GE/C-23/2024-25 PROVN OF CERTAIN SANCTION WORK IN THE AREA OF AGE B/R-I AND AGE B/R-II (CENTRAL) UNDER GE (CENTRAL) DELHI CANTT-10

Amount

S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Roof trusses (framed), truss, framed brackets of angles, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel flat or hollow sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed by Engineer-in-Charge.

M & L for painting new or previously untreated steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described with two coats of synthetic enamel paint over a coat of red oxide complete all as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as directed.

M & L Cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete as in sub base all as specified.

M&L for Surface dressing n exc 15 cm deep and site clearance complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry laid over 15mm thick screed bed in cm 1:6 as in floors with no pigment complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 on any faces of concrete or brick surfaces of walls or chajjas or pillars finished even and smooth without using extra cement including scaffolding and necessary formwork if required including taking down old plaster complete all as specified.

M & L for preparation of new plastered surface of wall and applying three coat of cement base paint including scaffolding if required complete all as specified and directed by Engr-in-Charge.

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mm section window grill as per approved sample and as per IS specifications joining cleat for fixing etc. complete all as specified.

M&L anodised aluminium window/door and ventilator shutters, sliding or side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized iron staples including wooden beadings, complete all as specified and directed.

S&F 4.00 mm thick plain glass, pin head type and glazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified.

Taking down aluminium door/ window frame including shutter of any description not exc 1.50 Sqm each and removing from site.

Taking down aluminium door/ window frame including shutter of any descriptiont area exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified.

Excavation in trenches n. exceeding 1.5m wide and n. Exc 1.5 mtr in depth, for foundation etc, ior for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out in any type of soil.

M & L for RCC M - 25 Design mix concrete as in Col footing, Col up to bottom of PB & in Plinth beam complete.

M & L for RCC M - 25 Design mix concrete as in Col above Plinth Beam

M & L for Formwork to sides of concrete foundations, footings, bases of columns, columns up to PB and plinth beams; and similar work; vertical or to batter Fair finished surfaces.

M & L for Formwork to sides of pillars, posts, struts, piers, columns etc fair finished surface.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

All as per item Sl No 22 above but 8 to 10 mm dia as in stirrups, binders etc

M&L for 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed compound complete.

M&L for PCC 1:3:6 C-1 using 20mm graded stone aggregate as in coping, all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc. complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in walls with old size bricks, built in cement mortar 1:4, complete all as specified.

All as per ser item No 27 above here in before but except bricks.

S&F mild steel work as in angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, and similar works conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified and as directed.

Removing of excavated material n.exc 50mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified and directed.

S&F razor blade barbed concertina coil having minimum weight of 15.2 kgs (+) or (-) 5 % per coil stretched to a length of 10 to 12 mts to achieve 600mm dia as in fencing to steel posts and to another coil/MS nibs all as shown on drawings including fixing with special galvanized fastners such as clips,c clips,U clips all as specified and directed by engineer in charge.(Note Linear length of coil after stretching and fixing shall be measured for purpose of payment.)

Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Schedule of Credit

imran construction company

ANSH VANSH CONSTRUCTION COMPANY

M/s Verma and Co

SHREE RAM BUILD TECH

M/S ANIL KUMAR

M/S Parmod Johar

M/S GR construction compony

M/S MSD & Associate

a.k constructions