia and required/proper diaMeter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 MM.) Made froM 16 SWG sheet and angle iron 25 x 25 x 4 MM. having front doors with viewing glass (8"x6") and locking arrangeMent with necessary fixing Material such as rubber bidding etc. duly painted in post box red colour.

Supplying, installing, testing and coMMissioning of optical type sMoke detector coMplete on box as per specification no. FF- FAS/SD

Supplying, installing, testing and coMMissioning of Manual call Pt (Pill box) with break glass push button in Metal enclosure coMplete as per specification no. FF-FAAS/MCP

Supplying, installing, testing and coMMissioning of hooters with CRCA enclosure coMplete as per specification no. FF-FAAS/HTR

Supplying, installing, testing and coMMissioning of reMote response indicators coMplete as per specification no. FF-FAAS/RRI

Supplying, installing, testing and coMMissioning of FRLS, XLPE arMoured cable 2 core 1.5 sq.MM. copper conductor coMplete erected on wall/ ceiling coMplete as per specification no. CB- LT/CU

Supplying, installing, testing and coMMissioning of 6 Zones Microprocessor based conventional fire alarM control panel (FACP) with standard accessories coMplete as per specification no. FF-FAAS/FACP

Supplying, erecting, testing and coMMissioning of 15 MM (½") dia. NBCM Body chroMe finished quartzoid bulb sprinkler having 68º C fixed teMperature rating with deflector disc of conventional construction coMplete as per specification no. FF-SPR

Supplying, erecting, testing and coMMissioning of vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of Main line or branch lines of 100 MM dia having following features 1) Visual switch activation 2) Rugged switch asseMbly 3) Heavy duty aluMiniuM pipe saddles 4) Durable Metal enclosure 5) Steel U bolts for secure Mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes

Excavating soft MuruM / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by reMoving debris & Making the site good coMplete.

Supplying and erecting non return valve 50 MM dia in position Made of gun Metal coMplete.

131041G of 2021-2022Providing Solar Energy SysteM for New Court Building at Malshiras Dist Solapur

Supplying, installing, testing and coMMissioning of 25 kWp capacity on grid solar power pack with GI Mounting structure and inter connecting wires / cables without battery bank SPV Modules and solar power conditioning unit of required capacity coMplete, with 5 years on site perforMance warrantee. Specification no. ESD-RT- ONG

Supplying, erecting and Marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting CRCA sheet Metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI fraMe coMplete.

Supplying and erecting LT CT Multifunction DLMS coMpliance energy Meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, Measures & displays trivector energy, load survey, TOD, taMper detection & logging, power ON /OFF events, instantaneous paraMeters of rating 1/5 A with display in absence of power coMplete with zero adjustMent & test certificate froM Manufacturer erected on provided M.S. box and connected to CTs.

Supplying and erecting AC three phase LT CT Multifunction net Meter DLMS coMpliance of accuracy class 0.5, 3 x 240V, 50Hz, with backlit LCD display, optical port & RS 232 port (Measures iMport kWh, kVAh, export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 Months history of energy, load survey,TOD, taMper detection & logging, power ON/OFF events, instantaneous paraMeters of rating 1/5A with display in absence of power) with wiring connections and Mounting hardware on provided panels coMplete with calibration certificate froM Manufacturer.

Supplying, installtion & Marking of surge arrestor/ surge protection device at the Main distribution board after the incoMing breaker of type 1+2 tested for IMax 50 kA for three phase and neutral as per specification no. CP-SPD

Supplying, erecting & terMinating XLPE arMoured cable 4 core 10 sq. MM. aluMiniuM conductor with continuous 5.48 sq. MM. (12 SWG) G.I. earth wire coMplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cM coMplete with all Materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI claMps fixed on wall painted with bituMinous paint in an approved Manner with joints required. As per specification no EA-EP 25 x3 --0.59 Kg/Mtr total 20.6 Mtr x 2 nos =41.2 Mtr )

Dhansmruti Buildcon Pvt Ltd

Madhukamal Construction Co. Vita

Pawar Patkar Constructions Pvt.Ltd.

M/s. Baba Construction, Aurangabad

Harsh Constructions Pvt Ltd